Highly Sensitive and Selective Colorimetric Detection of Sulphide Using Ag–Au Nanoalloys: a DFT Study

Le Chang,Adrian Fisher,Zhiping Liu,Daojian Cheng

DOI: https://doi.org/10.1039/c5ra17361b

IF: 4.036

2016-01-01

RSC Advances

Abstract:For the colorimetric detection of S, SH, cysteine, and H2S, the sensitivity of Ag–Au nanoalloy is better than pure Ag cluster, and both of them possess high selectivity for the detection of S.

What problem does this paper attempt to address?

Au/AgI Dimeric Nanoparticles for Highly Selective and Sensitive Colorimetric Detection of Hydrogen Sulfide

Jingbin Zeng,Min Li,Ao Liu,Fan Feng,Teng Zeng,Wei Duan,Mengmeng Li,Mingfu Gong,Cong-Ying Wen,Yadong Yin

DOI: https://doi.org/10.1002/adfm.201800515

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:The development of Au/AgI dimeric nanoparticles (NPs) is reported for highly selective colorimetric detection of hydrogen sulfide (H2S). The detection mechanism is designed by taking advantage of the chemical transformation of AgI to Ag2S upon reacting with sulfide, which leads to a shift in the plasmonic band of the attached Au NPs. The plasmonic shift is accompanied by a color change of the solution from purplish red to blue and finally to light green depending on the concentration of sulfide, thus enables a naked‐eye readout and UV–vis quantitation of the sulfide exposure. The Au/AgI dimeric NPs are further immobilized in agarose gels to produce test strips, which can be used for both naked‐eye readout and quantitative detection of sulfide using UV–vis spectroscopy thanks to its transparency in the visible region. Compared to commercial Pb(Ac)2 test papers, the agarose gel strip has superior performance for detecting sulfide in terms of sensitivity, selectivity, stability, and fidelity. The agarose gel is also capable of detecting gaseous H2S at important concentration thresholds, suggesting its practicability in real life applications. The potential of agarose gels is further highlighted by its ability in the enrichment and colorimetric detection of gaseous H2S released during cell cultivation.
High-throughput Sulfide Sensing with Colorimetric Analysis of Single Au-Ag Core-Shell Nanoparticles.

Jinrui Hao,Bin Xiong,XiaoDong Chen,Yan He,Edward S. Yeung

DOI: https://doi.org/10.1021/ac500376e

IF: 7.4

2014-01-01

Analytical Chemistry

Abstract:We present a high-throughput strategy for sensitive detection of H2S by using individual spherical Au-Ag core-shell plasmonic nanoparticles (PNPs) as molecular probes. This method is based on quantification of color variation of the single PNPs resulting from formation of Ag2S on the particle surface. The spectral response range of the 51 nm PNP was specifically designed to match the most sensitive region of color cameras. A high density of immobilized PNPs and rapid color RGB (red/green/blue) analysis allow a large number of individual PNPs to be monitored simultaneously, leading to reliable quantification of color change of the PNPs. A linear logarithmic dependence on sulfide concentrations from 50 nM to 100 μM was demonstrated by using this colorimetric assay. By designing PNPs with various surface chemistries, similar strategies could be developed to detect other chemically or biologically important molecules.
An Au@Ag Nanocube Based Plasmonic Nano-Sensor for Rapid Detection of Sulfide Ions with High Sensitivity.

Lei Zhang,Junxia Zhang,Fei Wang,Jingjing Shen,Ying Zhang,Lingzhi Wu,Xiaomei Lu,Lianhui Wang,Quli Fan,Wei Huang

DOI: https://doi.org/10.1039/c7ra12779k

IF: 4.036

2018-01-01

RSC Advances

Abstract:Based on the localized surface plasmon resonance (LSPR) technology, a novel plasmonic nanosensor with high sensitivity and high selectivity was prepared for the detection of trace sulfide ions on an individual Au@Ag nanoparticle. Furthermore, it could be used to monitor the sulfurization on an individual Au@Ag nanoparticle surface observed under dark-field microscopy (DFM).
A Cu@Au Nanoparticle-Based Colorimetric Competition Assay for the Detection of Sulfide Anion and Cysteine.

