Abstract:This article aims to produce NiTi shape memory alloys, which show superelasticity and shape memory effect, as well as good biocompatibility and corrosion properties, in open and porous sizes ranging from 100-500 μm, which are required for use as implants. This structure of pores is necessary to allow tissue growth and fluid flow inside the implants. Many powder metallurgy methods have been used in producing porous NiTi shape memory alloys. However, the packaging pressure used in these methods has not successfully created the desired pore distribution, shape, and size. The methods by which it can be produced are costly in terms of cost. In the study, production was carried out by sintering the powder mixture poured into molds without pressure with the help of binder polymers. This sintering process was carried out in an argon atmosphere for 1 hour at temperatures 1050, 1125, and 1200 °C. The study shows that pressureless loosen sintering can produce porous NiTi alloys, which is the more straightforward method. The pore distribution and proportions were examined. Homogeneous distribution and pores in desired sizes are created. It has also been determined that the binder polymer has a space-retaining effect. It was determined at which temperature the alloy sintered at different temperatures contained the desired B2 austenite phase for superelasticity. Austenite start and finish temperatures were determined for the alloy produced at each sintering temperature. As a result of this research, it was determined which phase was denser at which temperature, and the phase transformation temperatures were found. The exact temperature measurements can be calculated by changing the sintering time parameter. In addition, the change in phase transformation temperatures can be measured by heat treatment after sintering. Porous NiTi alloys can be used as dental and medical implants thanks to their excellent biocompatibility and corrosion resistance. This method will decrease production costs, and more people will have access to this material. In general, the mechanism of sintering methods is joining the points in contact with the packaging pressure by necking. In this study, the combination of the grains with the polymer without packaging pressure with the thermal expansion mechanism reveals the originality of the study.

Properties of Porous NiTi Shape Memory Alloys Prepared by Thermal-Explosion Reaction Synthesis

Control of porosity and superelasticity of porous NiTi shape memory alloys prepared by hot isostatic pressing

High Porosity and High-Strength Porous NiTi Shape Memory Alloys with Controllable Pore Characteristics

High-strength porous NiTi shape memory alloys with stable cyclic recovery properties fabricated using elemental powders

Preparation of High-Porosity Niti Alloys by Powder Sintering with Nacl Pre-Forming

Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering.

Pore Formation Mechanism and Characterization of Porous NiTi Shape Memory Alloys Synthesized by Capsule-Free Hot Isostatic Pressing

Gradient Porosity and Large Pore Size NiTi Shape Memory Alloys

INVESTIGATION OF THE EFFECT OF SINTERING TEMPERATURES ON THE PRODUCTION OF POROUS NITI ALLOY BY LOOSEN SINTERING METHOD

Plasticity of Porous NiTi Alloys Obtained by Self-propagating High-temperature Synthesis in Closed and Open Gas Flow Reactors

Pore Control in Porous NiTi Alloy Produced by Combustion Synthesis Method with the Utilization of Space Holders

Superelastic properties of porous TiNi shape memory alloys prepared by hot isostatic pressing

Microstructure and Mechanical Properties of Porous NiTi Alloy Prepared by Integration of Gel-Casting and Microwave Sintering

Stucture and Properties of Porous NiTi Shape Memory Alloys Fabricated by Low Pressure Sintering

Pore structures of high-porosity NiTi alloys made from elemental powders with NaCl temporary space-holders

Characterization of high-strength Ti–Ni shape memory alloys prepared by hot pressed sintering

Mechanical response of mesoporous amorphous NiTi alloy to external deformations

Nickel Release Behavior, Cytocompatibility, and Superelasticity of Oxidized Porous Single-Phase NiTi.

Effect of Structural Configurations on Mechanical and Shape Recovery Properties of NiTi Triply Periodic Minimal Surface Porous Structures

Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying and Hot Isostatic Pressing

Preparation, microstructure and compressive property of NiTi alloy hollow spheres fabricated by powder metallurgy