Abstract:Fiber Bragg grating optical sensors are nowadays widely employed for strain measurement for structural health monitoring and in experimental mechanics. Compared to other techniques, i.e. electrical strain gauges, fiber Bragg grating offer immunity to electromagnetic interference and allow for long transmission lead lines. Moreover, thanks to multiplexing interrogation, several sensors can be photo-imprinted into a single fiber core allowing for strain evaluation at multiple locations simultaneously. They have high adaptability to composite materials, particularly because it is possible to be embedded into laminates without affecting their strength and stiffness. Fiber Bragg grating strain measurements are based on the detection of the wavelength shift of their peak reflected spectrum. However, subjected to strain gradients, the spectral response of fiber Bragg grating sensors may be distorted and the sharp peak may not be retained. In this work, the response of fiber Bragg grating sensors having different grating lengths and bonded to the surface of a carbon fiber-reinforced twill woven laminate was analyzed. The analysis combined transfer matrix (T-matrix) with digital image correlation methods. Digital image correlation technique was used to capture the non-uniform strain fields in the woven composites and measured strains were employed in T-Matrix algorithm to simulate fiber Bragg grating response. Using this approach, the effect of the length of the fiber Bragg grating on the strain measurement is assessed and results discussed. Moreover, it is shown that T-matrix formulation combined with a non-contact strain field measurement technique, as DIC, is an appropriate technique to simulate the behavior of fiber Bragg grating bonded to composite materials of complex microstructure.

Contrast Analyses of Strain Measurement of Fiber Grating and Resistance Strain Chip

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Comparison Analysis of Fiber Bragg Grating and Resistance Strain Gauge Used in Quayside Container Crane Structural Health Monitoring

Experimental research on strain distribution measurement of PC beams based on weak grating array sensing technology

Strain Measurement Technology and Precision Calibration Experiment Based on Flexible Sensing Fiber

Theoretical Research On The Strain Characteristics Of The Selective-Filling Birefringent Photonic Crystal Fiber

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Study on Real-Time Reinforcement Stress Measurement Based on Brillouin Optical Time Domain Analysis

Research on basic principle and calibration experiment of fiber bragg grating sensor

Study of Sensing Properties and Contrastive Analysis of Metal Coating Optical Fiber Grating

Optical strain sensor using median density grating foil: Rivaling the electric strain gauge

Experimental Study of Measuring Strain by Fiber-Optic Sensor Used in Civil Engineering Structures

Experimental analysis of the response of fiber Bragg grating sensors under non-uniform strain field in a twill woven composite

Compact Fiber Strain Sensor Fabricated by a CO2 Laser.

Study of FBG Strain Sensors Based on Similar Materiel in Zonal Disintegration Model Test

Diffraction Grating Strain Gauge Method: Error Analysis and Its Application for the Residual Stress Measurement in Thermal Barrier Coatings

Experimental Study on Cross-sensitivity of Temperature and Strain of Fiber Optic Bragg Gratings

A Novel Strain Sensor Based on a Pair of Fiber Bragg Grating Comb Filters

Research of Simultaneous Measurement of Temperature and Strain of Fiber Optic Cable Material

Design and characteristic research of smart rod based on optical fiber grating for strain monitoring of power transmission tower