May the Force Be with You: Overlooked Mechanical Signaling.
Gözel Shakeri,John H. Williamson,Stephen Brewster
DOI: https://doi.org/10.1016/j.molp.2019.03.001
IF: 27.5
2019-01-01
Molecular Plant
Abstract:Within multicellular plants, cells constantly communicate with their neighbors and even distant cells. A cell may produce chemical signals, such as peptides and small molecules, and perceive chemical signals from other cells. Thus, signaling chemicals mediate the exchange of information between cells. There is a simpler and faster way for cells to communicate, i.e., a cell can mechanically nudge its neighbors to send a signal. However, mechanical force is often ignored by biologists, partially due to the difficulty in directly visualizing the force, in contrast to visual detection of signaling molecules. Although mechanical transduction between cells is possible and indeed occurs in multicellular animals, it is more efficient in multicellular plants. Plant cells are embedded in an extracellular matrix, termed cell walls, and are unable to migrate because they are effectively glued to each other. Moreover, cell death is rare in young tissues, and plant cells have high turgor pressure, the force that pushes the plasma membrane against cell walls. At a level two to ten times greater than atmospheric pressure (Beauzamy et al., 2015Beauzamy L. Derr J. Boudaoud A. Quantifying hydrostatic pressure in plant cells by using indentation with an atomic force microscope.Biophys. J. 2015; 108: 2448-2456Abstract Full Text Full Text PDF PubMed Scopus (75) Google Scholar), plant cells and tissues are pre-stressed structures (Hamant et al., 2008Hamant O. Heisler M.G. Jönsson H. Krupinski P. Uyttewaal M. Bokov P. Corson F. Sahlin P. Boudaoud A. Meyerowitz E.M. et al.Developmental patterning by mechanical signals in Arabidopsis.Science. 2008; 322: 1650-1655Crossref PubMed Scopus (646) Google Scholar). In fact, a cell experiences stress, which is the force per unit area, from turgor pressure and differential growth, in which slowly growing cells are stretched by fast-growing neighboring cells and vice versa. Thus, stress patterns are well suited to serve as cues for cellular behavior, including morphogenesis. The tissue-shaping trio includes gene regulation, cellular effectors, and tissue-scale coordination. Mechanical signals are suitable for directing both cellular effectors and tissue-scale coordination. Mechanical stress leads to deformation of a solid, which is termed strain. Cell walls serve as the “exoskeleton” of cells, and the balance between turgor pressure and wall extensibility determines growth. Turgor pressure has no direction and is therefore isotropic in all directions. In contrast, wall extensibility can be anisotropic. For a given cell, subcellular wall extensibility can be highly anisotropic to enable divergence in growth. Expanding plant cells are usually covered by primary cell walls, which consist of cellulose microfibrils embedded in a matrix of hemicellulosic and pectic polysaccharides. Cell growth symmetry breaking can be achieved by subcellular asymmetry in wall composition. For example, dark-grown hypocotyls grow asymmetrically to form apical hooks. Growth asymmetry is preceded by, and depends on, a cellular asymmetry in pectin de-methylesterification of bipolar walls. Pectin de-methylesterification in turn determines wall mechanics (Peaucelle et al., 2015Peaucelle A. Wightman R. Hofte H. The control of growth symmetry breaking in the Arabidopsis hypocotyl.Curr. Biol. 2015; 25: 1746-1752Abstract Full Text Full Text PDF PubMed Scopus (180) Google Scholar). Leaf epidermal cells present another striking example of anisotropic cell growth. Interdigitated jigsaw-shaped cells, the major type of leaf epidermal cells, are made up of alternating indentation (neck) and outgrowth (lobed) regions (Figure 1A). Such undulations are absent in young pavement cells and are established during cell maturation. How is this complex morphology established? Computational modeling suggests that alternating anticlinal walls with softer and harder elastic properties can develop into lobes and necks, respectively, when the wall is under tension. Consistent with the model prediction, the mechanical properties of the anticlinal walls of lobes and necks are significantly different. Greater