Abstract:Supercapacitors are gaining increasing attention for complementing or replacing batteries and they are highly desirable in applications where high power and long cycle life of energy storage devices are needed. Activated carbons (AC) are the most promising electrodes in the supercapacitor industry presenting the best performances/cost compromise. Recently, graphene, with a two dimensional carbon nanostructure, has emerged as a new class of promising electrode material in supercapacitors, due to its outstanding properties such as high electric conductivity, high surface area, good mechanical properties and chemical inertia. Among the various approaches to producing graphene materials, here we focus on reduced exfoliated graphene oxide (r-GO) derived from chemically synthesised graphene oxide (GO). However, the graphene materials prepared by either chemical or thermal reduction of the graphene oxide always exhibits a relatively low electrochemical performance due to the agglomeration of graphene sheets and does not reflect the intrinsic capacitance of an individual graphene nano-sheet. To exploit the potential electrochemical applications for graphene, a particularly attractive option is to design and develop composites of graphene with other materials. In this study, we present an approach to synthesize a composite of reduced graphene oxide (r-GO) with activated carbon and its use as an electrode material in supercapacitors. To the best of our knowledge, a few studies on the preparation of GO/AC composites have been reported so far. Graphene oxide was synthesised using vein graphite by a modified Hummers method and then mixed with activated carbon to prepare a homogeneous composite. The composite was thermally reduced to convert GO in to r-GO. The morphology and chemical structure of the materials were characterized by means of Electron microscopy, Raman spectroscopy, X-ray diffraction and Fourier Transform Infrared Spectroscopy. Thermal properties were investigated using Thermo Gravimetric Analysis. The electrochemical properties of as obtained composites with different mass ratios were investigated, together with their individual components (GO, r-GO and AC) for comparison. For electrochemical characterisation, two-electrode symmetrical supercapacitor cells were constructed and characterized by cyclic voltammetry and electrochemical impedance spectroscopy. Tetraethylammonium tetrafluoroborate (TEABF4) in Propylene Carbonate (PC) was used as the electrolyte. The CV curves were measured from 0 to 1 V with various scan rates ranging from 10 to 1000 mV s −1 and the CV data were used to calculate the specific capacitances of the electrodes. The results showed that the as-prepared composites exhibited an improved electrochemical performance as compared to pure r-GO or AC. This improvement can be attributed to the synergistic effect of AC and r-GO. The maximum specific capacitance observed for the r-GO/ AC composite was 115.6 F/g at a scan rate of 10 mV s -1 . The near-rectangular CV curves at ultrafast sweep rate of 1000 mV s -1 indicated very efficient charge transfer within the composite electrodes. The incorporation of rGO into AC, not only provides the vacancies to accommodate ions, but also forms a promising network structure to conductively bridge the spaces between the AC particles, which can facilitate rapid transport of the electrolyte ions within the electrode materials, leading to a high-rate performance of the supercapacitor. Within the composite, r-GO plays the role of both the binder and the conductive additive increasing the specific capacitance and the power density of the devices.

Maximizing ion accessibility and electron transport in cationic bacterial cellulose/graphene electrode with superior capacitance and cycling stability

Pseudocapacitance And Excellent Cyclability Of 2,5-Dimethoxy-1,4-Benzoquinone On Graphene

Pseudocapacitance and Excellent Cyclability of Quinones on 2D Graphene

Boosting the Energy Storage Densities of Supercapacitors by Incorporating N-doped Graphene Quantum Dots into Cubic Porous Carbon

Flexible Ti‐Doped FeOOH Quantum Dots/Graphene/Bacterial Cellulose Anode for High‐Energy Asymmetric Supercapacitors

Metal–organic Framework-Derived High Conductivity Fe3C with Porous Carbon on Graphene As Advanced Anode Materials for Aqueous Battery-Supercapacitor Hybrid Devices

Fabrication of 3D bacterial cellulose intercalated MoS2@rGO nanocomposite for high performance supercapacitor

Graphene Oxide and Activated Carbon Composites for High-Power Supercapacitors

Synergistic Effect of Fe3O4/reduced Graphene Oxide Nanocomposites for Supercapacitors with Good Cycling Life

Large Areal Mass and High Scalable and Flexible Cobalt Oxide/Graphene/Bacterial Cellulose Electrode for Supercapacitors

Nanocellulose/nitrogen and fluorine co-doped graphene composite hydrogels for high-performance supercapacitors

Design and Fabrication of Advanced Cathode and Anode Materials for Hybrid Supercapacitors Based on Graphitic Carbon Quantum Dot-Decorated Reduced Graphene Oxide Composite Aerogels

Cross-linked and Pillared Graphene with Nonconventional Redox Benzidine Dimethyl Ether for High-performance Supercapacitors

High-performance Supercapacitors Based on Reduced Graphene Oxide -Wrapped Carbon Nanoflower with Efficient Transport Pathway of Electrons and Electrolyte Ions

Azure B microspheres/nitrogen-doped reduced graphene oxide: Non-covalent interactions based crosslinking fabrication for high-performance supercapacitors

ZnCo2O4-reduced Graphene Oxide Composite with Balanced Capacitive Performance in Asymmetric Supercapacitors

A high-energy, long cycle-life hybrid supercapacitor based on graphene composite electrodes

Construction of ion/electron transfer multi-channels for the composite film electrode from GO and cellulose derived porous carbon in supercapacitor

Application of N/P-rGO composite electrode materials and novel electrolytes in high-performance supercapacitors

Bio-waste derived 2 D rGO sheet supported Co 9 Se 8 hybrid composite electrode for high performance supercapacitor applications

Scalable preparation of three-dimensional porous structures of reduced graphene oxide/cellulose composites and their application in supercapacitors