Jia Zhang,Xiaowen Xu,Yue Yuan,Cheng Yang,Xiurong Yang

DOI: https://doi.org/10.1021/am2007678

IF: 9.5

2011-01-01

ACS Applied Materials & Interfaces

Abstract:As an extension of our previous work, which described the unique ability of the core/shell Cu@Au nanoparticle (NP) to selectively recognize iodide, (1) herein, we wish to report the development of an alternatively sensitive and selective colorimetric detection for sulfide anion and cysteine based upon the Cu@Au NP by a competition avenue. In the absence of sulfide anion or cysteine, iodide can induce an appreciable color change of the Cu@Au NP solution from purple to red by transforming the clusters of NP to single, nearly spherical, and larger ones. However, the transformation is severely interfered by the presence of sulfide or cysteine because of a higher binding strength of the S-Au bond than the I-Au one. As a result, the clear purple-to-red color change induced by iodide is affected as a correlation with the concentration of sulfide or cysteine. By taking advantage of this fact, we can detect a concentration of 3 μM for sulfide and 0.4 μM for cysteine with the naked eye or 0.3 μM (10 ppb) for sulfide and 50 nM (6 ppb) for cysteine aided by a UV/vis spectrometer. Given the detrimental effect of hydrogen sulfide and the biological importance of cysteine, the assay may become useful in the environment monitoring, water quality inspection and biomedical diagnosis as well.
Highly Specific Colorimetric Recognition and Sensing of Sulfide with Glutathione-Modified Gold Nanoparticle Probe Based on an Anion-For-Molecule Ligand Exchange Reaction

Jia Zhang,Xiaowen Xu,Xiurong Yang

DOI: https://doi.org/10.1039/c2an16307a

2012-01-01

Abstract:Colorimetric recognition and sensing of sulfide with high selectivity by virtue of glutathione-modified gold nanoparticle (GSH-AuNP) is presented. The assay is developed based on a specific anion-for-molecule ligand exchange reaction, through which sulfide replaces glutathione self-assembled on the AuNP. The unique feature of the GSH-AuNP probe makes it a novel colorimetric sensor for sulfide.
Label-free Detection of Sulfide Ions Based on Fluorescence Quenching of Unmodified Core–shell Au@Ag Nanoclusters

Zhong-Xia Wang,Chun-Lan Zheng,Shou-Nian Ding

DOI: https://doi.org/10.1039/c3ra45019h

IF: 4.036

2014-01-01

RSC Advances

Abstract:Based on the principle of fluorescence quenching, by the interaction between S2− ions and the Ag atoms/ions on the surface of the core–shell Au@Ag NCs, we propose a simple label-free method for the detection of S2− ions with high selectivity and sensitivity by using fluorescent core–shell Au@Ag NCs in aqueous media.
Colorimetric Detection of Sulfide Anions via Redox-Modulated Surface Chemistry and Morphology of Au-Hg Nanorods

Xiaotian Zhu,Chang Liu,Jie Liu

DOI: https://doi.org/10.1155/2019/8961837

2019-05-02

International Journal of Analytical Chemistry

Abstract:A new colorimetric assay for the detection of sulfide anions with high sensitivity and selectivity is reported, utilizing Au-Hg alloy nanorods (Au-HgNRs) as probe. Au-HgNRs were prepared by modifying gold nanorods (AuNRs) with reducing agent and mercury ions. In an aqueous solution with sulfide anions, the formation of mercuric sulfide due to redox reaction between the amalgams and sulfide anions greatly changed the surface chemistry and morphology of the Au-HgNRs, leading to a red shift of the localized surface plasmon resonance (LSPR) absorption peak, accompanied by a change in colorimetric response. A good linear relationship was obtained between the LSPR peak wavelength shift and concentration of sulfide anion in the range of 1 × 10 −5 −1 × 10 −4 mol/L. The selectivity of this method has been investigated by other anions. The colorimetric sensing system successfully detected sulfide in wastewater from leather industry.

