Tracking Sodium Migration in TiS2 Using in Situ TEM.

Bo Han,Shulin Chen,Jian Zou,Ruiwen Shao,Zhipeng Dou,Chen Yang,Xiumei Ma,Jing Lu,Kaihui Liu,Dapeng Yu,Liping Wang,Haicheng Wang,Peng Gao

DOI: https://doi.org/10.1039/c9nr00483a

IF: 6.7

2019-01-01

Nanoscale

Abstract:Usingin situTEM, the structural evolution and migration dynamics are revealed during sodium migration in TiS2.

What problem does this paper attempt to address?

Modulation of electronic state in copper-intercalated 1T-TaS 2

Wenhao Zhang,Degong Ding,Jingjing Gao,Kunliang Bu,Zongxiu Wu,Li Wang,Fangsen Li,Wei Wang,Xuan Luo,Wenjian Lu,Chuanhong Jin,Yuping Sun,Yi Yin

DOI: https://doi.org/10.1007/s12274-021-4034-3

IF: 9.9

2022-01-01

Nano Research

Abstract:Intercalation is an effective method to modify physical properties and induce novel electronic states of transition metal dichalcogenide (TMD) materials. However, it is difficult to reveal the microscopic electronic state evolution in the intercalated TMDs. Here we successfully synthesize the copper-intercalated 1T-TaS 2 and characterize the structural and electronic modification combining resistivity measurements, atomic-resolution scanning transmission electron microscopy (ADF-STEM), and scanning tunneling microscopy (STM). The intercalated Cu atom is determined to be directly below the Ta atom and suppresses the commensurate charge density wave (CCDW) phase. Two specific electronic modulations are discovered in the near-commensurate (NC) CDW phase: the electron doping state near the defective star of Davids (SDs) in metallic domains and the spatial evolution of the Mott gap in insulating domains. Both modulations reveal that intercalated Cu atoms act as a medium to enhance the interaction between intralayer SDs, in addition to the general charge transfer effect. It also solidifies the Mott foundation of the insulating gap in pristine samples. The intriguing electronic evolution in Cu-intercalated 1T-TaS 2 will motivate further exploration of novel electronic states in the intercalated TMD materials.
Pressure-modulated Lattice Structural Evolution in TiS2.

Dengman Feng,Jian Zhu,Liang Li,Yalan Yan,Linlin Liu,Litong Huang,Shufan Jia,Chenxiao Zhao,Jiacheng Zhang,Xinyang Li,Qiang Zhou,Fangfei Li

DOI: https://doi.org/10.1039/d3cp03247g

IF: 3.3

2023-01-01

Physical Chemistry Chemical Physics

Abstract:Titanium disulfide (TiS2) has drawn considerable attention in materials, physics, and chemistry thanks to its potential applications in batteries, supercapatteries and thermoelectric devices.
In situ imaging the dynamics of sodium metal deposition and stripping

Lin Geng,Chao Zhao,Jitong Yan,Chengrui Fu,Xuedong Zhang,Jingming Yao,Haiming Sun,Yong Su,Qiunan Liu,Liqiang Zhang,Yongfu Tang,Feng Ding,Jianyu Huang

DOI: https://doi.org/10.1039/d2ta02513b

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:In situ TEM is used to observe the dynamics of Na deposition and stripping in Na metal anode-based batteries, and the effects of Na and Li mass fluxes on this process are compared by density functional theory (DFT) calculations.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Tracking The Effect Of Sodium Insertion/Extraction In Amorphous And Anatase Tio2 Nanotubes

