Abstract:The object of research is the sound field from linear sound sources around a rounded noise barrier of the same height and different angles of inclination of the top part of the barrier. It is known that the effectiveness of noise protection barriers depends primarily on the geometric dimensions of the barrier and the relative position of the sound source, barrier and area of noise protection. A large number of publications have been devoted to the study of the influence of these factors and some others, such as the influence of the earth's surface, sound absorption, sound insulation of the barrier. However, these works did not study the effect of the angle of the top part of the barrier on the change in the barrier efficiency. In this paper, the reduction of sound levels from linear sound sources around noise barriers with different inclination angle of the top part of the barrier is investigated. Rounded barriers of the same height with different radii are considered, which made it possible to simulate barriers in which the top part of the barrier has a different inclination angle. An effectiveness of such barriers for various locations of the sound source, which could also affect the establishment of a pattern of changes in the effectiveness of barriers, is also considered. In addition, the results were analyzed over a wide frequency range. The calculation of the field around such a barrier was carried out using computer simulation using the finite element method. This method allows to easily change the geometric parameters of the barrier and the position of the sound source. The barriers were considered acoustically hard. Thus, an influence of the inclination angle of the top part of the barrier on the sound field around the barrier from various locations of sound sources in a wide frequency range is analysed. The results must be taken into account when designing noise barriers to reduce noise levels from traffic flows

Effect of Layouts of Wells and the Walls of Wells on Noise Reduction Effect

Research on the Well at the Top Edge of Noise Barrier

Noise Control for Slipway and Prediction of Barrier Noise Reduction Effect

Performance Analysis of the Wave Trapping Barrier

Noise Reduction for Sound Barrier in Rail Traffic

Optimization and Experiment on the Top Form of Urban Elevated Road Noise Barrier

A mechanism study of sound wave-trapping barriers

Effects of the Top Edge Impedance on Sound Barrier Diffraction

Study on Noise Reduction Performance of Sound Barrier with Acoustic Diffusers

Study on Barrier Properties with Different Top Shapes by Using Boundary Element Method

Additional noise reduction with diffracting elements on barriers using numerical and standard calculation methods

Prediction of Noise Reduction Effect of Sound Barriers and Evaluation of Noise Annoyance

Insert loss experiment and acoustic impedance theoretical study on the noise barrier with MPP-QRD top structure

Modeling, analysis, and validation of an active T-shaped noise barrier

Research on noise reduction characteristic of sound barrier on natural draft wet cooling towers

An Underground Barrier of Locally Resonant Metamaterial to Attenuate Surface Elastic Waves in Solids

Influence estimation of the inclination angle of the top of the noise protection barrier on its efficiency

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments

Effects of the soil on the noise attenuation of environmental berm barriers

Analysis of the effect of combined noise reduction measures of trapezoidal sleeper and sound barrier on elevated line

Performance of a Planar Virtual Sound Barrier at the Baffled Opening of a Rectangular Cavity.