amounts of arabinans and galactans, as well as low methylesterified pectin, are found in softer lobe regions, which may explain the differences in wall mechanics (Majda et al., 2017Majda M. Grones P. Sintorn I.M. Vain T. Milani P. Krupinski P. Zagorska-Marek B. Viotti C. Jonsson H. Mellerowicz E.J. et al.Mechanochemical polarization of contiguous cell walls shapes plant pavement cells.Dev. Cell. 2017; 43: 290-304.e4Abstract Full Text Full Text PDF PubMed Scopus (93) Google Scholar). Anisotropic properties of the cellulose network contribute more broadly to differences in extensibility between individual walls. In contrast to short-chained hemicellulosic and pectic polysaccharides, cellulose microfibrils are long and unbranched. If we liken cell wall components to the makeup of concrete walls, hemicellulose and pectin analogously correspond to concrete, while cellulose microfibrils correspond to the steel reinforcing bars that resist tensile stress. Unlike concrete walls, cell walls are remarkable in their ability to undergo massive expansion. When many cellulose microfibrils are aligned in a particular direction, cell walls resist growth in that direction. Interdigitated jigsaw-shaped cells also illustrate the contribution of cellulose microfibrils to anisotropic cell shape deformation (Figure 1A). Cellulose microfibrils are required for the shaping of pavement cells (Higaki et al., 2017Higaki T. Takigawa-Imamura H. Akita K. Kutsuna N. Kobayashi R. Hasezawa S. Miura T. Exogenous cellulase switches cell interdigitation to cell elongation in an RIC1-dependent manner in Arabidopsis thaliana cotyledon pavement cells.Plant Cell Physiol. 2017; 58: 106-119PubMed Google Scholar), and the determination of cellulose microfibril orientation is an important process. The microtubule network regulates de novo synthesis of cellulose microfibrils by guiding the cellulose synthase complexes in the plasma membrane. A long-standing view is that microtubule orientation is generally aligned along the main tensile stress direction, aside from other factors (Green and King, 1966Green P.B. King A. A mechanism for the origin of specifically oriented textures in development with special reference to Nitella wall texture.Aust. J. Biol. Sci. 1966; 19: 421-438Crossref Google Scholar). Live imaging has shown that the necks and lobes create a stress pattern correlating with microtubule orientation. For example, microtubules are enriched in the neck regions with higher tensile stress. Tissue-level stress on top of the cell-shape-derived stress leads to intracellular coordination of the microtubule networks (Sampathkumar et al., 2014Sampathkumar A. Krupinski P. Wightman R. Milani P. Berquand A. Boudaoud A. Hamant O. Jonsson H. Meyerowitz E.M. Subcellular and supracellular mechanical stress prescribes cytoskeleton behavior in Arabidopsis cotyledon pavement cells.Elife. 2014; 3: e01967Crossref PubMed Google Scholar, Armour et al., 2015Armour W.J. Barton D.A. Law A.M. Overall R.L. Differential growth in periclinal and anticlinal walls during lobe formation in Arabidopsis cotyledon pavement cells.Plant Cell. 2015; 27: 2484-2500Crossref PubMed Scopus (78) Google Scholar). Microtubules in turn guide cellulose microfibril biosynthesis, and potentially other wall reinforcement (Sampathkumar et al., 2014Sampathkumar A. Krupinski P. Wightman R. Milani P. Berquand A. Boudaoud A. Hamant O. Jonsson H. Meyerowitz E.M. Subcellular and supracellular mechanical stress prescribes cytoskeleton behavior in Arabidopsis cotyledon pavement cells.Elife. 2014; 3: e01967Crossref PubMed Google Scholar), leading to a feedback loop that reinforces the cell walls parallel to the maximum tensile stress direction. The neck regions have higher tensile stress, which aligns microtubules and microtubule-guided cellulose microfibril deposition, resulting in wall reinforcement parallel to the stress direction, which further promotes neck region indentation (Figure 1A). Tissue growth requires tissue-wide polarity fields that coordinate cell polarity (Mansfield et al., 2018Mansfield C. Newman J.L. Olsson T.S.G. Hartley M. Chan J. Coen E. Ectopic BASL reveals tissue cell polarity throughout leaf development in Arabidopsis thaliana.Curr. Biol. 2018; 28: 2638-2646.e4Abstract Full Text Full Text PDF PubMed Scopus (39) Google Scholar). Because mechanical stress often encompasses several cells and even an entire tissue, it likely coordinates tissue-scale patterning. For leaf epidermal pavement cells, computational modeling predicts a supracellular stress pattern that can be inferred from the microtubule networks (Sampathkumar et al., 2014Sampathkumar A. Krupinski P. Wightman R. Milani P. Berquand A. Boudaoud A. Hamant O. Jonsson H. Meyerowitz E.M. Subcellular and supracellular mechanical stress prescribes cytoskeleton behavior in Arabidopsis cotyledon pavement cells.Elife. 