Abstract:Non-cooperative target capturing is a great challenge for space robots among space tasks, because of the difficulty of target detumbling and base stability maintaining, which increasing the requirements for the control performances of the attitude control systems. In this paper, a contact force model combining an optimized Hertz's model and the LuGre friction model is established, to estimate the contact force without additional sensors. And a novel control methodology for stabilization control of space robot based on an adaptive backstepping nonsingular fast integral terminal sliding mode control (ABNFITSMC) is developed, which significantly improve the convergence speed and satisfied the requirements of robustness of the complex system after capturing. First, the fully controllable dynamic model of the free-flying (no position control) space robot is established by using the Lagrange method. Then, the contact force between the end effector (gripper) and the target is analyzed by combining modified Hertz model and the LuGre friction model. Finally, a novel nonsingular fast integral terminal sliding mode (NFITSM) surface is proposed, so a finite-time convergence, non-singularity, fast transient response, precise trajectory tracking, robustness with uncertainties and disturbances is achieved. Then, an adaptive control law is used to approximate the upper bound value of the disturbance and uncertainties, and a backstepping control method is employed to guaranty the global asymptotic stability of the control system. The numerical simulation results show that the proposed algorithm can stable the attitude of the space robot in a quick limited time, and reduce the chattering significantly compared to the traditional sliding surface, the results demonstrates the superior performance of the proposed approach., and proves the feasibility of its application in non-cooperative target capturing task.

Constrained Compliant Control for Space Robot Postcapturing Uncertain Target

Control Barrier Function Based Trajectory Generation and Tracking Control for Spacecraft Inspection Mission under Multiple Safety Constraints

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Adaptive Compliant Controller for Space Robot Stabilization in Post-Capture Phase

Postcapture Stabilization of Space Robots Considering Actuator Failures with Bounded Torques

Stabilization and Parameter Identification of Tumbling Space Debris with Bounded Torque in Postcapture

Event-Triggered Adaptive Control for Practically Finite-Time Position-Constrained Tracking of Space Robot Manipulators

Contraction Theory Based Trajectory Tracking Control of Free-Floating Space Manipulator

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Modeling, Cooperative Planning and Compliant Control of Multi-arm Space Continuous Robot for Target Manipulation

Whole-body Compliance for Multi-Arm Space Robotic Capturing of Large Tumbling Target in Connection Compliant Phase

Space Robot Capture Colli Sion F Orce Control Method Based on Expli Ci T F Orce Control

Stabilization Control for Spacecraft-manipulator System After Capturing Tumbling Target

Compliant Control Of A Space Robot With Multi Arms For Capturing Large Tumbling Target

Impedance-Sliding Mode Control With Force Constraints for Space Robots Capturing Non-Cooperative Objects

Capturing a Space Target Using a Flexible Space Robot

Coordinated Hierarchical Control of Space Robotic Safe Manipulation with Load Sharing

Buffer Compliance Control of Space Robots Capturing a Non-Cooperative Spacecraft Based on Reinforcement Learning

Synthetic Control with Target Sticking for On-Orbit Capturing Using a Dual-Arm Space Robot

Dynamics and Control of Noncooperative Space Target Capture Using a Flexible Manipulator

Compliance Resistance Collision Control for Operating a Space Robot to Capture a Non-cooperative Spacecraft