Abstract:This article reports a slow-wave structure (SWS) working at 1 THz which can be fabricated through nano-computer numerical control (nano-CNC) technology for the first time. First, a 1 THz deformed quasi sine waveguide (D-QSWG) SWS has been designed and simulated in this article. To reduce the metal loss of input and output waveguide, a coupler which transit the waveguide to over mode rectangular waveguide has been designed. The simulation result shows that input and output waveguides with this coupler have lower metal loss than that of WR1 rectangular waveguide. To fabricate the designed D-QSWG SWS, tungsten steel endmills have been used. The fabricated SWS has the surface roughness around 58–74 nm, the corresponding effective conductivity is around $2\times 10^{{7}}$ –1.85 $\times 10^{{7}}$ S/m. And the cold test results show that the insertion loss of the fabricated model is less than 30 dB while the reflection loss is less than −15 dB in the frequency range of 0.998–1.016 THz, which has a good consistency with the simulated results. The beam-wave interaction simulation results based on the cold test results show that the designed D-QSWG traveling wave tube (TWT) has the output power of 300 mW, and the 3 dB bandwidth is around 3 GHz.

Experimental Verification of the Low Transmission Loss of a Flat-Roofed Sine Waveguide Slow-Wave Structure

Investigation of a Modified Flat-Roofed Sine Waveguide Slow-Wave Structure for Wideband 220-GHz TWT

Design and Cold Test of Flat-Roofed Sine Waveguide Circuit for W-Band Traveling-Wave Tube

Study on 1-Thz Sine Waveguide Traveling-Wave Tube

Design and Cold-Test of 0.34-THz Modified Slotted Sine Waveguide Traveling Wave Tube

Study on a Novel Dual-Beam Flat-Roofed Sine Waveguide Traveling-Wave Tube

A New Type of 0.34thz Sine Waveguide Slow Wave Structure

Design and Experiment of 1 THz Slow Wave Structure Fabricated by Nano-CNC Technology

Design of a Quasi Flat-Roofed Sine Waveguide Slow-wave Structure for 220ghz TWT

A Novel Rectangular Groove Sine Waveguide TWT Operating at 0.34 THz

Two-Stage 0.34 THz Sine Waveguide Slow Wave Structure

Design of a W-band Traveling-Wave Tube Based on Sine Waveguide Slow-Wave Structure with Sheet Electron Beam

Flatted Grating Folded Waveguide Slow Wave Structure for 0.2 THz Traveling Wave Tube

Novel Low-Loss 0.65-Thz Multisectional Folded Waveguide High-Frequency Circuit

Investigation of Sine Groove Waveguide Slow Wave Structure for Terahertz Traveling Wave Tube

A Novel Low Loss Sawtooth Slow Wave Structure for 0.66-THz Traveling Wave Tubes

Slow-Wave Substrate Integrated Waveguide with Low Loss and Miniaturized Dimensions Using TGV Technology

Investigation of a novel folded waveguide slow wave structure for traveling wave tube

Investigation of Low Voltage Angular Log-periodic Folded Groove Waveguide Slow Wave Structure for G-band TWT

Study on Sine Waveguide Slow Wave Structure

Design and Analysis of a 0.33-THz Sine-Shaped Folded Waveguide Traveling Wave Tube