2014; 3: e01967Crossref PubMed Google Scholar). At the shoot apex, the shoot apical meristem (SAM) initiates all shoot organs. Assuming the epidermis restricts inner tissues (Hamant et al., 2008Hamant O. Heisler M.G. Jönsson H. Krupinski P. Uyttewaal M. Bokov P. Corson F. Sahlin P. Boudaoud A. Meyerowitz E.M. et al.Developmental patterning by mechanical signals in Arabidopsis.Science. 2008; 322: 1650-1655Crossref PubMed Scopus (646) Google Scholar), the stress pattern is expected to be isotropic at the meristem center, around the meristem dome, and along the boundary separating lateral organs. As in pavement cells, the supracellular microtubule arrangement correlates with the predicted stress pattern (Hamant et al., 2008Hamant O. Heisler M.G. Jönsson H. Krupinski P. Uyttewaal M. Bokov P. Corson F. Sahlin P. Boudaoud A. Meyerowitz E.M. et al.Developmental patterning by mechanical signals in Arabidopsis.Science. 2008; 322: 1650-1655Crossref PubMed Scopus (646) Google Scholar). Auxin maxima precede organ initials, and auxin accumulation leads to changes in cell wall properties. On the one hand, pectin de-methylesterification is locally enhanced to reduce wall stiffness (Peaucelle et al., 2011Peaucelle A. Braybrook S.A. Le Guillou L. Bron E. Kuhlemeier C. Hofte H. Pectin-induced changes in cell wall mechanics underlie organ initiation in Arabidopsis.Curr. Biol. 2011; 21: 1720-1726Abstract Full Text Full Text PDF PubMed Scopus (423) Google Scholar). On the other hand, the otherwise anisotropic microtubule arrays are locally disorganized by auxin, which subsequently enhances wall extensibility (Sassi et al., 2014Sassi M. Ali O. Boudon F. Cloarec G. Abad U. Cellier C. Chen X. Gilles B. Milani P. Friml J. et al.An auxin-mediated shift toward growth isotropy promotes organ formation at the shoot meristem in Arabidopsis.Curr. Biol. 2014; 24: 2335-2342Abstract Full Text Full Text PDF PubMed Scopus (108) Google Scholar). Together, local changes in cell wall properties at the auxin maxima may enable lateral organ initiation. Soon after leaf initiation, the symmetry of the primordium transitions from (close to) radially symmetric to bilaterally symmetric. This shaping process is accompanied by asymmetric pectin de-methylesterification and wall stiffness changes, with the abaxial (ventral) side looser at first followed by the adaxial (dorsal) side (Qi et al., 2017Qi J. Wu B. Feng S. Lü S. Guan C. Zhang X. Qiu D. Hu Y. Zhou Y. Li C. et al.Mechanical regulation of organ asymmetry in leaves.Nat. Plants. 2017; 3: 724-733Crossref PubMed Scopus (73) Google Scholar). Auxin transport interacts with mechanical stress to coordinate tissue-scale patterning. Auxin maxima form successively at the periphery of the SAM to promote lateral organ primordia formation, thereby determining phyllotaxis. In this process, the plasma membrane-localized auxin efflux carrier PIN-FORMED1 (PIN1) is critical for auxin maxima formation. Strikingly, polarized PIN1 localization is coordinated in neighboring cells to cause directional auxin flow toward the auxin maxima. How can a cell sense and compare the auxin concentration of its neighbors with its own to orient PIN1 localization remains an open question. The distribution of PIN1 in the plasma membrane fluctuates dynamically through exocytosis and endocytosis. Higher plasma membrane tension leads to enhanced exocytosis and locally enriched PIN1 (Nakayama et al., 2012Nakayama N. Smith R.S. Mandel T. Robinson S. Kimura S. Boudaoud A. Kuhlemeier C. Mechanical regulation of auxin-mediated growth.Curr. Biol. 2012; 22: 1468-1476Abstract Full Text Full Text PDF PubMed Scopus (157) Google Scholar). Because auxin promotes wall loosening, cells with higher auxin generate local stress in the neighboring cells. Together, the above cellular