Abstract:With the development of offshore oil and gas fields, the oil–water two-phase mixing flow-transmission technology has been widely used in subsea pipelines. The high water cut and multiphase flow regime induce harsh and complex corrosion conditions; hence, mild steels combined with corrosion inhibitors are used in the construction of offshore pipelines for corrosion control. However, corrosion failure cases show that severe localized corrosion constantly occurs at the oil–water interface in oil–water mixed transmission pipelines, and the understanding of the mechanism and inhibition effect of corrosion inhibitors is limited. Moreover, laboratory studies on CO2 corrosion problems in oil–water mixed transmission pipelines usually consider only pure-water systems to simulate the corrosive environment. These studies seldom regard the effect of the oil phase on the corrosion process even though the actual production and transportation of fluids often involves multiphase mixed media. The oil phase is one of the important factors that affect corrosion behavior. Studies on the impact of the oil phase on the inhibition effect of corrosion inhibitor are still relatively lacking. Further studies on the inhibition effect of corrosion inhibitor in oily corrosive environments of oil–water mixed transmission pipelines are needed. In this study, the inhibition effect and mechanism of a corrosion inhibitor at the oil–water two-phase interface under flow conditions were investigated using the rotating cylindrical electrode (RCE) technique combined with electrochemical methods (electrochemical impedance spectroscopy and polarization curve analysis), laser scanning confocal microscopy, scanning electron microscopy, and UV-VIS spectrophotometry. The results reveal that 100 mg·L−1 of seventeen alkenyl amide ethyl imidazoline quaternary ammonium salt as a corrosion inhibitor in carbon steel for an aqueous phase of the oil–water two-phase stratified medium exhibits significant inhibition effect, and the corrosion inhibition efficiency reachs 99%. However, the effective mass fraction of the corrosion inhibitor decreases to 31% before mixing at the oil–water interface because of the presence of oil. As a result, the corrosion inhibition efficiency is only 83%, and the inhibition effect is poor; moreover, the corrosion of carbon steels cannot be effectively controlled. Further, significant groove corrosion is observed at the oil–water interface. Therefore, the corrosion of the sample in the oil area is slight, and the inhibitor can effectively inhibit the corrosion of X65 steel in the water area.

Corrosion inhibition performance of imidazolidine derivatives for J55 pipeline steel in acidic oilfield formation water: Electrochemical, surface and theoretical studies

Electrochemical, Surface and Quantum Chemical Studies of Novel Imidazole Derivatives As Corrosion Inhibitors for J55 Steel in Sweet Corrosive Environment

Electrochemical Study of Corrosion Inhibition of Carbon Steel During Oil/Water Intermittent Wetting

Effect of Electron Donating Functional Groups on Corrosion Inhibition of J55 Steel in a Sweet Corrosive Environment: Experimental, Density Functional Theory, and Molecular Dynamic Simulation

An Impending Inhibitor Useful for the Oil and Gas Production Industry: Weight Loss, Electrochemical, Surface and Quantum Chemical Calculation

Exploration of inhibitory performance of imidazoline on J55 steel

Study of the Inhibition Mechanism of Imidazoline Derivative Inhibitor on CO2 Corrosion for Q235 Steel

Experimental and Computational Approach on the Development of a New Green Corrosion Inhibitor Formulation for N80 Steel in 20% Formic Acid.

Effect of Oil-Water Intermittent Wetting on Corrosion Inhibition of Carbon Steel in CO2 Environment

Theoretical and Experimental Studies for Corrosion Inhibition Performance of Q235 Steel by Imidazoline Inhibitors Against CO2 Corrosion

Corrosion Inhibition of Carbon Steel in Co2-Containing Oilfield Produced Water in the Presence of Iron-Oxidizing Bacteria and Inhibitors

Investigation of the Corrosion Characteristics and Corrosion Inhibitor Action on J55 Steel in Produced Water

Effective inhibition on the corrosion of X65 carbon steel in the oilfield produced water by two Schiff bases

Synthesis and Investigation of Pyran Derivatives As Acidizing Corrosion Inhibitors for N80 Steel in Hydrochloric Acid: Theoretical and Experimental Approaches

Effect of Oil-Water Intermittent Wetting on Corrosion Inhibition of Carbon Steel in CO2 2 Environment

Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions

Inhibition Effect and Mechanism of Corrosion Inhibitor at Oil-Water Interface Region

Corrosion Behavior of N80 and 13cr Steel in Presence of Imidazoline Based Inhibitor in Three Different Acid Solutions

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

Electrochemical Investigation of Chloride Pitting Attack on Carbon Steel Piping and its Inhibition by Novel Synthesized Cationic Surfactants