Rresearch of Embedded GUI Based on Object-Oriented Technology and Application of Designed Patterns

钱华锋,雷航

2004-01-01

Abstract:In this paper,after developing an Embedded GUI Model(EGUI Model) with Object-Oriented technology and designed patterns,the key technologies of embedded GUI are introduced,such as the structure and the portability of the system and visual programming environment. Designed Patterns are used in the development process.

What problem does this paper attempt to address?

The Design Schemes of Embedded Interaction Systems and Their Comparison

邹常青,谭家杰

DOI: https://doi.org/10.3969/j.issn.1673-0313.2011.06.014

2011-01-01

Abstract:The design of interaction system is an important part of embedded system products. This paper introduced three inter- action systems, namely QT/MINIGUI-Based scheme, Browser-Based scheme and FLASH-Based scheme. The paper also com- pared the performances of the three schemes on the CC1200 platform and analyzed their advantages and disadvantages. Lastly the paper predicted the development trend of interaction system. All these will be helpful to the design of embedded interaction system.
Design and implementation of object-oriented graphical user interface

YaMing Zhang,Junyi Shen,Yaohu Liu

1995-01-01

Abstract:After analysing the state of the user interface development methods and tools, this paper raises an idea of developing graphical user interface with object modeling technology to design and implement object-oriented graphical user interface (GUI). The core of GUI includes supporting platform of GUI graphical editor and tools. In this paper, the design and implementation of the three core parts of the GUI are discussed. The authors used not only object-oriented technology to analyse and design the system, but also C++ language which is based on DOS, so the system is of good integrity, reusability and maintainability.
GUI System Based on the Communication Mechanism of Qte

Wenxi Yao

2007-01-01

Abstract:Recently,the embedded sytem has been used widely.At the same time,the development of the GUI is more and more important.The inter-process and inter-object communictaion of Qt/Embedded was given.Taking the bearing fault diagnose system for an example,the design and realization of the GUI system were presented in detail,combined with the unique signal/slot mechanism.The experiments prove that the improved method can meet the real time requirements.
An Empirical Study of the GUI Development of Embedded NC System

LU Wei,FU Jianzhong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.09.076

2006-01-01

Abstract:An S3C2410 chip based embedded NC system and its composition of hardware and software were introduced.The development of embedded GUI in Host-Target Mode and the application in the project were discussed,which include the cross compile target platform and the virtual frame buffer of the host platform and so on.
Soft Design of Embedded Robotics Teaching System

朱志强,王宣银,张阳

DOI: https://doi.org/10.3969/j.issn.1001-2265.2008.09.005

2008-01-01

Abstract:Teach system is widely used in welding robot,Users control robot to weld by Teach system.So,the practicability of welding robot depends on function and interface of teach system.Design and realization of Software of teach system which based on the real-time KernelμC/OS-Ⅱ is introduced.The system includes operating system、GUI interface and network communication.It first introduces the main modules,then functional planning and development of teaching box,and design of interface based on GUI is dealt with.At last,realization of the communication between the teaching system and the host controller based on LwIP are specified in detail.Now,development and test has been done,industrialization is carried on.After test and preliminary use of the system,it was proved that the teach system had characteristics of nice interface,comprehensive functions,practicability,and it can satisfy expected requirements of industry.
Software System Design and Implementation Based on Principle of Modularized Serial Processing Model

HUANG Xin,CHEN Qi

DOI: https://doi.org/10.3969/j.issn.1000-7024.2005.12.088

2005-01-01

Abstract:People are looking for ways of designing and implementing software systems that are clearer,more reusable and more extensible all through the time.The principle of modularized serial processing modal was explained,and the detailed methods of design and imple-mentation were produced based on this thought,which explained the feasibility and realization of this model.Then,this idea was cry-stallized by presenting a real project,where this model was applied to the design and implementation of SVGS.
Embedded Linux Graphic Terminal Design Based On ARM

liu junliang,pan gang,li ping

DOI: https://doi.org/10.1109/CHICC.2006.280886

2007-01-01

Abstract:An embedded graphic user interface (GUI) terminal which is used in ship positioning system based on Global Position System (GPS) is designed. The basis system software and hardware frames are introduced firstly. Then the procedure to make an appropriate embedded Linux system is discussed, and also for the transplantation of miniGUI. At last it explains how to implement a GUI application program based on the embedded Linux and miniGUI platform.
Research and Porting of Embedded GUI Based on ARM LINUX

