Abstract:The reactivity of isobutane dehydrogenation over a series of non-ordered mesoporous chromia/alumina (Cr2O3/Al2O3) catalysts with large specific surface area (149.4–381.6m2g−1) and high pore volume (0.77–1.24cm3g−1), synthesized using a metal-organic framework MIL-101 as a molecular host and chromium precursor, aluminium isopropoxide (Al(i-OC3H7)3) as the aluminium precursor, were studied in detail. The chromium species were highly dispersed over the catalyst with chromia loading up to 10wt.%. The specific surface area of the catalyst decreased, whereas the amount of surface Cr3+ species and the mole ratio of Cr3+ and Cr6+ species (Cr3+/Cr6+) increased with the increasing chromia loadings (5–25wt.%) and calcination temperature (500–900°C), respectively. The addition of potassium to the catalyst system greatly promoted isobutene selectivity and catalyst stability. The catalyst with 1.5wt.% K2O and 10wt.% Cr2O3 loadings calcined at 800°C was found to exhibit the highest isobutane conversion 60.1% with the isobutene selectivity up to 93.2% among all the catalysts. The maintainable catalytic reactivity demonstrated the high stability of the catalyst in ten dehydrogenation-regeneration cycles. Moreover, it was proposed that the Cr3+ species was mainly the active site and catalytic selectivity was depended on the surface Cr3+/Cr6+ value over the catalyst. The catalyst presented much more stable dehydrogenation activity compared with the conventional catalyst. Consequently, this study presents a feasible way to facile synthesis of the mesoporous MOF-derived Cr2O3/Al2O3 catalysts with high stability and good catalytic reactivity over isobutane dehydrogenation.

Oxidative Dehydrogenation of 1-Butene to 1,3-Butadiene Using CO2 over Cr-SiO2 Catalysts Prepared by Sol-gel Method

A One-Step Method for Preparing Cr-doped SiO2: an Efficient Catalyst for the Direct Oxidation of Cyclohexane to Ketone-Alcohol Oil

Chromium Oxide Supported on Silicalite-1 Zeolite As a Novel Efficient Catalyst for Dehydrogenation of Isobutane Assisted by CO2

CO2 oxidative dehydrogenation of n-butane to butadiene over CrOx supported on CeZr solid solution

Preparation of Highly Active Cr2O3-SiO2 Catalyst by Sol-Gel Method for Ethylbenzene Dehydrogenation in the Presence of CO2

Chromium Oxide Supported on Mesoporous SBA-15 As Catalysts for Oxidative Dehydrogenation of Propane by CO2

Dehydrogenation of Isobutane to Isobutene with Carbon Dioxide over SBA‐15‐Supported Chromia‐Ceria Catalysts

Engineering multi-component 3DOM FeVCrOx catalysts with high oxygen mobility for the oxidative dehydrogenation of 1-butene with CO2

Dehydrogenation of Propane over Crox/Sio2 Catalysts under Co2 Atmosphere

Oxidative Dehydrogenation of Ethane with Co2 over Cr Supported on Submicron Zsm-5 Zeolite

Chromium Oxide Supported on Mesoporous SBA-15 as Propane Dehydrogenation and Oxidative Dehydrogenation Catalysts

Oxidative Dehydrogenation and Dry Reforming of N-Butane with CO2 over NiFe Bimetallic Catalysts

Ce-doped mesoporous alumina supported Fe-based catalyst with high activity for oxidative dehydrogenation of 1-butene using CO2 as soft oxidant

Modification of Cr/SiO<sub>2</sub> for the dehydrogenation of propane to propylene in carbon dioxide

Modification of Cr/SiO 2 for the Dehydrogenation of Propane to Propylene in Carbon Dioxide

Isobutane Dehydrogenation over the Mesoporous Cr2O3/Al2O3 Catalysts Synthesized from a Metal-Organic Framework MIL-101

ZnO Supported on Silicalite-1 As an Efficient Catalyst for Isobutane Dehydrogenation to Isobutene Assisted by CO2

Oxidative Dehydrogenation Of Propane To Propylene With Co2 Over Cr/Nazsm-5 Catalysts

Highly dispersed atomic layer deposited CrOx on SiO2 catalyst with enhanced yield of propylene for CO2 –mediated oxidative dehydrogenation of propane

Dehydrogenation of Ethylbenzene over Cr-Ce-O Mixed Oxides in the Presence of CO_2

Well-dispersed monolayer CrO x /Silicalite-1 catalysts for efficient propane dehydrogenation