Abstract:This study presents a novel synthesis route for high-entropy alloys (HEAs) and high-entropy metallic glass (HEMG) using radio frequency (RF) magnetron sputtering and controlling the HEA phase selection according to atomic size difference (δ) and film thickness. The preparation of HEAs using sputtering requires either multitargets or the preparation of a target containing at least five distinct elements. In developing HEA-preparation techniques, the emergence of a novel sputtering target system is promising to prepare a wide range of HEAs. A new HEA-preparation technique is developed to avoid multitargets and configure the target elements with the required components in a single target system. Because of a customizable target facility, initially, a TiZrNbMoTaCr target emerged with an amorphous phase owing to a high δ value of 7.6, which was followed by a solid solution (SS) by lowering the δ value to 5 (≤6.6). Thus, this system was tested for the first time to prepare TiZrNbMoTa HEA and TiZrNbMoTa HEMG via RF magnetron sputtering. Both films were analyzed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy, field emission scanning electron microscopy cross-sectional thickness, and atomic force microscopy (AFM). Furthermore, HEMG showed higher hardness 10.3 (±0.17) GPa, modulus 186 (±7) GPa, elastic deformation (0.055) and plastic deformation (0.032 GPa), smooth surface, lower corrosion current density (Icorr), and robust cell viability compared to CP-Ti and HEA. XRD analysis of the film showed SS with a body-centered cubic (BCC) structure with (110) as the preferred orientation. The valence electron concentration [VEC = 4.8 (<6.87)] also confirmed the BCC structure. Furthermore, the morphology of the thin film was analyzed through AFM, revealing a smooth surface for HEMG. Inclusively, the concept of configurational entropy (ΔSmix) is applied and the crystalline phase is achieved at room temperature, optimizing the processing by avoiding further furnace usage.

Developing New Type of High Temperature Alloys–High Entropy Superalloys

High Temperature Properties of Advanced Directionally-Solidified High Entropy Superalloys

The High Temperature Tensile and Creep Behaviors of High Entropy Superalloy

Hierarchical Microstructure Strengthening in a Single Crystal High Entropy Superalloy

High Temperature Oxidation and Corrosion Properties of High Entropy Superalloys

Industrial Development of High-Entropy Alloys

High-Entropy Alloys – A New Era of Exploitation

Precipitation-hardened High-Entropy Alloys for High-Temperature Applications: A Critical Review

Towards high-entropy alloys with high-temperature corrosion resistance and structural stability

Control of Nanoscale Precipitation and Elimination of Intermediate-Temperature Embrittlement in Multicomponent High-Entropy Alloys

Precipitation-hardened High Entropy Alloys with Excellent Tensile Properties

A hypoeutectic high-entropy alloy with hierarchical microstructure for high-temperature application

A high-entropy high-temperature shape memory alloy with large and complete superelastic recovery

Alloy Design Strategies and Future Trends in High-Entropy Alloys

Resent Development in High-Entropy Alloys and Other High-Entropy Materials

High-entropy Alloys: an Overview on the Fundamentals, Development, and Future Perspective

Alloy Design and Properties Optimization of High-Entropy Alloys

On The Superior High Temperature Hardness of Precipitation Strengthened High Entropy Ni‐Based Alloys

Exploring the Compositional Space of High-Entropy Alloys for Cost-Effective High-Temperature Applications

A promising new class of high-temperature alloys: eutectic high-entropy alloys

Design and Development of High-Entropy Alloys with a Tailored Composition and Phase Structure Based on Thermodynamic Parameters and Film Thickness Using a Novel Combinatorial Target