Abstract:Sodium-ion batteries (SIBs) have recently garnered considerable attention because of the greater abundance, wider distribution, and lower cost of Na compared to Li. However, the investigation is insufficient, mainly because Na+ is larger and heavier than Li+, thereby limiting the Na+ insertion and extraction ability from the host materials. Anodes with alloying reactions such as Sn, Ge, and Sb have been considered for SIBs owing to their high gravimetric and volumetric specific capacities. In this study, we devised a one-pot reaction strategy for the in-situ fabrication of a spherical porous nano- SnSb/C composite by employing aerosol spray pyrolysis, and subsequently applied it as an anode in SIBs. The products of spray pyrolysis generally feature three-dimensional spherical hierarchical structures, which are considered to be relatively stable and also act as high-packing-density electrode materials. Additionally, they can be easily handled during the fabrication of the electrode. By adjusting the precursor concentration of SnCl2.2H(2)O and SbCl3, different sizes for SnSb nanoparticles (10 and 20 nm) were obtained. The crystal structures and morphologies of the as-prepared samples were characterized using X-ray diffraction, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy. Thermal gravimetric analysis was carried out to analyze the carbon content of SnSb/C composites by using a TG-DSC analyzer with a heating rate of 5 degrees C.min(-1) in air from 25 degrees C to 600 degrees C. The specific surface areas of the microspheres were determined by Brunauer-Emmett-Teller analysis. X-ray photoelectron spectroscopy and Raman spectroscopy were used to investigate the studied materials. The micro-nanostructured composite is composed of SnSb nanoparticles (10 and 20 nm); moreover, the carbon content and size of SnSb nanograins could be controlled by altering the reaction conditions. Owing to its unique structure, the obtained nano-composite displays stable cycle performance and high rate capability as the anode for SIBs. The specific capacity of 10-SnSb/C was 722.1 mAh.g(-1) at the first cycle, and the coulombic efficiency of the first cycle was 86.3%. The 10-SnSb/C was stable at different current densities of 100, 1000, and 3000 mA.g(-1), and exhibited specific capacities of 607.7, 645.4 and 452.2 mAh.g(-1), respectively. The reversible capacity reached 623 mAh.g(-1) after 200 cycles at a current density of 1000 rnA.g(-1), and the capacity retention rate was 95%. The outstanding performance of SnSb/C was due to its distinctive nanostructure, which could effectively improve the utilization rate of active materials, facilitate the transportation of Na+ ions, and prevent the nanoparticle pulverization/agglomeration upon prolonged cycling. The facile synthesis technique and good performance would shed light on the practical development of SnSb/C nanocomposites as high rate capability and long cycle life electrodes for SIBs.

Alloying Boosting Superior Sodium Storage Performance in Nanoporous Tin-Antimony Alloy Anode for Sodium Ion Batteries

Bimetallic Copper Tin Sulfide Nanosheet Arrays Encapsulated in Nitrogen-Doped Carbon Shells for Boosted Sodium Storage Performance

Enhanced rate performance of nanoporous nickel-antimony anode for sodium ion batteries

Highly Reversible Alloying/dealloying Behavior of SnSb Nanoparticles Incorporated into N-rich Porous Carbon Nanowires for Ultra-Stable Na Storage

Bismuth−Antimony Alloy Embedded in Carbon Matrix for Ultra-Stable Sodium Storage

High-performance and Sodiation Mechanism of a Pulse Potential-Electrodeposited Sb-Zn Alloy As an Anode for Sodium-Ion Batteries

A High‐Performance Alloy‐Based Anode Enabled by Surface and Interface Engineering for Wide‐Temperature Sodium‐Ion Batteries

A Dealloying Synthetic Strategy for Nanoporous Bismuth-Antimony Anodes for Sodium Ion Batteries.

Understanding the boosted sodium storage behavior of nanoporous bismuth-nickel anode using operando X-ray diffraction and density functional theory calculations

Electrolyte Boosting Microdumbbell-Structured Alloy/Metal Oxide Anode for Fast-Charging Sodium-Ion Batteries

Composites of SnSb Nanoparticles Embedded in Porous Carbon Nanofibers Wrapped with Reduced Graphene Oxide for Sodium Storage

Scalable, colloidal synthesis of SnSb nanoalloy‐decorated mesoporous 3D NiO microspheres as a sodium‐ion battery anode

Synergistic Bimetallic Effects of BiSb Anodes Enable Long‐Stable Sodium Storage

A mesoporous antimony-based nanocomposite for advanced sodium ion batteries

Tin and Tin Compounds for Sodium Ion Battery Anodes: Phase Transformations and Performance

Reversible conversion-alloying of Sb2O3 as a high-capacity, high-rate, and durable anode for sodium ion batteries.

Electrochemically alternating voltage induction and in-situ preparation of tin-based multiphase structures anode for sodium-ion batteries

Carbon Coated Amorphous Bimetallic Sulfide Hollow Nanocubes Towards Advanced Sodium Ion Battery Anode

Synthesis of Hollow SnO2/SnS2 Hybrids and Their Application in Sodium‐Ion Batteries

Heterostructured NiS 2 @sns 2 Hollow Spheres As Superior High-Rate and Durable Anodes for Sodium-Ion Batteries

Spherical Nano-SnSb/C Composite as a High-Performance Anode Material for Sodium Ion Batteries