Abstract:The application of NMR spin—lattice relaxation measurements of water contained in porous solids is investigated as a possible tool for the determination of pore size distributions. NMR methods have several potential advantages over conventional porosimetry/adsorption techniques including the study of wet porous solids, a wide range of sample sizes that may be studied, and the fact that no pore shape assumption is required. In principle, water contained in a pore will relax faster than bulk water. This decrease in the observed relaxation rate decay constant, T1, is directly related to the pore volume to surface area ratio (i.e., hydraulic radius) according to the “two-fraction, fast-exchange model.” However, the suitability of this model and NMR spin—lattice relaxation measurements for the determination of pore size distributions has not been previously demonstrated. Pore size distributions have been determined for two series of porous solids by mercury porosimetry and a NMR method. A series of four controlled-pore glasses with very narrow pore size distributions and a mean radius in the range 3.4 to 17.6 nm were studied at a frequency of 20 MHz and at four temperatures. By using four samples with similar surface chemistry/ pore shape, the validity of the two-fraction, fast-exchange model was assessed. Experiments were conducted using a 180°–τ-90° pulse sequence and the distribution of T1 was calculated using a nonnegative leastsquares routine (NNLS) presented in a previous paper. The two-fraction model described the change of mean T1 with pore radius at a given temperature. The change of the surface relaxation decay constant, T1s, fit an Arrhenius expression with an activation energy of 1.8 kcal/mole. Agreement between the mercury porosimetry and NMR derived pore size distributions is excellent. T1 measurements at both 20 and 300 MHz and 303 K were also made on a series of porous solids fabricated by pelleting submicron silica spheres. These solids exhibit afairly wide pore size distribution (⋍ one order of magnitude). The two-fraction, fast-exchange model satisfactorily described the relationship between pore size and T1. Agreement between mercury porosimetry and NMR pore size distributions is good. However, the NMR derived distributions consisted of a series of narrow peaks overlapping the single broad porosimetry peak. The surface relaxation effect, and, hence, the overall pore size sensitivity, is increased by a factor of 3 when the proton frequency is decreased from 300 to 20 MHz.

NMR Characterization of Pore Structure and Connectivity for Nano-self-assembly γ-Al 2 O 3 and Precursor

Formation Mechanism of NSA of Secondly Nano Self-Assembly Macropore Alumina Penetrable Pore

Shale Pore Characterization Using Nmr Cryoporometry with Octamethylcyclotetrasiloxane As the Probe Liquid

Characterizing the Behavior of Water Interacting With a Nano‐Pore Material: A Structural Investigation in Native Environment Using Magnetic Resonance Approaches

Pore Structure Characterization of Shales Using Synchrotron SAXS and NMR Cryoporometry

Study of Pore Structure of Gas Shale with Low-Field NMR: Examples from the Longmaxi Formation, Southern Sichuan Basin, China

Petrophysical Characterization of Oil-Bearing Shales by Low-Field Nuclear Magnetic Resonance (NMR)

Advances in low-field nuclear magnetic resonance (NMR) technologies applied for characterization of pore space inside rocks: a critical review

Multivariate Machine Learning Models of Nanoscale Porosity from Ultrafast NMR Relaxometry

Joint Analysis of Pores in Low, Intermediate, and High Rank Coals Using Mercury Intrusion, Nitrogen Adsorption, and Nuclear Magnetic Resonance

A NMR technique for the analysis of pore structure: Application to materials with well-defined pore structure

Investigating the behaviour of NaCl brines and hydrocarbons in porous alumina using low-field NMR relaxation and diffusion methods

Application of Low-Field Nuclear Magnetic Resonance (LFNMR) in Characterizing Coal Pores and Permeability

Quantifying Nano-Pore Heterogeneity and Anisotropy in Gas Shale by Synchrotron Radiation Nano-Ct

Structure and Pore Size Distribution in Nanoporous Carbon

Comparison of Low-Field NMR and Microfocus X-ray Computed Tomography in Fractal Characterization of Pores in Artificial Cores

Characterization of the Pore Structure and Fluid Movability of Coal-Measure Sedimentary Rocks by Nuclear Magnetic Resonance (NMR)

A robust NMR method to measure porosity of low porosity rocks

The use of AFM in quantitative analysis of pore characteristics in coal and coal-bearing shale

Pore Structure Quantification and Fractal Characterization of MSA Mortar Based on 1H Low-Field NMR

Probing Interactions of Γ‐alumina with Water Via Multinuclear Solid‐State NMR Spectroscopy