Jun Li,Jian Liu,Qian Sun,Mohammad Norouzi Banis,Xueliang Sun,Tsun-Kong Sham

DOI: https://doi.org/10.1021/acs.jpcc.7b01106

2017-01-01

Abstract:We report a mechanistic investigation of the electrochemical behavior of TiO2 nanotubes (NTs) in amorphous and anatase phases during sodiation/desodiation. The local structure variations of these two host structures upon Na+ uptake/release are comparatively examined by X-ray absorption near edge structure (XANES) at the Ti K and L, O K, and Na K edges. Upon Na insertion/extraction, the surface/near surface XANES analysis at the Ti K edge suggests that the surface/near surface of TiO2 NTs in both phases is partially reduced to metallic Ti from the unstable sodium titanate formed at the electrolyte/electrode interface, and the sodiation of amorphous NTs is more effective than anatase ones. More importantly, it further reveals that irreversible phase transformations from pure amorphous and anatase TiO2 to amorphous sodium titanate take place on the NT surface/near surface after the first cycle of discharge/charge. The bulk XANES analysis at the Ti L edge demonstrates that irreversible phase transformation also proceeds in the bulk of these two phase structures, where, however, the formation stable amorphous sodium titanate is observed. All the findings are corroborated by energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), and XANES analysis at the O K and Na K edges.
Tracking the Effect of Sodium Insertion/Extraction in Amorphous and Anatase TiO<sub>2</sub> Nanotubes

Jun Li,Jian Liu,Qian Sun,Mohammad Norouzi Banis,Xueliang Sun,Tsun‐Kong Sham

DOI: https://doi.org/10.1021/acs.jpcc.7b01106

2017-01-01

Abstract:We report a mechanistic investigation of the electrochemical behavior of TiO2 nanotubes (NTs) in amorphous and anatase phases during sodiation/desodiation. The local structure variations of these two host structures upon Na+ uptake/release are comparatively examined by X-ray absorption near edge structure (XANES) at the Ti K and L, O K, and Na K edges. Upon Na+ insertion/extraction, the surface/near surface XANES analysis at the Ti K edge suggests that the surface/near surface of TiO2 NTs in both phases is partially reduced to metallic Ti from the unstable sodium titanate formed at the electrolyte/electrode interface, and the sodiation of amorphous NTs is more effective than anatase ones. More importantly, it further reveals that irreversible phase transformations from pure amorphous and anatase TiO2 to amorphous sodium titanate take place on the NT surface/near surface after the first cycle of discharge/charge. The bulk XANES analysis at the Ti L edge demonstrates that irreversible phase transformation also proceeds in the bulk of these two phase structures, where, however, the formation stable amorphous sodium titanate is observed. All the findings are corroborated by energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), and XANES analysis at the O K and Na K edges.
Lattice Distortion and Charge Density Wave in Na2Ti2Sb2O Revealed by Scanning Tunnelling Microscopy

M. Q. Ren,Y. J. Yan,J. Jiang,S. Y. Tan,J. Miao,C. Chen,Y. Song,C. L. Zhang,P. C. Dai,B. P. Xie,T. Zhang,D. L. Feng

DOI: https://doi.org/10.1080/14786435.2016.1269217

2017-01-01

Abstract:Na2Ti2Sb2O is a parent compound of the titanium-based oxypnictide superconductors. It possesses a phase transition at T-s = 115 K whose nature is still unclear. Here we report a scanning tunnelling microscopy/spectroscopy (STM/STS) study on a Na2Ti2Sb2O single crystal. We observe a lattice distortion on the Na-terminated surface below T-s, which displays a 2 x 2 modulation (superstructure). The modulation vectors q = (+/- 0.5, 0) 2 pi/a and (0, +/- 0.5) 2 pi/a match well with the Fermi surface nesting vectors observed by angle resolved photoemission spectroscopy (ARPES), and also agree with recent X-ray diffraction. A partially opened gap-like feature is present in STS near E-F. This evidences that the lattice distortion is driven by commensurate charge density wave order. Our results suggest the electron-phonon interaction is strong in Na2Ti2Sb2O and could be responsible for the superconductivity in titanium-based oxypnictides.
In situ TEM observing structural transitions of MoS2 upon sodium insertion and extraction

Liqiang Zhang,Yushu Tang,Yuecun Wang,Yongli Duan,Degang Xie,Chunyang Wu,Lishan Cui,Yongfeng Li,Xiaohui Ning,Zhi-Wei Shan

DOI: https://doi.org/10.1039/c6ra18188k

IF: 4.036

2016-01-01

RSC Advances

Abstract:In this study, the sodiation and desodiation processes of MoS2 were characterized by using an in situ TEM technique. The structural evolution of MoS2 and its performance in a coin-type cell are recognized. Our findings provide a fundamental understanding of the reaction mechanism of MoS2 as anode for Na ion batteries.
In-situ Investigation of Pressure Effect on Structural Evolution and Conductivity of Na3SbS4 Superionic Conductor

