Abstract:_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 215952, “Enhancing Bioremediation of Petroleum-Contaminated Soil Using Rhamnolipids: A Combined Laboratory and Field Study,” by Pan Ni, Lehigh University; Yonglin Ren, SPE, Stepan Oilfield Solutions; and Derick G. Brown, Lehigh University, et al. The paper has not been peer reviewed. _ Hydrocarbon spills can occur at various stages of the oil and gas exploration and production process. Treating these spills onsite to avoid more-expensive excavation and incineration processes would be beneficial. The study outlined in the complete paper aims to optimize the use of rhamnolipid biosurfactants for enhancing the bioremediation of hydrocarbon-contaminated soil. The goal of this work was to explore the effects of rhamnolipid application on hydrocarbon degradation rate under both laboratory and field conditions and to examine the effects of this treatment on the indigenous soil microorganism population. Introduction The authors write that, to the best of their knowledge, previous research studies on rhamnolipid-based soil remediation focused on either laboratory or field tests and that comparison between laboratory-scale and field-scale tests is overlooked but necessary for practical applications. Materials and Methods Materials and Chemicals. The soil used for this work (23 kg for the laboratory test, 10 metric tons for the field test) was obtained from a contaminated site in Longford Mills, Canada. The soil properties are presented in Table 1 of the complete paper. The rhamnolipid stock solution featured 9.8 wt% rhamnolipid blends in deionized water. Another commercial remediation agent (enzyme-based) was used in the field test to compare with the performance of rhamnolipid. Ammonium chloride (NH4Cl) and potassium hydrogen phosphate (K2HPO4) also were used along with sodium hydroxide (NaOH). Experimental Setup. Both laboratory and field tests were ex-situ tests using simulated soil piles. The laboratory test was conducted for 193 days. For the laboratory experiments, an aerobic/anaerobic respirometer system equipped with a low-temperature incubator was used to monitor the in-situ oxygen uptake inside eight reactors (Fig. 1). Each reactor contained 250 g of soil with rhamnolipid doses of 0, 0.1, 0.5, and 1 g/kg. The temperature was set to 25°C. Inside each reactor was placed 10 mL of 4-M NaOH in a 20-mL glass beaker to adsorb the produced CO2. A parallel set of eight reactors was prepared and operated under the same conditions. The nutrients of nitrogen and phosphorous (NH4Cl and K2HPO4) were added at specific times based on the oxygen uptake rate monitored by the respirometer. To avoid the possible inhibition of the microbes in the soil as a result of high ionic strength (greater than 160 mM) in the soil pore water, NH4Cl and K2HPO4 were added so that the molar concentration in the soil pore water did not exceed 100 mM. The field test is being conducted in Longford Mills, Ontario, Canada, and is ongoing at the time of writing. For the field test, 10 metric tons of soil were mixed to achieve homogeneity before the preparation of the soil piles. Five different treatment conditions were examined using duplicate soil piles (10 piles total), with each consisting of 1 metric ton of soil. Nutrient addition was similar to that used in the laboratory tests. Temperature and moisture were monitored every few days at five points in each soil pile, and the pH was monitored once every month at five points.

Effect of Rhamnolipids on Enhanced Anaerobic Degradation of Petroleum Hydrocarbons in Nitrate and Sulfate Sediments.

Effect of Rhamnolip on Microbial Degradation of Petroleum Hydrocarbon

Synergistic Effect of Rhamnolipids and Inoculation on the Bioremediation of Petroleum-Contaminated Soils by Bacterial Consortia

Rhamnolipids enhance crude oil bioremediation in simulated marine oil spill system

The Effect of Rhamnolipid Production on Crude Oil Biodegradation

Enhancement of Rhamnolipid Biosurfactant for Biodegradation of Petroleum Hydrocarbons in Water

Rhamnolipids enhance marine oil spill bioremediation in laboratory system

Rhamnolipid production by Pseudomonas aeruginosa ZJU under high salinity condition

BIODEGRADATION OF OILY WASTEWATER PROMOTED BY RHAMNOLIPID

Shift of Soil Polycyclic Aromatic Hydrocarbons (PAHs) Dissipation Pattern and Microbial Community Composition due to Rhamnolipid Supplementation

Rhamnolipids Enhance Bioremediation of Petroleum-Contaminated Soil

Biodegradation of Crude Oil Bypseudomonas Aeruginosa in the Presence of Rhamnolipids

[Effects of Rhamnolipid on the Biodegradation of N-Hexadecane by Microorganism and the Cell Surface Hydrophobicity].

Effect of Adding Rhamnolipid Biosurfactant and Inoculating Rhamnolipid-producing Strain on Oil Biodegradation

Effects of rhamnolipid on the pyrene-degrading ability and cell surface properties of Pseudomonas sp. GP3A

Production of Rhamnolipids with Different Proportions of Mono-Rhamnolipids Using Crude Glycerol and a Comparison of Their Application Potential for Oil Recovery from Oily Sludge.

Insights into the Effect of Rhamnolipids on the Anaerobic Fermentation and Microalgae Lipid Production of Waste Activated Sludge: Performance and Mechanisms

Effect of Rhamnolipid Biosurfactant on Solubilization and Biodegradation of Polycyclic Aromatic Hydrocarbons

Effect of Rhamnolipids on Degradation of Anthracene by Two Newly Isolated Strains, Sphingomonas Sp. 12A and Pseudomonas Sp. 12B.

Effects of Nutrition Optimization Strategy on Rhamnolipid Production in A Pseudomonas Aeruginosa Strain Dn1 for Bioremediation of Crude Oil

Performance Evaluation of Rhamnolipids Addition for the Biodegradation and Bioutilization of Petroleum Pollutants During the Composting of Organic Wastes with Waste Heavy Oil.