Abstract:Since the energy demand increases, the sources of fluid energy such as wind energy and marine energy have attracted widespread attention, especially vortex-induced vibrations excited by wind energy. It is well known that the lock-in effect in vortex-induced vibration can be applied to the piezoelectric energy harvester. Although numerous researches have been conducted on piezoelectric energy harvesting devices in recent years, a common problem of low bandwidth and harvesting efficiency still exists. In order to increase the response amplitude and decrease the threshold wind speed of vortex-induced vibration, a bionic attachment structure is proposed based on the experimental method. In the present work, twelve models are designed according to the size of pits and hemispheric protrusions which are added to the surface of a flexible smooth cylinder. Compared with the smooth cylinder which is taken as a carrier, the harvester with the bionic structure shows stronger energy capture performance on the whole. As the threshold speed decelerates from 1.8m/s to 1 m/s, the bandwidth, on the contrary, increases from 39.3% to 51.4%. Particularly, for the 10 mm pits structure with 5 columns, its peak voltage can reach 47 V, and its peak power can reach 1.21 mW with a resistance of 800 kΩ, 0.57 mW higher than that of the smooth cylinder. Comparatively speaking, the hemispherical projections structure figures with a much more different energy capturing characteristic. Starting from the column, the measured voltage of the hemispherical bionic harvester is much smaller than that of the smooth cylinder, with a peak voltage less than 15 V and a reducing bandwidth. However, compared with the smooth cylinder, hemispheric projections with 3 columns have a better energy capture effect with a measured voltage of 35V, a resistance of 800kΩ, and a wind speed of 3.097 m/s. Besides, its output power also enhances from 0.48 to 0.56 mW.

A New Piezoelectric Bimorph Energy Harvester Based on the Vortex-Induced-Vibration Applied in Rotational Machinery

Efficiently Harvesting Low-Speed Wind Energy by a Novel Bi-Stable Piezoelectric Energy Harvester from Vortex-Induced Vibration and Galloping

A Broadband Zigzag-Shaped Energy Harvester for Both Wind Energy and Vibration Energy: Modeling and Experimental Verification

Micro Windmill Piezoelectric Energy Harvester Based on Vortex- Induced Vibration in Tunnel

Harvesting Low-Speed Wind Energy by Bistable Snap-Through and Amplified Inertial Force

Rotational piezoelectric wind energy harvesting using impact-induced resonance

A hybrid piezo-dielectric wind energy harvester for high-performance vortex-induced vibration energy harvesting

An Asymmetric Bending-Torsional Piezoelectric Energy Harvester at Low Wind Speed

Performance Analysis of Wind-Induced Piezoelectric Vibration Bimorph Cantilever for Rotating Machinery

Harvesting Both Wind Energy and Vibration Energy by a Zigzag Structure with Hybrid Magnetic and Piezoelectric Effects

Design, Modeling, and Experiments of the Vortex-Induced Vibration Piezoelectric Energy Harvester with Bionic Attachments

A Piezoelectric Energy Harvester with Vortex Induced Vibration

A Bell-Inspired Piezoelectric Kinetic Energy Harvester

Piezoelectric Energy Harvesting from Vortex-Induced Vibration Using a Modified Circular Cylinder

Modeling and Analysis of Upright Piezoelectric Energy Harvester under Aerodynamic Vortex-induced Vibration

A Piezoelectric Energy Harvester with Inner Beam Adapting to Low and High Wind Speeds: Modeling, Simulation and Experiment

Nonlinear Dynamical and Harvesting Characteristics of Bistable Energy Harvester under Hybrid Base Vibration and Galloping.

A Piezoelectric Energy Harvester with Bending–Torsion Vibration in Low-Speed Water

A Piezoelectric Energy Harvester Based on Flow-Induced Flexural Vibration of A Circular Cylinder

Piezoelectric Wind Energy Harvesting from Self-Excited Vibration of Square Cylinder.

Two-Degree-of-Freedom Piezoelectric Energy Harvesting from Vortex-Induced Vibration