Hui Wang,Ming Yu,Yan Wang,Zhenxing Feng,Yingqi Wang,Xujie Lu,Jinlong Zhu,Yang Ren,Chengdu Liang

DOI: https://doi.org/10.1016/j.jpowsour.2018.05.037

IF: 9.2

2018-01-01

Journal of Power Sources

Abstract:Sulfide-based conductors are one class of the most promising solid electrolytes for next-generation of all-solid-state batteries due to their advantages on high ionic conductivity and favorable mechanical properties of easy densification. Besides new material chemistry to be explored, understanding the pressure effect on structure and property is equally important from both fundamental and practical considerations, as pressure is one way to tune the properties of such solid electrolytes. Here we report the pressure-driven structural evolution and conductivity change of Na3SbS4 solid electrolyte through the integration of molecular dynamics (MD) simulation and in-situ experiments. Theoretical calculation predicts that no phase transition happens to tetragonal Na3SbS4 under 10 GPa isotopically pressure. Synchrotron X-ray diffraction and Raman results confirm that Na3SbS4 keeps stable tetragonal structure but shows anisotropic compressibility along different directions. After pressure release, the ionic conductivity of Na3SbS4 increases by four folds to 1.6 mS cm(-1), which is resulted from the dramatic decrease of grain boundary resistance.
Defects Controlled Doping and Electrical Transport in TiS2 Single Crystals

Ke Chen,Meng Song,Yi-Yang Sun,Hai Xu,Dong-Chen Qi,Zhenhuang Su,Xingyu Gao,Qian Xu,Jun Hu,Junfa Zhu,Ranran Zhang,Jie Wang,Lei Zhang,Liang Cao,Yuyan Han,Yimin Xiong

DOI: https://doi.org/10.1063/5.0005170

IF: 4

2020-01-01

Applied Physics Letters

Abstract:TiS2 has been intensively studied as an electrode material and a thermoelectric material for energy storage and conversion applications due to its high electrical conductivity. Understanding the influence of defects on electrical transport is of importance not only to resolve the long-standing question concerning the nature of TiS2, but also for the rational design of TiS2 based devices for energy scavenging applications. In this study, we integrate photoemission spectroscopy, Raman spectroscopy, and electrical transport measurements to determine the chemical compositions dominated by defects and their influence on the doping and electrical properties. Our results demonstrate that TiS2 is a heavily self-doped semiconductor with the Fermi level close to the conduction band, which serves as the conclusive experimental evidence regarding the semiconducting nature of TiS2. The doping effect is sensitive to the (subtle) changes in the chemical composition. The electron donation from the Ti interstitials (Tii) to the TiS2 host explains the high carrier concentration. The Ti Frenkel pair (TiF) acting as the acceptor is responsible for the decrease in the electron carrier concentration and electrical conductivity. High conductivity maintains upon partial oxidization, indicating the oxidization-tolerance in terms of the electronic structure. Our results provide valuable insight into the evolution of electronic properties modulated by defects that reveal unambiguously the self-doped semiconducting nature of TiS2 and chemical- and environment-tolerance of TiS2 as an advanced energy scavenging material.
In-situ TEM Investigation of MoS2 Upon Alkali Metal Intercalation

Qianming Huang,Lifen Wang,Zhi Xu,Wenlong Wang,Xuedong Bai

DOI: https://doi.org/10.1007/s11426-017-9128-0

2017-01-01

Science China Chemistry

Abstract:Phase transition in two dimensional molybdenum disulfide (MoS2) can be induced by several methods and has been investigated for decades.Alkali metal insertion of MoS2 had been proved an effective method to cause phase transition early in 1970s,and has been gaining renewed interest recently,due to the possible application of MoS2 in energy storage.The alkali metal intercalation of MoS2 has been studied by various techniques,among which in-situ transmission electron microscopy (TEM) provides unique capability of real time resolving the structural evolution of the materials at high spatial resolutions.Here by in-situ TEM technique we investigated the structural evolution of MoS2 upon lithium and sodium intercalation,along with transformation of the nanosheet and variation of the electron diffraction patterns.The intercalation process is accompanied by emergence of superstructures,which exist in several forms.The ion intercalation results in phase transition of MoS2 from 2H to 1T,and the driving mechanism of the phase transition are discussed.The work provides a more comprehensive understanding of ion intercalation induced phase transition of MoS2.
In situ TEM Observation of Resistance Switching in Titanate Based Device