chemistry, analytical
Selective and Sensitive Colorimetric Detection of Copper Ions Based on Anti-Aggregation of the Glutathione-Induced Aggregated Gold Nanoparticles and Its Application for Determining Sulfide Anions

Qian Gao,Yin Zheng,Chi Song,Li-Qiang Lu,Xi-Ke Tian,An-Wu Xu

DOI: https://doi.org/10.1039/c3ra42909a

IF: 4.036

2013-01-01

RSC Advances

Abstract:A facile, rapid, selective and sensitive colorimetric method for the detection of copper ions (Cu2+) based on anti-aggregation of the glutathione-induced aggregated gold nanoparticles (AuNPs) was developed. Cu2+ can prevent the aggregation of AuNPs induced by glutathione (GSH) through catalyzing oxygen oxidation of GSH to oxidized glutathione (GSSG). In the presence of a specified amount of GSH, the aggregations of AuNPs decrease with increasing concentrations of Cu2+, which can be monitored by an ultraviolet-visible spectrophotometer or the naked eye. High sensitivity could be achieved for the detection of Cu2+ down to 20 nM. The method shows excellent selectivity toward Cu2+ over other metal ions, which can not prevent the GSH-induced aggregation of AuNPs even at a 20-fold molar excess. We further used the proposed method to selectively and sensitively detect sulfide anions in aqueous solution. The detection limit of sulfide anions (S2-) could reach 100 nM, which is one order of magnitude lower than that of GSH modified AuNPs-based colorimetric S2- assay.
Sensitive and Robust Colorimetric Sensing of Sulfide Anion by Plasmonic Nanosensors Based on Quick Crystal Growth

Hao Huang,Qian Li,Jiahong Wang,Zhe Li,Xue-Feng Yu,Paul K. Chu

DOI: https://doi.org/10.1007/s11468-013-9592-0

IF: 2.726

2013-01-01

Plasmonics

Abstract:A highly sensitive and selective method for colorimetric sensing of sulfide anions in aqueous solutions is illustrated. The sensing mechanism is based on quick crystallization from Ag to Ag 2 S in the presence of sulfide anions which alter the dielectric properties of the Au/Ag core/shell nanorods. The longitudinal surface plasmon resonance peak of the Au/Ag nanorods at about 686 nm undergoes a redshift and the color of the nanorod solution also changes from light green to purple. Sulfide ions at a concentration of 4.0 μM (1.3 ppb) can be detected visually and a sensitivity of 0.5 μM (167 ppt) is achieved by Vis–near-infrared spectrophotometry. Compared to other plasmonic sensors, our Au/Ag nanorod probe does not require surface modification while exhibiting high stability and robustness under different pH conditions. This simple and cost-effective sensing platform provides a rapid and convenient detection for sulfide anions at concentrations far below the hazardous limit in aqueous media.
Gold Nanoclusters As Fluorescent Sensors for Selective and Sensitive Hydrogen Sulfide Detection.

Yan Zhang,Min Li,Qinqin Niu,Pengfei Gao,Guomei Zhang,Chuan Dong,Shaomin Shuang

DOI: https://doi.org/10.1016/j.talanta.2017.04.077

2017-01-01

Abstract:As a highly toxic environmental pollutant and also an important gaso transmitter in diverse physiological processes, the selective and sensitive detection of hydrogen sulfide (H2S) is very significant. In this work, acetylcysteine stabilized gold nanoclusters (ACC@AuNCs)-based fluorescent sensors had been successfully constructed for H2S perception. The sensing principle was that H2S-induced fluorescence quenching of AuNCs which attributed to both the formation of Au2S between Au(I) in the AuNCs and H2S and the increased particle size. The proposed sensors showed high selectivity toward H2S over other anions, amino acids and thiols, and exhibited a stable response for H2S from 0.002 to 120 mu mol L-1 with a detection limit of 1.8 nmol L-1. In addition, the practical application of the designed sensors was further evaluated with water and serum samples, and the tested results agreed well with those obtained by ICP-AES method. The satisfactory recoveries and good precision show that the proposed fluorescent sensors has potential application in biological and environmental fields.
Electrochemiluminescence of A Nanoag-Carbon Nanodot Composite and Its Application to Detect Sulfide Ions

