Abstract:Conformal optical domes are characterized as having external more elongated optical surfaces that are optimized to minimize drag, increased missile velocity and extended operational range. The outer surface of the conformal domes typically deviate greatly from spherical surface descriptions, so the inherent asymmetry of conformal surfaces leads to variations in the aberration content presented to the optical sensor as it is gimbaled across the field of regard, which degrades the sensor's ability to properly image targets of interest and then undermine the overall system performance. Consequently, the aerodynamic advantages of conformal domes cannot be realized in practical systems unless the dynamic aberration correction techniques are developed to restore adequate optical imaging capabilities. Up to now, many optical correction solutions have been researched in conformal optical design, including static aberrations corrections and dynamic aberrations corrections. There are three parts in this paper. Firstly, the combination of static and dynamic aberration correction is introduced. A system for correcting optical aberration created by a conformal dome has an outer surface and an inner surface. The optimization of the inner surface is regard as the static aberration correction; moreover, a deformable mirror is placed at the position of the secondary mirror in the two-mirror all reflective imaging system, which is the dynamic aberration correction. Secondly, the using of appropriate surface types is very important in conformal dome design. Better performing optical systems can result from surface types with adequate degrees of freedom to describe the proper corrector shape. Two surface types and the methods of using them are described, including Zernike polynomial surfaces used in correct elements and user-defined surfaces used in deformable mirror (DM). Finally, the Adaptive optics (AO) correction is presented. In order to correct the dynamical residual aberration in conformal optical design, the SPGD optimization algorithm is operated at each zoom position to calculate the optimized surface shape of the MEMS DM. The communication between MATLAB and Code V established via ActiveX technique is applied in simulation analysis.

Theoretical Research on the Novel Adaptive Optics Configuration Based on the Tubular Deformable Mirror for the Aberration Correction of the Annular Laser Beam

Numerical Analysis of a Novel Two-Stage Enlargement and Adaptive Correction Approach for the Annular Aberration Compensation

Development of A Novel Three-Dimensional Deformable Mirror with Removable Influence Functions for High Precision Wavefront Correction in Adaptive Optics System

Aberration corrections of doughnut beam by adaptive optics in the turbid medium.

Method for Annular Aberration Correction of Large-Aperture Thin-Wall Tube Lasers

A Way for Measuring the Relationship Between DM Surface and Wave-Front Aberrations in a Beam Rotate-90° Laser System

Closed-Loop Experiment Of Two Deformable Mirrors Adaptive Optics System Compensating For Amplitude And Phase Fluctuations

Novel Unimorph Deformable Mirror for Ocular Adaptive Optics

Location-grouping Algorithm Based on Limited Actuators Deformable Mirror for High Precision Wavefront Aberration Correction in Adaptive Optics System

Novel Method of Improving Beam Quality of Thin-Wall Tube Laser Based on Right-Angle Cone Deformable Mirror

Close-loop Performance of a High Precision Deflectometry Controlled Deformable Mirror (DCDM) Unit for Wavefront Correction in Adaptive Optics System

Structure and Closed-Loop Control of A Novel Compact Deformable Mirror for Wavefront Correction in A High Power Laser System

Study of Deformable Mirror for Compensating the Thermally Induced Aberration of Laser Diode-Pumped Solid-State Laser

Double Drive Modes Unimorph Deformable Mirror For Femtosecond Laser Beam Wavefront Correction

Optimum Matching of Wave-Front Sensor and Wave-Front Corrector for Annular Laser Beam

Intra-Cavity Adaptive Correction of a Unidirectional Nd:YAG Slab Unstable Travelling-Wave Resonator

A self-correction method for deformable mirror with thermal deformation

Experiment of full field compensation with two-deformable mirrors adaptive optics system

Deformable mirror resolution-matching-based two-stage wavefront sensorless adaptive optics method

The Research of Conformal Optical Design

Correcting Dynamic Residual Aberrations of Conformal Optical Systems Using AO Technology