Effects of MXene on Nonisothermal Crystallization Kinetics of Isotactic Polypropylene.
Wanxin Peng,Ran Hu,Weijiao Jiang,Jian Kang,Jingping Li,Ya Cao,Ming Xiang
DOI: https://doi.org/10.1021/acsomega.1c02970
IF: 4.1
2021-01-01
ACS Omega
Abstract:MXenes, a family of two-dimensional transition-metal carbides/nitrides, have attracted great attention and shown promising application in polymer composites. In this study, a typical MXene Ti3C2T x was prepared by selective etching. The structure and morphology of Ti3C2T x were studied by X-ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy, and the results proved that Ti3C2T x was successively fabricated. Then, Ti3C2T x /isotactic polypropylene composites with different Ti3C2T x dosages were fabricated, and the nonisothermal crystallization kinetics and melting behavior of the composites were investigated. The results indicated that when a small amount of Ti3C2T x was added, the crystallization parameters including the crystallization peak temperature and the crystallization rate increased, suggesting that crystallization was promoted. When the weight percentage of Ti3C2T x exceeded 1%, the crystallization parameters showed a reverse trend, suggesting that crystallization was hindered. The activation energy of composites with 0, 0.25, 0.5, and 1 wt % Ti3C2T x were calculated to be -164.5, -196.5, -193.8, and -147.95 kJ/mol, respectively, revealing that the crystallization of composites is concentration-dependent. The impact of Ti3C2T x dosage on the crystalline structure of the composites was studied using XRD. The related mechanism was proposed.