Yang Yang,Weiming Lü,Yuan Yao,Jirong Sun,Changzhi Gu,Lin Gu,Yanguo Wang,Xiaofeng Duan,Richeng Yu

DOI: https://doi.org/10.1038/srep03890

IF: 4.6

2014-01-01

Scientific Reports

Abstract:After decades of efforts, the research on resistance switching (RS) behavior in transition metal oxides has shifted to the stage of verifying the proposed models by direct experimental evidences. In this paper, RS behavior and oxygen content variation of La 0.85 Sr 0.15 TiO 3 /SrTiO 3 :Nb (LSTO/STON) were investigated by in situ transmission electron microscopy observation and in situ electron energy loss spectrum characterization under external electric field. The oxygen content fluctuation adjusted by applied bias has been investigated and the observed results imply the conductive channels should be formed by the oxygen vacancy at the Pt/LSTO interface. Moreover, in situ TEM characterization displays the advantage - to reveal the origin of various RS behaviors.
In Situ Observation Of Divergent Phase Transformations In Individual Sulfide Nanocrystals

Matthew T. Mcdowell,Zhenda Lu,Kristie J. Koski,Jung Ho Yu,Guangyuan Zheng,Yi Cui

DOI: https://doi.org/10.1021/nl504436m

IF: 10.8

2015-01-01

Nano Letters

Abstract:Inorganic nanocrystals have attracted widespread attention both for their size-dependent properties and for their potential use as building blocks in an array of applications. A complete understanding of chemical transformations in nanocrystals is important for controlling structure, composition, and electronic properties. Here, we utilize in situ high-resolution transmission electron microscopy to study structural and morphological transformations in individual sulfide nanocrystals (copper sulfide, iron sulfide, and cobalt sulfide) as they react with lithium. The experiments reveal the influence of structure and composition on the transformation pathway (conversion versus displacement reactions), and they provide a high-resolution view of the unique displacement reaction mechanism in copper sulfide in which copper metal is extruded from the crystal. The structural similarity between the initial and final phases, as well as the mobility of ions within the crystal, are seen to exert a controlling influence on the reaction pathway.
Tracking the Chemical and Structural Evolution of the TiS2 Electrode in the Lithium-Ion Cell Using Operando X-ray Absorption Spectroscopy

Liang Zhang,Dan Sun,Jun Kang,Hsiao-Tsu Wang,Shan-Hsien Hsieh,Way-Faung Pong,Hans A. Bechtel,Jun Feng,Wang,Elton J. Cairns,Jinghua Guo

DOI: https://doi.org/10.1021/acs.nanolett.8b01680

IF: 10.8

2018-01-01

Nano Letters

Abstract:As the lightest and cheapest transition metal dichalcogenide, TiS2 possesses great potential as an electrode material for lithium batteries due to the advantages of high energy density storage capability, fast ion diffusion rate, and low volume expansion. Despite the extensive investigation of its electrochemical properties, the fundamental discharge-charge reaction mechanism of the TiS2 electrode is still elusive. Here, by a combination of ex situ and operando X-ray absorption spectroscopy with density functional theory calculations, we have clearly elucidated the evolution of the structural and chemical properties of TiS2 during the discharge-charge processes. The lithium intercalation reaction is highly reversible and both Ti and sulfur are involved in the redox reaction during the discharge and charge processes. In contrast, the conversion reaction of TiS2 is partially reversible in the first cycle. However, Ti-O related compounds are developed during electrochemical cycling over extended cycles, which results in the decrease of the conversion reaction reversibility and the rapid capacity fading. In addition, the solid electrolyte interphase formed on the electrode surface is found to be highly dynamic in the initial cycles and then gradually becomes more stable upon further cycling. Such understanding is important for the future design and optimization of TiS2 based electrodes for lithium batteries.
In situ atomic-scale observation of reversible sodium ions migration in layered metal dichalcogenide SnS2 nanostructures

