Abstract:During the past two decades, wearable devices have been broadly used for a variety of fields such as biomedical system, communication and microelectronics. The power system such as lithium-ion batteries is essential to the operation of wearable devices, which should adapt to irregular substrates and sustain complex deformations. A promising strategy is to fabricate high-performance energy storage devices in a fiber shape, e.g., fiber lithium-ion batteries (LIBs). These fiber LIBs with diameters ranging from tens to hundreds of micrometers can be readily integrated with human body and work stably under constant body motions. They can also be woven into breathable fabrics to satisfy the needs of wearable electronics. The key challenges facing fiber LIBs include effective loading of active materials on fiber electrodes, efficient charge transfer along fiber electrodes and interface stability of fiber electrodes under operation and deformation. Fiber electrodes are thus designed with hierarchical and aligned channels to effectively load active materials, so an effective electric field can be established between the fiber cathode and anode. Aligned carbon nanotubes (CNTs) can be made with conductive additives and active materials into fiber electrodes by a continuous spinning process. Conventional metal current collectors, binders and conductive agents are not required, and active materials may reach 90% of the electrode by weight. The resulting hierarchically helical CNT fiber electrode shows high flexibility, high strength, and high electrical conductivity. The flexural rigidity is as low as 10-7 nN/m(2), which is several orders of magnitude lower than those of ordinary synthetic fibers. The specific strength reaches 107 Nm/kg, which is higher than those of ordinary synthetic fibers. The conductivity reaches 10(4) S/cm, which can meet the needs of batteries. The aligned CNT composite fiber permits efficient electron transport, where the electrons hop among neighboring CNTs. Besides, due to the capillary force, the electrolyte can penetrate throughout the entire fiber via micrometer-sized and nanometer-sized channels, benefiting ion transport. The twisted CNT bundles firmly bind active materials and prevent their significant volume variations during charge and discharge processes. Therefore, the efficient conductive pathways can be maintained to deliver both high rate and cyclic stability. Fiber LIBs could be fabricated by assembling two fiber electrodes in parallel, twisting or coaxial structure. Gel electrolyte avoids the potential safety risks stemmed from liquid electrolytes. The continuously fiber LIBs show both high flexibility and energy storage capacity. After bending for 100000 cycles, the capacities have been well maintained, and the energy densities exceed 100 Wh/kg. Based on the similar strategy, a series of fiber energy storage devices such as supercapacitors, lithium-sulfur batteries, lithium-air batteries, zinc-ion batteries, zincair batteries and aluminum-air batteries, have been also produced. To summarize, fiber energy storage devices can be woven into flexible fabrics or integrated with energy harvesting devices to satisfy the next-generation electronics. Such a new strategy establishes an efficient avenue to particularly accelerate the development of wearable electronics in the future.

Flexible and High-Voltage Coaxial-Fiber Aqueous Rechargeable Zinc-Ion Battery.

Dendrite‐Free Flexible Fiber‐Shaped Zn Battery with Long Cycle Life in Water and Air

Constructing Metal-Organic Framework-Derived Carbon Incorporated V2O5 Nanowire-Bundle Arrays on Carbon Nanotube Fiber As Advanced Cathodes for High-Performance Wearable Zinc-Ion Batteries

Constructing Carbon Nanotube Hybrid Fiber Electrodes with Unique Hierarchical Microcrack Structure for High‐Voltage, Ultrahigh‐Rate, and Ultralong‐Life Flexible Aqueous Zinc Batteries

Flexible Zinc–Air Batteries with Ampere‐Hour Capacities and Wide‐Temperature Adaptabilities

Flexible Fiber-Type Zinc–carbon Battery Based on Carbon Fiber Electrodes

A high-capacity aqueous zinc-ion battery fiber with air-recharging capability

High‐Fluidity/High‐Strength Dual‐Layer Gel Electrolytes Enable Ultra‐flexible and Dendrite‐Free Fiber‐Shaped Aqueous Zinc Metal Battery

Bioinspired Interface Design of Sewable, Weavable, and Washable Fiber Zinc Batteries for Wearable Power Textiles

Building microcracked structure fibrous cathode coated by Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) for ultra-stable fiber-shaped aqueous zinc ions batteries

Engineering integrated structure for high-performance flexible zinc-ion batteries

Flexible and Antifreezing Fiber-Shaped Solid-State Zinc-Ion Batteries with an Integrated Bonding Structure

Wet spinning of fiber-shaped flexible Zn-ion batteries toward wearable energy storage

An Ultraflexible Silicon–Oxygen Battery Fiber with High Energy Density

Research Progress of Fiber-Shaped Electrochemical Energy Storage Devices

Boosting Zn-ion storage capability of self-standing Zn-doped Co3O4 nanowire array as advanced cathodes for high-performance wearable aqueous rechargeable Co//Zn batteries

In situ crafting of a 3D N-doped carbon/defect-rich V2O5- x· n H2O nanosheet composite for high performance fibrous flexible Zn-ion batteries

An ultrathin rechargeable solid-state zinc ion fiber battery for electronic textiles

Design and Application of Fiber Batteries

Constructing Carbon Nanotube Hybrid Fiber Electrodes with Unique Hierarchical Microcrack Structure for High‐Voltage, Ultrahigh‐Rate, and Ultralong‐Life Flexible Aqueous Zinc Batteries (Small 11/2023)

High-Performance and Ultraflexible Aqueous Rechargeable Lithium-Ion Batteries Developed by Constructing All Binder-free Electrode Materials