Abstract:The O-3-type layered Na(NixFeyMnz)O-2 (0 < x, y, z < 1) cathode materials have attracted great interest in sodium ion batteries due to the abundance and cost of raw materials and their high specific capacities. However, the cycling stability and rate capability at high voltages (> 4.0 V) of these materials remain an issue. In this work, we successfully synthesized a Li-substituted layered-tunneled (O3-spinel) intergrowth cathode (LS-NFM) to address these issues. The remarkable structural compatibility and connectivity of the two phases were confirmed by X-ray diffraction (XRD), selected area electron diffraction (SAED), and high-resolution transmission electron microscopy (HRTEM). The LS-NFM electrode reached a discharge capacity of 96 mAh g(-1) with a capacity retention of 86% after 100 cycles at a current rate of 100 mA g(-1) in a voltage window of 2.0-4.2 V. Moreover, the LS-NFM cathode exhibited an enhanced rate capability in comparison to the undoped single phased layered cathode (NFM). The enhanced rate capability of LS-NFM can be explained by the significantly increased effective Na+ diffusivity measured by the galvanostatic intermittent titration technique (GITT) compared to the undoped control NFM cathode, which can be ascribed to the improved charge transport kinetics through shortened diffusion path by direct connection between the 3D channels in the spinel phase and 2D channels in the layered phase. The results from ex situ hard/soft X-ray adsorption spectroscopy (XAS) suggest that the capacity of the LS-NFM cathode is mainly associated with the Ni2+/Ni4+ redox couple and slightly from the Fe3+/Fe4+ redox couple. The voltage profile of the LS-NFM cathode exhibits a reversible plateau above 4.0 V, indicating great stability at high voltages and structural stabilization by the spinel phase. In addition to the substitution of various transition metals, or the modification of the stoichiometry of each transition metal, this study provides a new strategy to improve electrochemical performance of layered cathode materials for sodium ion batteries.

New Insights into the Performance Degradation of Fe-Based Layered Oxides in Sodium-Ion Batteries: Instability of Fe3+/Fe4+ Redox in Α-Nafeo2

Effect of Electrolytes on the Cathode-Electrolyte Interfacial Stability of Fe-Based Layered Cathodes for Sodium-Ion Batteries

A Layer-Structured High Entropy Oxide with Highly Reversible Fe3+/Fe4+ Redox As Advanced Cathode Material for Sodium Ion Batteries

Suppressing Cation Migration and Reducing Particle Cracks in a Layered Fe-Based Cathode for Advanced Sodium-Ion Batteries

Clarification of underneath capacity loss for O3-type Ni, co free layered cathodes at high voltage for sodium ion batteries

Synergetic Anion–Cation Redox Ensures a Highly Stable Layered Cathode for Sodium‐Ion Batteries

Structure evolution of layered transition metal oxide cathode materials for Na-ion batteries: Issues, mechanism and strategies

Synthesis and Electrochemical Performance of Acetylene Gas Decomposed Fe-Based Layered Oxide Cathode Material for Sodium-Ion Batteries

Iron Migration and Oxygen Oxidation During Sodium Extraction from NaFeO2

Fluorinated Carbonate Electrolyte with Superior Oxidative Stability Enables Long‐Term Cycle Stability of Na2/3Ni1/3Mn2/3O2 Cathodes in Sodium‐Ion Batteries

Low-Cost Al-Doped Layered Cathodes with Improved Electrochemical Performance for Rechargeable Sodium-Ion Batteries

Li-Substituted Layered Spinel Cathode Material for Sodium Ion Batteries

Regulating the electrochemical activity of Fe-Mn-Cu-based layer oxides as cathode materials for high-performance Na-ion battery

Research progresses in O3-type Ni/Fe/Mn based layered cathode materials for sodium ion batteries

Realizing long-term cycling stability of O3-type layered oxide cathodes for sodium-ion batteries

Redox and structural stability for sodium-ion batteries through bond structure engineering

Synthesis-microstructure-performance relationship of layered transition metal oxides as cathode for rechargeable sodium batteries prepared by high-temperature calcination.

High-Entropy Layered Oxide Cathode Materials with Moderated Interlayer Spacing and Enhanced Kinetics for Sodium-Ion Batteries

Amorphous Aluminum Oxide-Coated NaFe 0.33 Ni 0.33 Mn 0.33 O 2 Cathode Materials: Enhancing Interface Charge Transfer for High-Performance Sodium-Ion Batteries

An Ordered Ni-6-Ring Superstructure Enables a Highly Stable Sodium Oxide Cathode

Entropy Strategy for Stabilizing O′3-NaMnO2-Layered Cathodes for Sodium-Ion Batteries