Abstract:In this paper, we proposed a general direct design method for three-dimensional freeform surfaces and freeform imaging systems based on a construction-iteration process. In the preliminary surfaces-construction process, the coordinates as well as the surface normals of the data points on the multiple freeform surfaces can be calculated directly considering the rays of multiple fields and different pupil coordinates. Then, an iterative process is employed to significantly improve the image quality or achieve a better mapping relationship of the light rays. Three iteration types which are normal iteration, negative feedback and successive approximation are given. The proposed construction-iteration method is applied in the design of an easy aligned, low F-number off-axis three-mirror system. The primary and tertiary mirrors can be fabricated on a single substrate and form a single element in the final system. The secondary mirror is simply a plane mirror. With this configuration, the alignment difficulty of a freeform system can be greatly reduced. After the preliminary surfaces-construction stage, the freeform surfaces in the optical system can be generated directly from an initial planar system. Then, with the iterative process, the average RMS spot diameter decreased by 75.4% compared with the system before iterations, and the maximum absolute distortion decreased by 94.2%. After further optimization with optical design software, good image quality which is closed to diffraction-limited is achieved. (C) 2015 Optical Society of America

Iterative wavefront tailoring to simplify freeform optical design for prescribed irradiance.

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Precise light control in highly tilted geometry by freeform illumination optics

Design of Freeform Illumination Optics

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Designing Double Freeform Optical Surfaces for Controlling Both Irradiance and Wavefront.

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Design Beam Shapers with Double Freeform Surfaces to Form a Desired Wavefront with Prescribed Illumination Pattern by Solving a Monge-Ampère Type Equation

Freeform Surface Lens Design for Uniform Illumination

Feedback Modification Strategy for Designing a Free-Form Optical Surface with Given Illumination Pattern

Freeform lens for off-axis illumination in optical lithography system

Differentiable Design of Double-Freeform Lens with Multi-Level Radial Basis Functions for Extended Source Irradiance Tailoring

B-spline freeform surface tailoring for prescribed irradiance based on differentiable ray-tracing

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System

Design of High-Compactness Freeform Optical Surfaces Via Energy Accumulating Optimization

Automated design of freeform imaging systems

Ray Targeting for Optimizing Smooth Freeform Surfaces for Led Non-Rotational Illumination

Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space