Zhong-Xia Wang,Chun-Lan Zheng,Qi-Le Li,Shou-Nian Ding

DOI: https://doi.org/10.1039/c3an02097e

2014-01-01

Abstract:This work presents the enhanced electrochemiluminescence (ECL) of a newly prepared nanosilver-carbon nanodot (Ag-C-dot) composite and its application for the sensitive detection of sulfide (S(2-)) ions. The Ag-C-dot composite was easily prepared by adding silver nitrate into C-dot colloids through an alkaline reduction. The obtained Ag-C-dots were characterized by UV-vis spectra, fluorescence spectra and transmission electron microscopy. The electrochemical and ECL behaviors of the Ag-C-dot composite were investigated by cyclic voltammetry. Moreover, a simple label-free method to detect S(2-) ions with a high selectivity and sensitivity has been developed based on the ECL of the Ag-C-dot composite in aqueous media. The sensing mechanism could be due to the strong and specific interaction between the S(2-) ions and the Ag atoms/ions on the surface of the Ag-C-dot composite, which dramatically affects the resulting ECL of the Ag-C-dot composite. The linear response to detect S(2-) ions ranges from 0.05 to 100 μM with a detection limit of 0.027 μM (~1 ppb). This work indicates that the Ag-C-dot nanocomposite possesses potential applications for environment sensing.
Highly Selective and Sensitive Detection of Hydrogen Sulfide by the Diffraction Peak of Periodic Au Nanoparticle Array with Silver Coating

Xuejiao Li,Tao Zhang,Jie Yu,Changchang Xing,Xinyang Li,Weiping Cai,Yue Li

DOI: https://doi.org/10.1021/acsami.0c12557

2020-08-20

Abstract:The two-dimensional (2D) periodic Au nanosphere array with silver coating was prepared by using a colloidal monolayer template to obtain a Au nanosphere array and subsequently depositing silver thin coating on it, which could be used as an optical sensor to effectively detect H2S. Such periodic Au nanosphere array with silver coating displayed a surface plasmonic resonance (SPR) peak and an optical diffraction peak. Compared with the SPR peak, the diffraction peak, originated from the periodic arrangements of the obtained array, demonstrated a more sensitive optical change to detect H2S with a significant redshift as the H2S concentration increased. It was attributed to the increase of the refractive index of the environment around the Au nanosphere arrays with silver coating due to the partial formation of Ag2S after detecting H2S. Furthermore, the H2S sensor based on the change of the optical diffraction peak, showed an excellent selectivity and it was very sensitive to detect H2S from 2 to 30 μM. This method was investigated by the analysis in H2S-spiked blood samples, which indicates that the method has the potential to detect H2S in blood samples. The presented work provides a new strategy of utilizing the optical diffraction peak of the periodic array to develop promising sensors.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12557?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12557</a>.Additional SEM image, extinction spectra, table of comparison, and detection of blood samples data, etc. (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12557/suppl_file/am0c12557_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Optical Properties of Ag–Au Nanoclusters for Sulphide Sensing from TDDFT Calculations

Le Chang,Zhiping Liu,Daojian Cheng

DOI: https://doi.org/10.1016/j.jallcom.2015.09.030

IF: 6.2

2015-01-01

Journal of Alloys and Compounds

Abstract:A time-dependent density functional theory (TDDFT) approach is applied to investigate the optical properties of Ag–Au nanoclusters for sulphide sensing. It is found that the difference of refractive index between the cationic Ag13S and Ag13 clusters can cause the redshifts of the vertical excitation spectrum of the cationic Ag13S cluster, which is due to that sulphide can induce new electronic states in the frontier orbitals. Compared with the pure cationic Ag13 cluster, the cationic Ag12Au cluster shows enhanced sensitivity for detecting sulphide due to the hybridization between the orbitals of Ag and Au atoms, which can promote interband transition. With increasing the coverage of sulphide, more redshifts of the vertical excitation spectrum are found for the cationic Ag12Au cluster upon the adsorption of sulphide. Moreover, the cubohedral cationic Ag12Au cluster possesses more intense optical response than the icosahedral one, which is explained by the natural transition orbital analysis. It is expected that our theoretical results can provide new guidelines to design new powerful sensor for detecting sulphide using Ag–Au nanoparticles.
Selective Colorimetric Detection of Hydrogen Sulfide Based on Primary Amine-Active Ester Crosslinking of Gold Nanoparticles.

