Abstract:Dual-energy computed tomography (CT) techniques have been used to decompose materials and characterize tissues according to their physical and chemical compositions. However, these techniques are hampered by the limitations of conventional x-ray detectors operated in charge integrating mode. Energy-resolved photon-counting detectors provide spectral information from polychromatic x-rays using multiple energy thresholds. These detectors allow simultaneous acquisition of data in different energy ranges without spectral overlap, resulting in more efficient material decomposition and quantification for dual-energy CT. In this study, a pre-reconstruction dual-energy CT technique based on volume conservation was proposed for three-material decomposition. The technique was combined with iterative reconstruction algorithms by using a ray-driven projector in order to improve the quality of decomposition images and reduce radiation dose. A spectral CT system equipped with a CZT-based photon-counting detector was used to implement the proposed dual-energy CT technique. We obtained dual-energy images of calibration and three-material phantoms consisting of low atomic number materials from the optimal energy bins determined by Monte Carlo simulations. The material decomposition process was accomplished by both the proposed and post-reconstruction dual-energy CT techniques. Linear regression and normalized root-mean-square error (NRMSE) analyses were performed to evaluate the quantitative accuracy of decomposition images. The calibration accuracy of the proposed dual-energy CT technique was higher than that of the post-reconstruction dual-energy CT technique, with fitted slopes of 0.97-1.01 and NRMSEs of 0.20-4.50% for all basis materials. In the three-material phantom study, the proposed dual-energy CT technique decreased the NRMSEs of measured volume fractions by factors of 0.17-0.28 compared to the post-reconstruction dual-energy CT technique. It was concluded that the proposed dual-energy CT technique can potentially be used to decompose mixtures into basis materials and characterize tissues according to their composition.

Dynamic-dual-energy spectral CT for improving multi-material decomposition in image-domain.

A Post-Processed Multi-Material Decomposition Method Based on Dynamic Dual-energy Detectors

An Iterative Dynamic Dual-Energy CT Model for Multi-Energy CT Imaging

Quantitative material decomposition using spectral computed tomography with an energy-resolved photon-counting detector

Image Domain Multi-Material Decomposition Using Single Energy CT.

A general adaptive decomposition method for multi-energy spectral CT

Accurate Multi-Material Decomposition in Dual-Energy CT: A Phantom Study

Reconstruction and Multi-Material Decomposition of Spectral Ct in Dynamic-Threshold-Based Counting and Integrating Modes

Iterative Dynamic Dual-Energy CT Algorithm in Reducing Statistical Noise in Multi-Energy CT Imaging.

Multi-Material Decomposition for Single Energy CT Using Material Sparsity Constraint

Hybrid Decomposition Method for Dual Energy CT

Material decomposition for dual-energy propagation-based phase-contrast CT

Image-domain multi-material decomposition for dual-energy CT based on correlation and sparsity of material images

Image-domain Material Decomposition Based on Spectra Recovery in Spectral CT with Photon-counting Detectors

Dual-energy head cone-beam CT using a dual-layer flat-panel detector: physics-based material decomposition

Multi-Material Decomposition Using Spectral Diffusion Posterior Sampling

Iterative dual energy material decomposition from spatial mismatched raw data sets

Material decomposition from photon-counting CT using a convolutional neural network and energy-integrating CT training labels

Dynamic Material Decomposition Method for MeV Dual-Energy X-ray CT

Material decomposition using dual-energy CT with unsupervised learning

A Multi-Energy Material Decomposition Method for Spectral CT Using Neural Network