Abstract:Stretchable conductors have attracted tremendous attention owing to their potential applications as electrodes and sensing elements for wearable electronic devices. In this study, we have developed an inkjet printing process to directly embed and align silver nanowires in the polydimethylsiloxane elastomer for stretchable conductors. Instead of printing on top of elastomers, we printed the silver nanowires directly into an uncured liquid elastomer layer to embed the conductive nanowires, therefore eliminating the problems with surface wetting and delamination in conventional approaches, where the conductor is patterned on top of elastomers. This study investigated the process controls to tune the embedment depth and alignment of silver nanowires through inkjet printing. The printing process was captured with a high-speed camera to elucidate the mechanisms that direct the printed features. By controlling the thickness of the liquid elastomer layer and the post-printing treatment of printed lines, stretchable conductors composed of embedded silver nanowires have been fabricated in a single step. Because of the reflow of the viscous liquid elastomer, the printed silver nanowires are aligned along the printing direction, resulting in linewidth of tens of micrometers upon solvent removal. The stretchable conductors showed good mechanical and electrical stability under repeated bending and stretching/releasing cycles. This method of directly embedding silver nanowires into a liquid elastomer offers facile heterogeneous integration for digital patterning of stretchable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00616?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00616</a>.Morphology of the as-synthesized AgNWs; finite element simulation of droplet impact; embedment of an ethanol droplet dispensed with a pipette; image sequence of jetting an ethanol droplet onto a thick liquid PDMS layer; image sequence of printing AgNW lines with nine passes; optical images of the printed AgNW lines with various printing passes; SEM image of the cross-section of the embedded AgNW lines; FIB-SEM image of the cross-section of the embedded AgNW lines; SEM images of the AgNW lines after cyclohexane soaking; resistance change of the embedded AgNW lines for extended stretching/releasing cycles; and discussion on the conductivity and stretchability of the printed AgNW lines (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00616/suppl_file/el0c00616_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Direct Embedment and Alignment of Silver Nanowires by Inkjet Printing for Stretchable Conductors

Advanced Printing Transfer of Assembled Silver Nanowire Network into Elastomer for Constructing Stretchable Conductors

High-Resolution Rapid Prototyping of Liquid Metal Electronics by Direct Writing on Highly Prestretched Substrates

A Water‐Based Silver‐Nanowire Screen‐Print Ink for the Fabrication of Stretchable Conductors and Wearable Thin‐Film Transistors

Photocurable Stretchable Conductors with Low Dynamic Resistance Variation

Inkjet Printing of Flexible Transparent Conductive Films with Silver Nanowires Ink

Over-Stretching Tolerant Conductors on Rubber Films by Inkjet-Printing Silver Nanoparticles for Wearables

Electrohydrodynamic Printing of High‐Resolution Self‐Reduced Soldered Silver Nanowire Pattern for Wearable Flexible Strain Sensors

Stretchable and Lithography-Compatible Interconnects Enabled by Self-Assembled Nanofilms with Interlocking Interfaces

Capillary Force-Induced Printing of Stretchable and Mechanically Stable Silver Nanowire Electrodes With Highly Ordered Alignment For Ultra-Flexible Organic Light-Emitting Devices

Ag Nanowire-Based Stretchable Electrodes and Wearable Sensor Arrays

A Simple Strategy towards Highly Conductive Silver‐Nanowire Inks for Screen‐Printed Flexible Transparent Conductive Films and Wearable Energy‐Storage Devices

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications

Gravure Printing of Water-based Silver Nanowire ink on Plastic Substrate for Flexible Electronics

A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics

Silver Nanowires Deposited on Triblock Copolymer Microfibers for Stretchable Conductive Fabrics

Novel Insights into Inkjet Printed Silver Nanowires Flexible Transparent Conductive Films

EGaIn‐Assisted Room‐Temperature Sintering of Silver Nanoparticles for Stretchable, Inkjet‐Printed, Thin‐Film Electronics

High-Resolution and Large-Area Patterning of Highly Conductive Silver Nanowire Electrodes by Reverse Offset Printing and Intense Pulsed Light Irradiation

A simple and efficient transfer method for fabricating stretchable AgNW patterns on PDMS using carboxylated cellulose nanofibers as a sacrificial layer

Self‐Healing, Robust, and Stretchable Electrode by Direct Printing on Dynamic Polyurea Surface at Slightly Elevated Temperature