zhengan yuan,fang lu,meihua peng,c w wang,y t tseng,yuchuan du,na cai,c w lien,h t chang,yong he,edward s yeung

DOI: https://doi.org/10.1021/acs.analchem.5b01302

IF: 7.4

2015-01-01

Analytical Chemistry

Abstract:Hydrogen sulfide (H2S) is a highly toxic environmental pollutant and also an important gaseous transmitter. Therefore, selective detection of H2S is very important, and visual detection of it with the naked eye is preferred in practical applications. In this study, thiolated azido derivates and active esters functionalized gold nanoparticles (AEpAuNPs)-based nanosensors have been successfully prepared for H2S perception. The sensing principle consists of two steps: first, H2S reduces the azide group to a primary amine; second, a cross-linking reaction between the primary amine and active ester induces the aggregation of AuNPs. The AE-AuNPs-based nanosensors show high selectivity toward H2S over other anions and thiols due to the specific azide-H2S chemistry. Under optimal conditions, 0.2 mu M H2S is detectable using a UV-vis spectrophotometer, and 4 mu M H2S can be easily detected by the naked eye. In addition, the practical application of the designed nanosensors was evaluated with lake water samples.
Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Fangdou Zhang,Yanxue Shang,Ruyue Yu,Ying Wang,Fan Feng,Qi Guo,Jinyan Xing,Zhangyu Tian,Jingbin Zeng,Zifeng Yan

DOI: https://doi.org/10.1016/j.jhazmat.2022.129144

IF: 13.6

2022-08-15

Journal of Hazardous Materials

Abstract:Colorimetric and chemoresistive gas sensing methods have aroused great interest in H2S monitoring due to their unique merits of naked-eye readout, and highly sensitive and rapid detection. However, combining these two methods for gas detection, especially utilizing one material as their common sensing material is a grand challenge because they are inconsistent in sensing mechanism. Taking advantage of the strong chemical affinity of Cu2O for H2S and the excellent performance of localized surface plasmon resonance (LSPR) of Au nanoparticles (NPs) in the visible regions and its ability as a noble metal to enhance gas sensing property, the Cu2O-Au nanochains (NCs) were prepared for dual-mode detection of H2S gas. The Cu2O-Au chemoresistive gas sensor shows a 5-fold higher response than Cu2O sensor at room temperature with a low detection limit of 10 ppb. Such good performance is attributed to the spillover effect and catalytic activity of Au NPs, and the enhanced H2S adsorption after Au loading as revealed by density functional theory calculation. Test strips containing Cu2O-Au produced for gaseous H2S detection show superior color gradient changes (blue, yellow, and brown). Finally, the practicability of the method was validated by real-time monitoring H2S released from cell culture.

environmental sciences,engineering, environmental
Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Fangdou Zhang,Yanxue Shang,Ruyue Yu,Ying Wang,Fan Feng,Qi Guo,Jinyan Xing,Zhangyu Tian,Jingbin Zeng,Zifeng Yan

