Abstract:The influence of mold temperature and filling velocity on the formation and distribution of the mesophase in ultrasonic micro-injection-molded isotactic polypropylene (iPP) was explored using a wide-angle X-ray diffraction (WAXD) technique. A Gaussian fitting method was used to decompose one-dimensional WAXD profiles into quantitative fractions of the crystalline lamellae, mesophase, and amorphous phase. It was found that the mesophase formation can only be detected up to a mold temperature of 60 °C due to its low thermal stability. Moreover, the content of the mesophase decreases distinctly as the filling velocity is increased. The component is mainly located in the core layer after examining the distribution of each crystal form along the thickness direction, irrespective of mold temperature and filling velocity. All these findings can be attributed to the correlation between the degree of molecular orientation and the cooling rate. A high cooling rate occurred during the micro-injection molding process produces the result that there is less time for the polymeric chains with a low level of orientation to crystallize into a well-ordered structure, thus yielding many mesophase crystals with a paracrystalline smectic arrangement especially in the core layer. Finally, a diagram for mesophase formation was constructed in mold temperature–filling velocity space, which offers a detailed road map for regulating mesophase fraction in ultrasonic micro-injection molding operations.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.1c00077?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.1c00077</a>.Output power profiles taken from five ultrasonic micro-injection molding events, distribution of energy provided by ultrasonic vibration, change of the orientational order parameters of the (040)<sub>α</sub> reflection, and diagram for the degree of orientation of molecular chains in the crystallites (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.1c00077/suppl_file/ma1c00077_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nondestructive and Quantitative Characterization of Bulk Injection-Molded Polylactide Using SAXS Microtomography

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Effect of Micro-Mold Cavity Dimension on Structure and Property of Polylactic Acid/Polycaprolactone Blend under Microinjection Molding Conditions

High-Throughput in Situ Characterization of Polymer Crystallization under an Intense Flow, High Pressure, and Cooling Gradient during Injection Molding

Effect of Micro-Mold Cavity Dimension on Structure Andproperty of Polylactic Acid/Polycaprolactone Blend Undermicroinjection Molding Conditions

Development of High Temperature Resistant Stereocomplex PLA for Injection Moulding

Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure Through Γ-Radiation-induced Chemical Reactions

Influence of moulding processing on poly (lactic acid) (PLA) semi-crystalline properties

Filling Behavior, Morphology Evolution and Crystallization Behavior of Microinjection Molded Poly(lactic Acid)/hydroxyapatite Nanocomposites

Influence of Structure Gradients in Injection Moldings of Isotactic Polypropylene on Their Mechanical Properties

Influence of Processing Parameters on Mechanical Properties and Degree of Crystallization of Polylactide

Vibration-assisted injection molding: an efficient process for enhanced crystallinity development and mechanical characteristics for poly lactic acid

Crystallinity and Property Enhancements in Neat Polylactic Acid by Chilled Extrusion: Solid‐State Shear Pulverization and Solid‐State/Melt Extrusion

Low-temperature sintering of stereocomplex-type polylactide nascent powder: The role of poly(methyl methacrylate) in tailoring the interfacial crystallization between powder particles

Non‐destructive Characterisation of Polymers During Injection Moulding with Ultrasonic Attenuation Measurement

Multiscale Structural Evolutions and Deformation Mechanisms of Stereocomplexed and Homocrystalline Poly(lactic acid)s during Stretching: Correlating Thermomechanical Properties with Polymorphic Structures

Formation and Distribution of the Mesophase in Ultrasonic Micro-Injection-Molded Isotactic Polypropylene

In situ X-ray diffraction and thermal simulation of material extrusion additive manufacturing of polymer

A Quantitative Study on Branching Density Dependent Behavior of Polylactide Melt Strength

Shear-Induced Nucleation and Morphological Evolution for Bimodal Long Chain Branched Polylactide

Study on the influence of in-mold sequential injection molding process parameters on mechanical properties of self-reinforced single composites