Abstract:The structure of a TBC is locally tailored oriented by regional performance requirements to balance the tradeoff between high thermal insulation and long lifespan. The design‐matched TBCs exhibited double the lifespan of the conventional sample with comparable thermal insulation. Mechanism responsible for the long life span was revealed based on healing of the intrinsic two‐dimensional pores and formation of new large pores. Thermal barrier coatings (TBCs) require both a porous structure to effectively prevent heat flux and a considerably dense structure to resist cracking for long‐term protection. These opposite requirements are difficult to achieve in conventional TBCs, which often exhibit uniform structures across their thickness. In fact, the main requirements of a coating vary with thickness owing to differential service conditions. In this study, the structure of a TBC is locally tailored to meet regional performance requirements. First, the load‐bearing conditions across the thickness are investigated in a simulation study. Resulting from multiple causes, the bottom region must bear a larger stress than the top region, which is directly exposed to heat flux. Therefore, the structure should be crack‐resistant in its bottom region and thermally insulating in its top region. Second, region‐function‐matching TBCs were prepared, and their performances were evaluated through isothermal cycling and thermal exposure tests. Results show that the TBCs with matching design exhibited double the lifespan of the conventional samples, whereas the thermal insulation was comparable. Finally, the structural evolutions were examined in different regions to analyze the failure behaviors of the TBCs. Healing of the intrinsic two‐dimensional pores and formation of the new large pores mainly account for the changes in thermal and mechanical properties of the TBCs. Overall, this region‐function‐matching design is expected to balance the tradeoff between high thermal insulation and long lifespan.

Prolong the Durability of La2Zr2O7/YSZ TBCs by Decreasing the Cracking Driving Force in Ceramic Coatings

Extend the Thermal Cyclic Lifetime of La2Zr2O7/YSZ DCL TBCs by Reducing Modulus Design on a Toughening Ceramic Surface

Thermal Gradient Cyclic Lifetime of La2Zr2O7/YSZ Double Ceramic Layer Thermal Barrier Coatings with Equivalent Thermal Insulation Performance

Gradient thermal cyclic behaviour of La2Zr2O7/YSZ DCL-TBCs with equivalent thermal insulation performance

Sintering governing the cracking behaviors of different La2Zr2O7/YSZ ceramic layer combination TBCs at 1150 °C

LaYbZrO thermal barrier coatings by EB-PVD: Microstructure, thermal shock life and failure behaviors

Cracking Behavior of Gd2Zr2O7/YSZ Multi-Layered Thermal Barrier Coatings Deposited by Suspension Plasma Spray

Region‐function‐matching design for YSZ‐based thermal barrier coatings enables long thermal cyclic lifespan

Improve durability of plasma-splayed thermal barrier coatings by decreasing sintering-induced stiffening in ceramic coatings

A Novel Plasma-Sprayed Durable Thermal Barrier Coating with a Well-Bonded YSZ Interlayer Between Porous YSZ and Bond Coat

Thermal shock life and failure behaviors of La2Zr2O7/YSZ, La2Ce2O7/YSZ and Gd2Zr2O7/YSZ DCL TBCs by EB-PVD

Thermal cycling performance of GYbZ/YSZ thermal barrier coatings with different microstructures based on finite element simulation

Thickness-related failure behaviors of the thermal barrier coatings under thermal gradient cycling

A novel structure design towards extremely low thermal conductivity for thermal barrier coatings - Experimental and mathematical study

Matching Design of Thickness Ratio to Extend the Lifespan of Double-Layered Thermal-Barrier Coatings

Sintering Induced the Failure Behavior of Dense Vertically Crack and Lamellar Structured TBCs with Equivalent Thermal Insulation Performance

Thermal cycling of EB-PVD TBCs based on YSZ ceramic coat and diffusion aluminide bond coat

Thermal Cycling Performance of La2Ce2O7/50 Vol.% YSZ Composite Thermal Barrier Coating with CMAS Corrosion

LC/8YSZ TBCs Thermal Cycling Life and Failure Mechanism under Extreme Temperature Gradients

Thermal Gradient Cyclic Lifetime of DVC and Lamellar Thermal Barrier Coatings with Equivalent Thermal Insulation Performance

Composite Structure of YSZ Embedded in NiCoCrAlTaY Bond Coat Induces Thin and Multilayered Al2O3 Film to Extend the Thermal Cycle Life of Thermal Barrier Coatings