DOI: https://doi.org/10.1016/j.jhazmat.2022.129144

IF: 13.6

2022-01-01

Journal of Hazardous Materials

Abstract:Colorimetric and chemoresistive gas sensing methods have aroused great interest in H2S monitoring due to their unique merits of naked-eye readout, and highly sensitive and rapid detection. However, combining these two methods for gas detection, especially utilizing one material as their common sensing material is a grand challenge because they are inconsistent in sensing mechanism. Taking advantage of the strong chemical affinity of Cu2O for H2S and the excellent performance of localized surface plasmon resonance (LSPR) of Au nanoparticles (NPs) in the visible regions and its ability as a noble metal to enhance gas sensing property, the Cu2O-Au nanochains (NCs) were prepared for dual-mode detection of H2S gas. The Cu2O-Au chemoresistive gas sensor shows a 5-fold higher response than Cu2O sensor at room temperature with a low detection limit of 10 ppb. Such good performance is attributed to the spillover effect and catalytic activity of Au NPs, and the enhanced H2S adsorption after Au loading as revealed by density functional theory calculation. Test strips containing Cu2O-Au produced for gaseous H2S detection show superior color gradient changes (blue, yellow, and brown). Finally, the practicability of the method was validated by real-time monitoring H2S released from cell culture.
Sulfite recognition and sensing using Au nanoparticles as colorimetric probe: a judicious combination between anionic binding sites and plasmonic nanoparticles

jia zhang,yue yuan,xiaolei wang,xiurong yang

DOI: https://doi.org/10.1039/c2ay25181g

IF: 3.1

2012-01-01

Analytical Methods

Abstract:A colorimetric sulfite sensor endowed with high selectivity has been developed, using melamine as the anionic binding site and gold nanoparticles as the signaling reporter.
Highly Sensitive Sulphide Mapping in Live Cells by Kinetic Spectral Analysis of Single Au-Ag Core-Shell Nanoparticles

Bin Xiong,Rui Zhou,Jinrui Hao,Yanghui Jia,Yan He,Edward S. Yeung

DOI: https://doi.org/10.1038/ncomms2722

IF: 16.6

2013-01-01

Nature Communications

Abstract:Hydrogen sulphide (H2S) is a gaseous signalling agent that has important regulatory roles in many biological systems but remains difficult to measure in living biological specimens. Here we introduce a new method for highly sensitive sulphide mapping in live cells via single-particle plasmonic spectral imaging that uses Au-Ag core-shell nanoparticles as probes. This strategy is based on Ag2S formation-induced spectral shifts of the nanoprobes, which is not only highly selective towards sulphide but also shows a linear logarithmic dependence on sulphide concentrations from 0.01 nM to 10 μM. A theoretical model was established that successfully explained the experimental observations, suggesting that the local sulphide concentration as well as its oscillations can be determined indirectly from kinetic measurements of the spectral shifts of the nanoprobes. We demonstrated for the first time the real-time mapping of local variations of sulphide levels in live cells with nM sensitivity.
Colorimetric Detection of Sulfide Ions in Water Samples Based on the in Situ Formation of Ag2S Nanoparticles

Pengjuan Ni,Yujing Sun,Haichao Dai,Jingting Hu,Shu Jiang,Yilin Wang,Zhen Li,Zhuang Li

DOI: https://doi.org/10.1016/j.snb.2015.05.066

2015-01-01

Abstract:In this work, a facile approach to sensitively detect sulfide ions is developed. The proposed method is based on the findings that silver ions could oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to induce a blue color and an absorption peak centered at 652 nm. The introduction of sulfide ions leads to the formation of Ag2S nanoparticles which act as catalyst to enhance the oxidation capacity of silver ions, resulting in a blue color burning and increase of the absorbance at 652 nm. Based on the above facts, a facile method is developed to qualitatively and quantitatively detect sulfide ions by naked eyes and UV-vis spectroscopy, respectively. The color changes of the detection system in the presence of nanomolar level of sulfide ions could be distinguished by naked-eyes, demonstrating the high sensitivity of the method. Highly sensitive detection of sulfide ions can be achieved in the range of 1.0 x 10(-9) M to 8.0 x 10(-8) M, with a detection limit of 0.2 nM. In addition, this method shows excellent selectivity toward sulfide ions detection and has been successfully applied to detect sulfide ions in tap water and lake water samples. Moreover, this method is simple without the preparation of nanomaterials and the need of complex readout instruments. (c) 2015 Elsevier B.V. All rights reserved.
A Novel Three-Dimensional Nanosensing Array for the Discrimination of Sulfur-Containing Species and Sulfur Bacteria.