Jing-zhou JI,Yu-zhuo FU

DOI: https://doi.org/10.3969/j.issn.1006-9348.2005.03.067

2005-01-01

Abstract:With the development of embedded system and improvement of the requirements from customers, embedded GUI which was used to communicate between users and embedded system became to be a key in researching the embedded system. This article firstly introduced what is embedded system and what is embedded GUI. What's more, the necessary of developing GUI based on embedded linux is also explained. Then three kinds of embedded GUI's (Microwindows,MiniGUI and QT) architectures,traits and disadvantages were also introduced. Finally, it described the porting of each embedded GUI on ARM Linux platform, including the establishment of compile environment,configuring and modifying of compile options and setting of runtime parameters.
The Design of Embedded Socket Software

ZHANG Han,FENG Dong-qin

DOI: https://doi.org/10.3969/j.issn.1000-0682.2007.02.016

2007-01-01

Abstract:This paper makes a study of the principle of an embedded UDP stack socket,and presents the design conception of the socket tasks run in the kernel of an embedded operation system along with the real-time application run in the socket task to ensure its real-time demand.These applications perform in an interface mode,which is different from the kernel mode and the user's mode in the embedded operation system.
Design of High Performance and Configurable Graphical User Interface in Embedded Environment

FANG Feng-ping,CHEN Chun

DOI: https://doi.org/10.3321/j.issn:1002-8331.2006.30.033

2006-01-01

Abstract:This paper analyzes the requirements of GUI system in embedded environment,and explains the pros and cons of several existing GUI systems.At the same time,a high performance and configurable GUI system,named SMART GUI,is implemented.
Design and Implement of ETOP-A Embedded Windows System

陈文智

DOI: https://doi.org/10.3969/j.issn.1000-7024.2001.06.013

2001-01-01

Abstract:Along with the coming era of Post PC, embedded system has been becoming one focus research field of IT industrial. Based on the embedded Linux OS,one embedded window system──ETOP and one embedded web browser──ECAMATop have been developed.This paper introduces ETOP in detail including its structure, working theory, and implement.
Object-oriented Model and Design Patterns in Web Applications

葛亮,叶恩,施伯乐

DOI: https://doi.org/10.3969/j.issn.1000-3428.2003.14.017

2003-01-01

Abstract:This paper introduces an object-oriented model of Web applications and its XML-based modeling language.It provides a better infrastructure to allow a smooth transition from design to implementation,higher quality applications,and heavier implementation reuse.And it presents how to integrate design patterns into the object model to improve design quality of a Web application.
Application of UML for Embedded System Design

WU Li-jun,ZHANG Yi-gang,JIANG Shou-da

DOI: https://doi.org/10.3321/j.issn:0367-6234.2005.09.029

2005-01-01

Abstract:In order to develop good quality software with reusability and extensibility the design process of object - oriented analysis method based on UML is discussed. The method of modeling embedded system based on UML is introduced by taking ECG recorder for example. Results indicate that UML, which has received new ideas .methods and techniques from software engineering, not only supports object - oriented system analysis and design but also the whole process in software development beginning with requirement analysis. Modeling a software system based on UML is both helpful to communication and maintenance.
Design patterns in object oriented analysis and design

Shuai Jiang,Huaxin Mu

DOI: https://doi.org/10.1109/ICSESS.2011.5982229

2011-01-01

Abstract:Design pattern is a general reusable solution to a commonly occurring problem in software development. Good OO designs are reusable, extensible and maintainable. Patterns only give you a general rule not code. Patterns show you how to build systems with good OO design qualities. Most of them address issues of change in software and allow some part of a system to vary independently of all other parts by trying to take what varies in a system and encapsulate it. Patterns also provide a shared language that can maximize the value of your communication with other developers. In this paper, we briefly introduce the concept of software design pattern and give a research on some design patterns including Strategy Pattern, Iterator Pattern, Adapter Pattern and Façade Pattern. © 2011 IEEE.
The Development on GUI for Embedded Linux System

Ziqiang Wang

2005-01-01

Microprocessors

Abstract:We introduced the development of GUI for embedded Linux system,Then we analyzed the design methods of embedded GUI and discussed how to accomplish region algorithm for multi-process and multi-window on mass devices,especially how to implement the management of multi-windows by Z order and tree structure.Finally we discussed features of our GUI.
Model-based Design of Embedded Software

杨丽莎,王慧

DOI: https://doi.org/10.3969/j.issn.1001-3695.2004.12.025

2004-01-01

Abstract:This paper analyzes the characteristics of embedded software differentiated from general purpose software. Then it describes model-based design of embedded software and presents the main point of embedded software design integrated with reusable components. To the end, it lays emphasis on actor-Oriented design of embedded software.
Lightweight GUI Components Library Development Oriented to Embedded Industry Monitoring System Based on Qt/E

