Abstract:CaCO 3 /CaO thermochemical energy storage (TCES) system has a high heat storage density (1780 kJ/kg) along with high heat storage and release temperature (650–850 °C), which can be applied to concentrated solar power (CSP) technology utilizing CO 2 Brayton cycles to improve power generation efficiency. There are several problems to be urgently resolved in current CaCO 3 /CaO solar calciners, such as poor heat and mass transfer and low thermochemical efficiency. This paper proposed a prototype CaCO 3 /CaO TCES system based on a novel fluidized bed solar reactor, which has a serrated arc surface in alignment with the direction of the incident solar rays to receive concentrated solar energy. The natural limestone particles were used as the reactive particles. The effects of operating modes (intermittent/continuous), initial mass of reactive particles, and initial carbonation temperature Tcar,initial on the heat storage and release characteristics of the TCES system were experimentally explored. During the carbonation reaction stage, the effective carbonation degrees in the continuous mode were generally higher than in the intermittent mode under the experimental conditions and declined at a slower rate. The reactive particles were recovered from the reactor for microstructural characterization after completing the experiments, high-temperature particle agglomeration and pore structure clogging were directly responsible for the decrease of the effective carbonation degree. In the continuous mode, the average thermochemical and total thermal efficiencies of 24.7 % and 53.5 % were obtained in the 1st calcination reaction, respectively, which represents significant advantages over other CaCO 3 /CaO solar calciners. The novel fluidized bed reactor demonstrated excellent fluidization in the experiments and did not exhibit mechanical deformation after multiple experiments under non-uniform concentrated radiation provided by an 84 kW e high-flux solar simulator. Overall, this paper provides a successful gas-solid reactor design to be coupled with CSP technology.

Radiative Heat Transfer and Thermal Characteristics of Fe-based Oxides Coated SiC and Alumina RPC Structures As Integrated Solar Thermochemical Reactor

Application of CoFe2O4-NiO nanoparticle-coated foam-structured material in a high-flux solar thermochemical reactor

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Effects of foam structure on thermochemical characteristics of porous-filled solar reactor

Combined Heat and Mass Transfer Analysis of Solar Reactor Integrating Porous Reacting Media for Water and Carbon Dioxide Splitting

Thermochemical CO2 reduction over NiFe2O4@alumina filled reactor heated by high-flux solar simulator

Thermal Performance Evaluation of a Novel Solar-Driven Pyrolysis Reactor

Application of CoFe 2 O 4 -Nio Nanoparticle-Coated Foam-Structured Material in a High-Flux Solar Thermochemical Reactor

Pore-scale evaluation on a volumetric solar receiver with different optical property control strategies

Experimental Characterization of Al2O3 Foam Based on High Temperature Thermal Response Experiments

Thermal-chemical Reaction Characteristics of Ni/Al2O3 Catalytic Porous Material Filled Solar Reactor for Dry Reforming of Methane Process

Investigations of Thermal Conductivity and Radiation Properties of Al2o3 Foam Materials Based on High Temperature Thermal Response Experiments

Thermal Performance Analysis on a Volumetric Solar Receiver with Double-Layer Ceramic Foam

The microstructures and properties of Fe2O3 and TiO2 co-doped corundum ceramics for solar thermal absorbing materials

Heat Transfer and Fluid Flow Analysis of Porous Medium Solar Thermochemical Reactor with Quartz Glass Cover

Copper ferrite and cobalt oxide two-layer coated macroporous SiC substrate for efficient CO2-splitting and thermochemical energy conversion

Heat storage and release characteristics of a prototype CaCO 3 /CaO thermochemical energy storage system based on a novel fluidized bed solar reactor

A High Thermal Stability Core–shell Aerogel Structure for High-Temperature Solar Thermal Conversion

Tomography-based Radiative Transfer Analysis of an Open-Cell Foam Made of Semitransparent Alumina Ceramics

Thermal Performance Analysis of Porous Foam-Assisted Flat-Plate Solar Collectors with Nanofluids

Thermochemical energy storage analysis of solar driven carbon dioxide reforming of methane in SiC-foam cavity reactor