Jian-Yu Yang,Ting Yang,Xiao-Yan Wang,Yi-Ting Wang,Meng-Xian Liu,Ming-Li Chen,Yong-Liang Yu,Jian-Hua Wang

DOI: https://doi.org/10.1021/acs.analchem.9b00476

IF: 7.4

2019-01-01

Analytical Chemistry

Abstract:The discrimination of various sulfur -containing species helps us to deeply understand how sulfur affects cellular signaling and other physiological events. Herein, we present a three-dimensional sensor array based on simultaneous variation of the optical properties (fluorescence, light scattering, and UV-vis absorption) of gold-silver alloy nanocluster (AuAgNCs)-gold nanoparticle (AuNPs) composite for the rapid identification of 13 sulfur-containing species and sulfur-oxidizing bacteria. The sensor array is fabricated based on the strong coordination interactions between sulfur-containing compounds and AuAgNCs on the surface of AuNPs. The sulfur species of interest exhibit different affinities toward AuAgNCs and generate unique optical properties. These response patterns could divide the analytes into three categories including organic sulfide, inorganic sulfide, and thiols. Thirteen types of sulfur species including cystine, methionine, GSSG, S2-, SO32-, S2O32-, S2O72-, S2O82-, S4O62-, GSH, N-acetyl-l-cysteine, homocysteine, and cysteine can be well distinguished by the sensor array with principal component analysis at 0.5 μM. Moreover, sulfur-oxidizing bacteria and nonsulfur bacteria can also be well discriminated at a level of OD600 = 0.005.

Highly Sensitive and Selective Colorimetric Detection of Sulphide Using Ag–Au Nanoalloys: a DFT Study

Au/AgI Dimeric Nanoparticles for Highly Selective and Sensitive Colorimetric Detection of Hydrogen Sulfide

High-throughput Sulfide Sensing with Colorimetric Analysis of Single Au-Ag Core-Shell Nanoparticles.

An Au@Ag Nanocube Based Plasmonic Nano-Sensor for Rapid Detection of Sulfide Ions with High Sensitivity.

A Cu@Au Nanoparticle-Based Colorimetric Competition Assay for the Detection of Sulfide Anion and Cysteine.

Highly Specific Colorimetric Recognition and Sensing of Sulfide with Glutathione-Modified Gold Nanoparticle Probe Based on an Anion-For-Molecule Ligand Exchange Reaction

Label-free Detection of Sulfide Ions Based on Fluorescence Quenching of Unmodified Core–shell Au@Ag Nanoclusters

Colorimetric Detection of Sulfide Anions via Redox-Modulated Surface Chemistry and Morphology of Au-Hg Nanorods

Selective and Sensitive Colorimetric Detection of Copper Ions Based on Anti-Aggregation of the Glutathione-Induced Aggregated Gold Nanoparticles and Its Application for Determining Sulfide Anions

Sensitive and Robust Colorimetric Sensing of Sulfide Anion by Plasmonic Nanosensors Based on Quick Crystal Growth

Gold Nanoclusters As Fluorescent Sensors for Selective and Sensitive Hydrogen Sulfide Detection.

Electrochemiluminescence of A Nanoag-Carbon Nanodot Composite and Its Application to Detect Sulfide Ions

Highly Selective and Sensitive Detection of Hydrogen Sulfide by the Diffraction Peak of Periodic Au Nanoparticle Array with Silver Coating

Optical Properties of Ag–Au Nanoclusters for Sulphide Sensing from TDDFT Calculations

Selective Colorimetric Detection of Hydrogen Sulfide Based on Primary Amine-Active Ester Crosslinking of Gold Nanoparticles.

Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Cu<sub>2</sub>O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Sulfite recognition and sensing using Au nanoparticles as colorimetric probe: a judicious combination between anionic binding sites and plasmonic nanoparticles

Highly Sensitive Sulphide Mapping in Live Cells by Kinetic Spectral Analysis of Single Au-Ag Core-Shell Nanoparticles

Colorimetric Detection of Sulfide Ions in Water Samples Based on the in Situ Formation of Ag2S Nanoparticles

A Novel Three-Dimensional Nanosensing Array for the Discrimination of Sulfur-Containing Species and Sulfur Bacteria.