Abstract:Conventionally, there are two basic configurations for microbial fuel cell (MFC), one with anode and cathode chambers, as known as dual-chamber MFC, one with only anode chamber and a air–cathode, called single-chamber MFC. However, electrode materials' complex configuration and high resistance limit their practical applications in power generation and wastewater purification. To this end, we constructed three MFCs using carbon felt, Ni/Ti, and Ag-Ni/Ti as anodes based on our previously constructed integrated chamber-free MFC (iMFC). After 21 days of operation, the Ag-Ni/Ti-MFC performed best in bioelectricity output and removal of target pollutants. The bioelectricity output parameters were an open-circuit voltage of 0.773 V, a maximum current density of 552.1429 mA/m 2 , and a power density of 426.8064 mW/m 2 . Furthermore, the MFC achieved removals of 67.90% for the chemical oxygen demand (COD), 55.20% for total nitrogen (TN), and 61.83% for ammonia nitrogen (NH 3 -N). Introducing silver nanoparticles to the transmembrane and outer membrane boosted the charge extraction efficiency in the MFCs. Moreover, 16S rDNA analysis indicated that typical electricity-producing bacteria, including Comamonas , Paraclostridium , and Asaccharospora, had a higher relative abundance in the Ag-Ni/Ti-MFC anode than in other anodes. Overall, the surface structure of different anode materials plays a critical role in bioelectricity generation and wastewater purification using iMFC by affecting the mass transfer of substrates and metabolites.

Micro-aeration in Anode Chamber Promotes P-Nitrophenol Degradation and Electricity Generation in Microbial Fuel Cell.

Simultaneous Processes of Electricity Generation and P-Nitrophenol Degradation in a Microbial Fuel Cell

Substrates and Pathway of Electricity Generation in a Nitrification-Based Microbial Fuel Cell.

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

An Integrated Aerobic-Anaerobic Strategy for Performance Enhancement of Pseudomonas Aeruginosa-Inoculated Microbial Fuel Cell.

Kinetics of substrate degradation and electricity generation in anodic denitrification microbial fuel cell (AD-MFC).

Simultaneous Anaerobic Ammonium Oxidation and Electricity Generation in Microbial Fuel Cell: Performance and Electrochemical Characteristics

Simultaneous Anaerobic Sulfide and Nitrate Removal in Microbial Fuel Cell

Coupling process and mechanism of methanol oxidation and nitrate reduction in an anodic denitrification microbial fuel cell (AD-MFC)

Utilization of single-chamber microbial fuel cells as renewable power sources for electrochemical degradation of nitrogen-containing organic compounds

Phenol-degrading Anode Biofilm with High Coulombic Efficiency in Graphite Electrodes Microbial Fuel Cell.

Degradation of Phenolic Compounds with Simultaneous Bioelectricity Generation in Microbial Fuel Cells: Influence of the Dynamic Shift in Anode Microbial Community.

Assessment of biomass material as valuable electrode for high energy performance in microbial fuel cell with biodegradation of organic pollutant

Effect of nitrate concentration on power generation and nitrogen removal in microbial fuel cell

Stressful encounters with social work clients: a descriptive account based on critical incidents.

Synchronously degradation of biogas slurry and triphenyltin chloride in microbial fuel cell

Electricity Generation by Degradation of Wastewater Containing Typical Phenolic Using a Microbial Fuel Cell

Synergistic degradation of o-chlorophenol in aerobic microbial fuel cells with a coupled photocatalytic-bioelectrochemical anode

Nitric oxide reduction by microbial fuel cell with carbon based gas diffusion cathode for power generation and gas purification

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

Efficient enriching high-performance denitrifiers using bio-cathode of microbial fuel cells