Peng Gao,Yu-Yang Zhang,Liping Wang,Shulin Chen,Yuan Huang,Xiumei Ma,Kaihui Liu,Dapeng Yu

DOI: https://doi.org/10.1016/j.nanoen.2016.12.051

IF: 17.6

2017-01-01

Nano Energy

Abstract:Ion migration in solids provides basis for a wide range of technique applications including alkali-metal ion batteries. Understanding the ion migration dynamics and kinetics is critical to bring benefits to the industry. Here, we directly track the Na ions insertion and extraction in van der Waals interactions dominated layered structure SnS2 at atomic-scale by in situ transmission electron microscopy technique. Insertion of sodium in SnS2 forms highly defective and expanded NaxSnS2 with volume expansion of (~5%) via a two-phase reaction while sodium extraction involves a solid solution behavior with formation of nano-sized intermediate superstructure Na0.5SnS2, of which the atomic structure has been identified to be row ordering in the (001) planes. The reaction behaviors of sodiation are also compared with lithiation in SnS2 nanostructures. Unlike the conversion and ionic bonded intercalation-type electrode materials, in this van der Waals material SnS2 the sodiation and lithiation reactions share great similarities in the dynamics (e.g. asymmetric reaction pathways). However, the high density of defects that are generated at the reaction front during sodiation, was not captured during lithiation probably due to the larger radius and heavy mass for Na ions. These findings provide valuable insights into understanding the underlying ion migration mechanism in the layered transition metal dichalcogenide. The asymmetric sodium insertion and extraction pathways may help us to elucidate the origins of voltage hysteresis and energy efficiency in alkali-metal ion batteries.
B11-O-11 Atomic-scale Tracking Cation Diffusion in Lithium Manganese Oxide

Peng Gao,Ryo Ishikawa,Eita Tochigi,Akihito Kumamoto,Naoya Shibata,Yuichi Ikuhara

DOI: https://doi.org/10.1093/jmicro/dfv081

2015-01-01

Microscopy

Abstract:Solid-state phase transition are ubiquitous and of critical importance to numerous technological applications, including energy conversion and storage systems. These transition processes involve local atomic displacements or long-range atom migration without adding/reducing any atoms. For example, in perovskite ferroelectrics the oxygen octahedron shift and/or rotation results in a first order phase transition-polarization switching [ 1 ]. Investigating the dynamic processes of phase transformation in solids is critical to gain insights to understanding the fundamental physical properties of functional materials and benefiting industrial technologies. Here, we track full atoms motion/shift in lithium manganese oxide during a phase transition from spinel to rocksalt by using atomically resolved aberration corrected scanning transmission electron microscopy and spectroscopy. We find that given energy the transition metal cations can readily hop between oxygen tetrahedral and octahedral sites in lithium manganese oxide similar to lithium diffusion behavior, leaving the anion structure framework almost unchanged. During phase transition, the transition metal cation migration path, intermediate state, migration length, and atomic structure of phase boundaries are discovered and the mechanism is discussed. Our observations help us to understand the past experimental phenomena and provide useful information to stabilize the structure of electrode materials and thus improve the life of lithium ion batteries.
In-situ Electron Diffraction Studies of Sodium Electrochemistry in MoS2

Jinsong Wu,Qianqian Li,Zhenpeng Yao,Sagar Mitra,Shiqiang Hao,Tuhin Subhra Sahu,Yuan Li,Christopher M. Wolverton,Vinayak P. Dravid

