Abstract:The use of poly(vinylidene fluoride) (PVDF) microfiltration (MF) membranes to purify oily water has received much attention. However, it is challenging to obtain high-performance PVDF microfiltration membranes due to severe surface fouling and rapid decline of permeability. This study explored a new approach to fabricate high-performance PVDF/silica (SiO2) composite membrane via the use of a polymer solution featuring lower critical solution temperature (LCST) characteristics and the non-solvent thermally induced phase separation method (NTIPS). Coupling with morphological observations, the membrane formation kinetics were analyzed in depth to understand the synergistic effect between the LCST solution properties and fabrication conditions in NTIPS. Utilizing such a synergistic effect, the transition from finger-like macrovoid pores to bi-continuous highly connected pores could be flexibly tuned by increasing the PVDF concentration and the weight ratio of SiO2/PVDF in the dope solution and by raising the coagulation temperature to above the LCST of the solution. The filtration experiments with surfactant-stabilized oil-water emulsion showed that the permeation flux of the PVDF/SiO2 composite membranes was higher than 318 L·m−2·h−1·bar−1 and the rejection above 99.2%. It was also shown that the PVDF/SiO2 composite membranes, especially those fabricated above the LCST, demonstrated better hydrophilicity, which resulted in significant enhancement in the anti-fouling properties for oil/water emulsion separation. Compared to the benchmark pure PVDF membrane in oily water purification, the optimal composite membrane T70 was demonstrated via the 3-cycle filtration experiments with a significantly improved flux recovery ratio (Frr) and minimal reduced irreversible fouling (Rir). Overall, with the developed method in this work, facile procedure to tune the membrane morphology and pore structure was demonstrated, resulting in high performance composite membranes suitable for oil/water emulsion separation.

Fabrication of Cu(OH) 2 Nanowires Blended Poly(vinylidene Fluoride) Ultrafiltration Membranes for Oil-Water Separation

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Superhydrophilic PVDF nanofibrous membranes with hierarchical structure based on solution blow spinning for oil-water separation

Enhanced separation properties of polyvinylidene membranes with MnO 2 nanowire addition

Electrospun Polyacrylonitrile-Fluorinated Polyurethane/Polysulfone Nanofiber Membranes for Oil–Water Separation

Copper Nanoparticles Modified Superhydrophobic Electrospun Carbon Nanofiber Membranes with Enhanced the Oil–water Separation Performance

Enhanced Oil-Water Separation via Superhydrophobic Electrospun Carbon Fiber Membrane Decorated with Ni Nanoclusters

Nature-inspired construction of poly (vinylidene fluoride) membranes through the coordination coating of tannic acid with copper ions for oil-in-water emulsions separation

Facile preparation of PVDF-HFP/GE tubular nanofiber membranes with 3D surface structure for high efficient continuous oil/water emulsion separation

Ultrahigh-flux (>190,000 L·m-2h-1) separation of oil and water by a robust and durable Cu(OH)2 nanoneedles mesh with inverse wettability

Design of a novel PVDF-HFP/GE tubular nanofiber membranes for ultrafast and continuous oil/water separation

Micro-dissolved fabrication of robust superhydrophilic and underwater superoleophobic membranes based on cotton fabrics for oil/water separation

Preparation of an electrospun tubular PU/GE nanofiber membrane for high flux oil/water separation

Highly hydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes via postfabrication grafting of surface-tailored silica nanoparticles.

High-flux oil–water separation with superhydrophilicity and underwater superoleophobicity ZIF-67@Cu(OH)2 nanowire membrane

Cu-TCPP Nanosheets Blended Polysulfone Ultrafiltration Membranes with Enhanced Antifouling and Photo-Tunable Porosity

Fabrication of a superhydrophilic PVDF membrane with excellent chemical and mechanical stability for highly efficient emulsion separation

Preparation of superhydrophilic-underwater superoleophobic silica nanorods modified fiber membrane for efficient oil-in-water emulsion separation

Superhydrophilic In-Situ-Cross-Linked Zwitterionic Polyelectrolyte/Pvdf-Blend Membrane for Highly Efficient Oil/Water Emulsion Separation

A Facile Method to Control Pore Structure of PVDF/SiO2 Composite Membranes for Efficient Oil/Water Purification

Superwettable nanofibrous membrane with wrinkled rough structure for efficient water-in-oil separation