Abstract:Field test results show that about 15% to 40% of building heat loss in China is attributable to poor heating systems regulation. The current method for addressing this problem is to install thermostatic radiator valves (TRVs) to the ends of radiators, a method adapted from northern Europe. However, this method has resulted in poor performance from delayed controlling action due to thermal inertia as well as insufficient system control accuracy. This is further compounded by incorrect operation by system users and a lack of financial incentives to regulate the system if users are not billed for their heat consumption. We present a new method for simultaneously heat controlling and metering. The core challenge is to design a control strategy that will maintain the room’s temperature. Thus, we established dynamic heat transfer models for water flow, the radiator and the building so as to obtain the optimal heating strategy. We also simulated the indoor thermal dynamic performance of the heating system with different heating loads, supply water temperatures, and supply water flow rates using three methods: a continuously changing flow rate (Method 1), a step-change flow rate based on temperature deviation (Method 2) and an intelligent step-change flow rate (Method 3) which predicts the duty cycle of the valve in the proceeding period and controls the valve’s on-time. The simulation results indicate the performance of these three methods. For Method 1, as the room temperature is above the set point, the flow rate can be automatically reduced to a level which is proportional to the room temperature deviation. Further, the scale factor of the flow rate is designed according to the +2°C deviation, so it is accepted that the room temperature is higher than the set point by +2°C using this method. However, this low control precision is unsatisfactory. The mean temperature is higher than the set point and greatly affected by the heating load and supply water’s temperature and flow rate. For Method 2, the controlling action is delayed by thermal inertia, the room temperature fluctuates between the highest and lowest levels, and the temperature deviation can be greater than the set value. For Method 3, both the simulation and field test results showed that room temperature deviation was maintained within a ±0.5°C range under the various conditions. This method appears relatively robust and adaptable, and was the best control strategy of the three methods.

Regression Model of Wet-Bulb Temperature in an HVAC System

Simplified heat exchange model of fan coil in wet cooling conditions

Model-based Fault Detection and Diagnosis for HVAC.

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Dynamic Modeling of Integrated Energy Cooling and Heating Supply System Based on System Identification

Performance optimization of HVAC systems with computational intelligence algorithms

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

Modeling validation and control analysis for controlled temperature and humidity of air conditioning system

Heating Control Strategy Based on Dynamic Programming for Building Energy Saving and Emission Reduction

Steady-State Performance Prediction for a Variable Speed Direct Expansion Air Conditioning System Using a White-Box Based Modeling Approach

Method of determining acceptable air temperature thresholds in Chinese HVAC buildings based on a data-driven model

Simplified Thermal Model and Optimal Control for Chilled Water Pipe in Air-Conditioning System

Modelling Variable Refrigerant Flow System for Control Purpose

Simplifying Manufacturers' Data in Unitary Hvac Equipment Through A Dx Cooling Coil Modeling

A LPV Model-Based Chilled Water Temperature Controller for HVAC Systems

A Bi-Level Optimization for an HVAC System

Development and validation of a second-order thermal network model for residential buildings

Application of energy combined thermal comfort in intelligent building management in complex environments

A novel on-off TRV adjustment model and simulation of its thermal dynamic performance

A Decentralized Method for Energy Conservation of an HVAC System

Application of machine learning and its improvement technology in modeling of total energy consumption of air conditioning water system