Improved hydrogen storage properties of LiBH 4 confined with activated charcoal by ball milling

He Zhou,Xin-Hua Wang,Hai-Zhen Liu,Shi-Chao Gao,Mi Yan

DOI: https://doi.org/10.1007/s12598-018-1067-1

IF: 6.318

2018-01-01

Rare Metals

Abstract:In order to enhance the hydrogen storage properties of LiBH 4 , activated charcoal (AC) was used as the scaffold to confine LiBH 4 in this paper. Ball milling was used to prepare LiBH 4 /AC composites. Experimental results show that dehydrogenation properties of ball-milled LiBH 4 /AC (LiBH 4 /AC-BM) are greatly improved compared with that of pristine LiBH 4 , ball-milled LiBH 4 (LiBH 4 -BM) and hand-milled LiBH 4 /AC (LiBH 4 /AC-HM). The onset dehydrogenation temperature of LiBH 4 for LiBH 4 /AC-BM is around 160 °C, which is 170 °C lower than that of pristine LiBH 4 . At around 400 °C, LiBH 4 /AC-BM finishes the dehydrogenation with a hydrogen capacity of 13.6 wt%, which is approximately the theoretical dehydrogenation capacity of pure LiBH 4 (13.8 wt%), while the dehydrogenation processes for LiBH 4 -BM and LiBH 4 /AC-BM do not finish even when they were heated to 600 °C. The isothermal dehydriding measurements show that it takes only 15 min for LiBH 4 /AC-BM to reach a dehydrogenation capacity of 10.1 wt% at 350 °C, whereas the pristine LiBH 4 and the LiBH 4 /AC-HM release hydrogen less than 1 wt% under the same conditions. The dehydrogenation process and the effect of AC were discussed.