Abstract:Due to the complex multiscale interaction between intense turbulence and relatively weak flames, turbulent premixed flames in the thin and broken reaction zones regimes exhibit strong finite-rate chemistry and strain effects and are hence challenging to model. In this work, a laboratory premixed jet flame in the broken reaction zone, which has recently been studied using direct numerical simulation (DNS), is modeled using a large eddy simulation (LES)/dynamic thickened flame (DTF) approach with detailed chemistry. The presence of substantial flame thickening due to strong turbulence-chemistry interactions, which can be characterized by a high Karlovitz number (Ka), requires the DTF model to thicken the flame in an adaptive way based on the local resolution of flame scales. Here, an appropriate flame sensor and strain-sensitive flame thickness are used to automatically determine the thickening location and thickening factor, respectively. To account for finite-rate chemistry and strain effects, the chemistry is described in two different ways: (1) detailed chemistry denoted as full transport and chemistry (FTC), and (2) tabulated chemistry based on a strained premixed flamelet (SPF) model. The performance of the augmented LES/DTF approach for modeling the high Ka premixed flame is assessed through detailed a posteriori comparisons with DNS of the same flame. It is found that the LES/DTF/FTC model is capable of reproducing most features of the high Ka turbulent premixed flame including accurate CO and NO prediction. The LES/DTF/SPF model has the potential to capture the impact of strong turbulence on the flame structure and provides reasonable prediction of pollutant emissions at a reasonable computational cost. In order to identify the impact of aerodynamic strain, the turbulent flame structure is analyzed and compared with unstrained and strained premixed flamelet solutions. The results indicate that detailed strain effects should be considered when using tabulated methods to model high Ka premixed flames.

Large Eddy Simulation of Turbulent Premixed and Stratified Combustion Using Flame Surface Density Model Coupled with Tabulation Method

Performance assessment of flamelet models in flame-resolved LES of a high Karlovitz methane/air stratified premixed jet flame

Large-Eddy Simulation of Premixed Methane/Air Jet Flames

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Large Eddy Simulation of Turbulent Premixed Swirling Flames Using Dynamic Thickened Flame with Tabulated Detailed Chemistry

Large Eddy Simulation of Turbulent Stratified Combustion Using Dynamic Thickened Flame Coupled with Tabulated Detailed Chemistry

Large Eddy Simulation of Turbulent Premixed Piloted Flame Using Artificial Thickened Flame Model Coupled with Tabulated Chemistry

Large-eddy simulation of Cambridge-Sandia stratified flames under high swirl

Large eddy simulation of strut enhanced mixing for supersonic combustion

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Flamelet LES of Turbulent Premixed/stratified Flames with H2 Addition

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

Flamelet LES of a Turbulent Pulverized Solid Fuel Flame Using a Detailed Phenomenological Soot Model

Large Eddy Simulation of Flame Structure and Combustion Mode in a Hydrogen Fueled Supersonic Combustor

Large Eddy Simulation of Soot Formation in a Turbulent Lifted Flame with a Discretized Population Balance and a Reduced Kinetic Mechanism

Flamelet LES of Swirl-Stabilized Oxy-Fuel Flames Using Directly Coupled Multi-Step Solid Fuel Kinetics

Large-eddy Simulation of the Darmstadt Multi-Regime Turbulent Flame Using Flamelet-Generated Manifolds

Large-Eddy Simulation of a Swirling Diffusion Flame Using a SOM SGS Combustion Model

Large Eddy Simulation of the Cambridge/Sandia Stratified Flame with Flamelet-Generated Manifolds: Effects of Non-Unity Lewis Numbers and Stretch

Large-eddy Simulation of Turbulent Combustion Based on Steady Flamelet/progress Variable Approach

Large-Eddy Simulation of the Sydney Swirling NonPremixed Flame and Validation of Several Subgrid-Scale Models