DOI: https://doi.org/10.1017/s1431927617010911

IF: 4.0991

2017-01-01

Microscopy and Microanalysis

Abstract:MoS2 is a promising electrode materials for sodium-ion batteries. In the structure of MoS2, there is adequate “space” between the MoS2 layers interconnected with weak van der Waals force to accommodate Na ions during charging. It turns out that MoS2 allows Na ions to intercalate therein without a significant volume expansion (1); which enables MoS2 to be a promising electrode material for rechargeable batteries (2). However, the number of the electrons can be accommodated in the S-MoS layer is limited while the structural framework remains stable. It has been shown that up to 1.5 electrons can be stored per unit formula in MoS2 before the layered structure collapses (3). Meanwhile, there is a structural transition between trigonal 2Hand octahedral 1T-AMoS2 (A = Li, Na, K, etc.) accompanied by an electronic state change from semiconducting to metallic observed upon alkali-metal ion’s intercalation (4). Recent developments of in-situ transmission electron microscopy (TEM), as one unique tool to conduct real time structural measurements under the dynamic electrochemical reaction processes. (5) Such in-situ or in-operando measurements make it possible to analyze and tackle the intricacies of the sodiation mechanism in electrode materials during charge/discharge cycles.
Real-Time Visualization of Solid-Phase Ion Migration Kinetics on Nanowire Monolayer.

Zhen He,Li Ge Chang,Yue Lin,Feng-Lei Shi,Ze-Dong Li,Jin-Long Wang,Yi Li,Rui Wang,Qing-Xia Chen,Yu-Yang Lu,Qing-Hua Zhang,Lin Gu,Yong Ni,Jian-Wei Liu,Jian-Bo Wu,Shu-Hong Yu

DOI: https://doi.org/10.1021/jacs.0c02137

IF: 15

2020-01-01

Journal of the American Chemical Society

Abstract:Ion migration has been recognized as a critical step in determining the performance of numerous devices in chemistry, biology, and material science. However, direct visualization and quantitative investigation of solid-phase ion migration among anisotropic nanostructures have been a challenging task. Here, we report an in-situ ChemTEM method to quantitatively investigate the solid-phase ion migration process among coassembled nanowires (NWs). This complicated process was tracked within a NW and between NWs with an obvious nanogap, which was revealed by both phase field simulation and ab initio modeling theoretical evaluation. A migration "bridge" between neighboring NWs was observed. Furthermore, these new observations could be applied to migration of other metal ions on semiconductor NWs. These findings provide critical insights into the solid-phase ion migration kinetics occurring in nanoscale systems with generality and offer an efficient tool to explore other ion migration processes, which will facilitate fabrication of customized and new heteronanostructures in the future.
Atomic-Scale Probing of the Dynamics of Sodium Transport and Intercalation-Induced Phase Transformations in MoS2

Peng Gao,Liping Wang,Yu-Yang Zhang,Yuan Huang,Kaihui Liu

DOI: https://doi.org/10.1021/acsnano.5b04950

IF: 17.1

2015-01-01

ACS Nano

Abstract:For alkali-metal-ion batteries, probing the dynamic processes of ion transport in electrodes is critical to gain insights into understanding how the electrode functions and thus how we can improve it. Here, by using in situ high-resolution transmission electron microscopy, we probe the dynamics of Na transport in MoS2 nanostructures in real-time and compare the intercalation kinetics with previous lithium insertion. We find that Na intercalation follows the two-phase reaction mechanism, that is, trigonal prismatic 2H-MoS2 → octahedral 1T-NaMoS2, and the phase boundary is ∼2 nm thick. The velocity of the phase boundary at u003c10 nm/s is 1 order smaller than that of lithium diffusion, suggesting sluggish kinetics for sodium intercalation. The newly formed 1T-NaMoS2 contains a high density of defects and series superstructure domains with typical sizes of ∼3–5 nm. Our results provide valuable insights into finding suitable Na electrode materials and understanding the properties of transition metal dichalcogenid...
Microstructure Evolution and Crystallography of the Phase-Change Material TiSbTe Films Annealed in Situ

Yong-Jin Chen,Bin Zhang,Qing-Qing Ding,Qing-Song Deng,Yan Chen,Zhi-Tang Song,Ji-Xue Li,Ze Zhang,Xiao-Dong Han

