Investigation of Phosphate Adsorption from an Aqueous Solution Using Spent Fluid Catalytic Cracking Catalyst Containing Lanthanum

Zhen Li,Zhaofu Qiu,Ji Yang,Benteng Ma,Shuguang Lu,Chuanhui Qin
DOI: https://doi.org/10.1007/s11783-018-1082-3
IF: 6.048
2018-01-01
Frontiers of Environmental Science & Engineering
Abstract:Spent FCC catalyst with lanthanum is proposed as a novel P-removal adsorbent. The spent FCC catalyst exhibits 99% adsorption efficiency for low P-concentration wastewater (C0 <5.0 mg/L). High affinity, endothermic reaction and fast sorption kinetics are achieved. The phosphate is adsorbed in the form of LaPO4 and KH2PO4. A spent fluid catalytic cracking (FCC) catalyst containing lanthanum (La) was used as a novel adsorbent for phosphorus (P) in simulated wastewater. The experiments were conducted in a batch system to optimize the operation variables, including pH, calcination temperature, shaking time, solid-liquid ratio, and reaction temperature under three initial P-concentrations (C0 = 0.5, 1.0, and 5.0 mg/L). Orthogonal analysis was used to determine that the initial P-concentration was the most important parameter for P removal. The P-removal rate exceeded 99% and the spent FCC catalyst was more suitable for use in low P-concentration wastewater (C0 <5.0 mg/L). Isotherms, thermodynamics and dynamics of adsorption are used to analyze the mechanism of phosphorus removal. The results show that the adsorption is an endothermic reaction with high affinity and poor reversibility, which indicates a low risk of second releasing of phosphate. Moreover, chemical and physical adsorption coexist in this adsorption process with LaPO4 and KH2PO4 formed on the spent FCC catalyst as the adsorption product. These results demonstrate that the spent FCC catalyst containing La is a potential adsorbent for P-removal from wastewater, which allows recycling of the spent FCC catalyst to improve the quality of water body.
What problem does this paper attempt to address?