Abstract:The Geostationary Operational Environmental Satellite (GOES) mission consists of a series of three-axis body-stablized geosynchronous satellites operated by National Oceanic and Atmospheric Admistration (NOAA) that provide continuous stream of data covering the United States and its neighbring environs. Two significant issues associated with the three-axis stablized platforms were recognized in the process of onboard calibration for the infrared data: extraneous heating of the instruments around satellite midnight time, and the changes of scan mirror emissivity with incoming radiation at east-west scan direction. In operation, the Midnight Blackbody Calibration Correction (MBCC) method based on the relationship between day-time calibration data and telemetry temperature was developed to empirically compensate for the errorreous instrument responsivity near midnight. The variation in scan mirror emissivities was corrected with a set of fixed angle-dependent correction coefficients derived from full-disk scan space view data. However, uncertaity remains with MBCC calibration accuracy and the scan angle calibration residuals. The objective of this study is to investigate the impact of the MBCC on the diurnal calibration accuracy of the GOES-11 and -12 Imager infrared (IR) channels, as well as to examine the scan-mirror emissivity calibration residuals using collocation data generated by the Global Space based Inter-Calibration System (GSICS) baseline algorithm. Using two new generation hypespectral instruments onboard low-earth orbital (LEO) satellites as references, the results of this study show that most IR channels, especially the long-wave channels, have apparent diurnal calibration variations. The MBCC method, once implemented, can reduce the diurnal calibration variation except for Ch4(10.7μm) on both GOES-11/12 Imagers. Analysis of the GOES with IASI night-time collocation data (before 10:00pm) indicates that scan-angle calibration residual at each IR channel is very small with uncertainty less than 0.1K. The day-time collocation data may be affected with the anisotropic reflectance/emissivity of the collocated scenes. Our results suggest that either night-time GOES vs. IASI collocation data (taken before the midnight calibration anomaly) or daytime collocated scenes taken nadir/near nadir should be used to generate the GSICS GEO-LEO correction coefficients to improve the calibration accuracy of the operational GOES Imager instruments.

IIM DATA PROCESSING FLOW AND ITS GEOLOGICAL APPLICATION

A Preliminary Experience in the Use of Chang’E-1 IIM Data

Absolute Calibration of the Chang’E-1 IIM Camera and Its Preliminary Application

Research on Photometric Calibration and Reflectance Calculation of CE-1 IIS Data

Modeling, Simulation, Inversion and Chang E-1 Data Validation for Microwave Emission Remote Sensing of Lunar Surface Media

Quantitative Inversion of Lunar Surface Chemistry Based on Hyperspectral Feature Bands and Extremely Randomized Trees Algorithm

Photometric Correction of Chang’E-1 Interference Imaging Spectrometer’s (IIM) Limited Observing Geometries Data with Hapke Model

Simulation Study of the Lunar Spectral Irradiances and the Earth-Based Moon Observation Geometry

Regional Lithological Mapping Using ASTER-TIR Data: Case Study for the Tibetan Plateau and the Surrounding Area

Modeling the Reflectance of the Lunar Regolith by a New Method Combining Monte Carlo Ray Tracing and Hapke’s Model with Application to Chang’E-1 IIM Data

Automatic Extraction of 3-D Information of Lunar Surface Rocks Using Topography Data

Summarizing the Technical Flow and Main Approaches for Discrimination and Mapping of Rocks and Minerals Using Hyperspectral Remote Sensing

Instrument Overview and Radiometric Calibration Methodology of the Non-Scanning Radiometer for the Integrated Earth–Moon Radiation Observation System (IEMROS)

Fabric Simulation and Mechanical Characteristics Test and Analysis of Icy Lunar Regolith

In-orbit lunar imaging and analysis for optical remote sensing satellite

Evaluation of Radiometric Calibration Accuracy of GOES Imager Infrared Data Using GSICS GEO-LEO Data

Qualitative Verification of CE-2's Microwave Measurement: Relative Calibration Based on Brightness Temperature Model and Data Fusion

A Semiautomatic Registration Method for Chang'E-1 IIM Imagery Based on Globally Geo-Reference LROC-WAC Mosaic Imagery.

Centimeter-resolution topographic modeling and fine-scale analysis of craters and rocks at the Chang'E-4 landing site

Scattering and Emission Models and Simulations for Lunar Exploration

Ion Microprobe Microanalytical Techniques and their Applications in Earth Sciences