谭大鹏,李培玉,潘晓弘

DOI: https://doi.org/10.1109/iccit.2007.166

2007-01-01

Abstract:Aiming at some problems of embedded industry monitoring system graphic user interface (IMS-GUI) such as large occupation space, bad configuration ability and poor real-time performance, an embedded IMS-GUI components library realization method based on Qt/E was put forward. The Qt/E library file was tailored according to basic requirement of IMS. Using multi-thread method, system parallel processing abilities of data collection, analysis and display were enhanced, and real-time performance and rapidity were guaranteed. By internal communication interface of Qt, the message mapping mechanism which would not require call-back was realized, context switch speed was improved, and GUI development process would become simply. Based on modularization principle, combined with some related industry monitoring and fault diagnostic algorithms, GUI shared components library oriented to IMS was developed by primary C language, that could resolve the problem of cross-platform applicability and be configured and tailored for specific demand of users. Industry experiments proved that GUI developed by the components library has small occupation space and high real-time performance, can stably run in embedded platform environment, and supply powerful technical support for the interactivity of IMS.
Overviews on Design Methodologies for Embedded Software

熊光泽,古幼鹏,桑楠

2004-01-01

Journal of Computer Applications

Abstract:In embedded systems,resources are restricted and devices are customized. Computing is required to be real-time. So,software design methodologies must adapt to these characteristics of embedded system. In this paper,characteristics and applications of the design methodologies for embedded software,including structured methodology,object-oriented methodology and component-based methodology,are studied. At the end of this paper,laws of evolution of the design methodologies are summarized and the direction of study on the design methodologies is indicated.
Research of Event Mechanism Based Embedded Graphical Programming Model

HAO Ruo-meng,CHEN Rong

DOI: https://doi.org/10.3969/j.issn.1673-629x.2007.10.001

2007-01-01

Abstract:Embedded graphical system is one of the hot topics in embedded research field.First,the structure of component based graphical system under Elastos operating system is presented.This graphical system supports an event mechanism based coding mode for graphical applications.The event mechanism based applications on graphical system of Elastos is different from traditional applications based on message drive mechanism.It's simple,effective as well as transparent to customers.It supports more means for graphical applications.It is convenient to develop applications of cellphones on Elastos.
A Model-Based Development Method for SmartOSEK OS

Zhigang Gao,Zhaohui Wu,Ruizhi Ye,Long Yue

DOI: https://doi.org/10.1109/CIT.2005.20

2005-01-01

Abstract:With their increasingly wide application in large systems, embedded systems become more and more complicated. However, up to now there has been no mature methodology in embedded software design. In order to resolve this problem, much research has been performed. Designing embedded software based on models has become one of the research focuses. At present, the research on the design of model-based embedded software mostly focuses on theoretical models and simulations, rarely involving in model transformations and implementations of systems. In this paper, a new model-based design method of embedded software is presented for an OSEK compatible operating system-SmartOSEK OS. It emphasizes the transformation from problem domain to implementation domain. First, we use Ptolemy II to model and simulate in problem domain. Then, the transformation from problem domain to implementation domain is carried out. We have developed a suit of tools to support the whole developing process from modeling to code generation. It has been proved that higher productivity and quality can be achieved by using this method.

Rresearch of Embedded GUI Based on Object-Oriented Technology and Application of Designed Patterns

The Design Schemes of Embedded Interaction Systems and Their Comparison

Design and implementation of object-oriented graphical user interface

GUI System Based on the Communication Mechanism of Qte

An Empirical Study of the GUI Development of Embedded NC System

Soft Design of Embedded Robotics Teaching System

Software System Design and Implementation Based on Principle of Modularized Serial Processing Model

Embedded Linux Graphic Terminal Design Based On ARM

Research and Porting of Embedded GUI Based on ARM LINUX

The Design of Embedded Socket Software

Design of High Performance and Configurable Graphical User Interface in Embedded Environment

Design and Implement of ETOP-A Embedded Windows System

Object-oriented Model and Design Patterns in Web Applications

Application of UML for Embedded System Design

Design patterns in object oriented analysis and design

The Development on GUI for Embedded Linux System

Model-based Design of Embedded Software

Lightweight GUI Components Library Development Oriented to Embedded Industry Monitoring System Based on Qt/E

Overviews on Design Methodologies for Embedded Software

Research of Event Mechanism Based Embedded Graphical Programming Model

A Model-Based Development Method for SmartOSEK OS