DOI: https://doi.org/10.1016/j.jallcom.2016.03.231

IF: 6.2

2016-01-01

Journal of Alloys and Compounds

Abstract:In this work, the morphology, crystallization process and crystal structure of the phase-change material TiSbTe (TST) alloy have been successfully established, which is essential for applying this alloy in phase-change memory. Specifically, atomic force microscopy (AFM) was employed to characterize the asdeposited and post-annealed thin films, and transmission electron microscopy (TEM) analyses of the films annealed in situ were used in combination with selected-area electron diffraction (SAED) and radial distribution function (RDF) analyses to investigate the structural evolution from the amorphous phase to the polycrystalline phase. Moreover, the presence of structures with medium-range order in amorphous TST, which is beneficial for high-speed crystallization, was indicated by the structure factors S(Q)s. The crystallization temperature was determined to be approximately 170 degrees C, and the grain size varied from several to dozens of nanometers. As the temperature increased, particularly above 200 degrees C, the first single peak of the rG(r) curves transformed into double shoulder peaks due to the increasing impact of the Ti-Te bonds. In general, the majority of Ti atoms were doped into the SbTe lattice and tended to form structural defects, whereas the remainder of the Ti atoms aggregated, leading to the appearance of TiTe2 phase separation, as confirmed by the SAED patterns, high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) images and corresponding energy-dispersive X-ray (EDX) mappings. (C) 2016 Elsevier B.V. All rights reserved.
In Situ Atomic-Scale Deciphering of Multiple Dynamic Phase Transformations and Reversible Sodium Storage in Ternary Metal Sulfide Anode

Ruining Fu,Jianhai Pan,Mingyuan Wang,Huihua Min,Hanghang Dong,Ran Cai,Zhefei Sun,Yuwei Xiong,Fuhan Cui,Shuang-Ying Lei,Shuangqiang Chen,Jing Chen,Litao Sun,Qiaobao Zhang,Feng Xu

DOI: https://doi.org/10.1021/acsnano.3c02138

IF: 17.1

2023-06-17

ACS Nano

Abstract:Ternary metal sulfides (TMSs), endowed with the synergistic effect of their respective binary counterparts, hold great promise as anode candidates for boosting sodium storage performance. Their fundamental sodium storage mechanisms associated with dynamic structural evolution and reaction kinetics, however, have not been fully comprehended. To enhance the electrochemical performance of TMS anodes in sodium-ion batteries (SIBs), it is of critical importance to gain a better mechanistic...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Tracking Sodium Migration in TiS2 Using in Situ TEM.

Modulation of electronic state in copper-intercalated 1T-TaS 2

Pressure-modulated Lattice Structural Evolution in TiS2.

In situ imaging the dynamics of sodium metal deposition and stripping

Tracking The Effect Of Sodium Insertion/Extraction In Amorphous And Anatase Tio2 Nanotubes

Tracking the Effect of Sodium Insertion/Extraction in Amorphous and Anatase TiO<sub>2</sub> Nanotubes

Lattice Distortion and Charge Density Wave in Na2Ti2Sb2O Revealed by Scanning Tunnelling Microscopy

In situ TEM observing structural transitions of MoS2 upon sodium insertion and extraction

In-situ Investigation of Pressure Effect on Structural Evolution and Conductivity of Na3SbS4 Superionic Conductor

Defects Controlled Doping and Electrical Transport in TiS2 Single Crystals

In-situ TEM Investigation of MoS2 Upon Alkali Metal Intercalation

In situ TEM Observation of Resistance Switching in Titanate Based Device

In Situ Observation Of Divergent Phase Transformations In Individual Sulfide Nanocrystals

Tracking the Chemical and Structural Evolution of the TiS2 Electrode in the Lithium-Ion Cell Using Operando X-ray Absorption Spectroscopy

In situ atomic-scale observation of reversible sodium ions migration in layered metal dichalcogenide SnS2 nanostructures

B11-O-11 Atomic-scale Tracking Cation Diffusion in Lithium Manganese Oxide

In-situ Electron Diffraction Studies of Sodium Electrochemistry in MoS2

Real-Time Visualization of Solid-Phase Ion Migration Kinetics on Nanowire Monolayer.

Atomic-Scale Probing of the Dynamics of Sodium Transport and Intercalation-Induced Phase Transformations in MoS2

Microstructure Evolution and Crystallography of the Phase-Change Material TiSbTe Films Annealed in Situ

In Situ Atomic-Scale Deciphering of Multiple Dynamic Phase Transformations and Reversible Sodium Storage in Ternary Metal Sulfide Anode