processes would lead to the localization of PIN1 protein to the most highly stressed plasma membrane part, i.e., the part contacting loosened walls shared with a high auxin cell, providing an explanation for phyllotactic patterning (Heisler et al., 2010Heisler M.G. Hamant O. Krupinski P. Uyttewaal M. Ohno C. Jönsson H. Traas J. Meyerowitz E.M. Alignment between PIN1 polarity and microtubule orientation in the shoot apical meristem reveals a tight coupling between morphogenesis and auxin transport.PLoS Biol. 2010; 8: e1000516Crossref PubMed Scopus (329) Google Scholar). In short, mechanical regulation plays important roles in plants. As an emerging field, there are key questions that need to be addressed to fully understand and exploit the mechanical regulation of development and growth. We do not know how cells perceive mechanical stress, although this is an active research area and several candidates, ranging from receptor-like proteins to putative mechanosensitive channels, are proposed (Hamant and Haswell, 2017Hamant O. Haswell E.S. Life behind the wall: sensing mechanical cues in plants.BMC Biol. 2017; 15: 59Crossref PubMed Scopus (98) Google Scholar). Because mechanical stress is probably one of the most ancient types of signals, it would not be surprising if there are multiple types of mechanical sensors. In fact, microtubules, and even exocytosis complexes, may sense tensile stress, despite it may be indirect. Direct measurements of mechanical parameters, such as mechanical stress, wall plasticity, and inner cell wall elasticity, also remain challenging. However, we can calculate stress based on tissue geometry, measure epidermal wall elasticity, measure turgor pressure in limited cell types, and measure cell volume changes during growth or caused by manipulation of osmotic pressure. In this regard, the development of new methods will boost the field and our understanding of development and growth in general. My research is supported by National Natural Science Foundation of China Grants 31825002, 31430010, 31861143021, and 31861130355 and a Royal Society Newton Advanced Fellowship (award NAF\R1\180125).
What problem does this paper attempt to address?
-
Why Plants Make Puzzle Cells, and How Their Shape Emerges.
Aleksandra Sapala,Adam Runions,Anne-Lise Routier-Kierzkowska,Mainak Das Gupta,Lilan Hong,Hugo Hofhuis,Stéphane Verger,Gabriella Mosca,Chun-Biu Li,Angela Hay,Olivier Hamant,Adrienne Hk Roeder,Miltos Tsiantis,Przemyslaw Prusinkiewicz,Richard S Smith
DOI: https://doi.org/10.7554/elife.32794
IF: 7.7
2018-01-01
eLife
Abstract:The shape and function of plant cells are often highly interdependent. The puzzle-shaped cells that appear in the epidermis of many plants are a striking example of a complex cell shape, however their functional benefit has remained elusive. We propose that these intricate forms provide an effective strategy to reduce mechanical stress in the cell wall of the epidermis. When tissue-level growth is isotropic, we hypothesize that lobes emerge at the cellular level to prevent formation of large isodiametric cells that would bulge under the stress produced by turgor pressure. Data from various plant organs and species support the relationship between lobes and growth isotropy, which we test with mutants where growth direction is perturbed. Using simulation models we show that a mechanism actively regulating cellular stress plausibly reproduces the development of epidermal cell shape. Together, our results suggest that mechanical stress is a key driver of cell-shape morphogenesis.
-
Fibrous Network Nature of Plant Cell Walls Enables Tunable Mechanics for Development
Si Chen,Isabella Burda,Purvil Jani,Bex Pendrak,Meredith N. Silberstein,Adrienne H. K. Roeder
DOI: https://doi.org/10.1101/2024.10.09.617478
2024-11-24
Abstract:During plant development, the mechanical properties of the cell walls must be tuned to regulate the growth of the cells. Cell growth involves significant stretching of the cell walls, yet little is known about the mechanical properties of cell walls under such substantial deformation, or how these mechanical properties change to regulate development. Here, we investigated the mechanical behavior of the Arabidopsis leaf epidermal cells being stretched. We found that the mechanical properties arise from the cell wall, which behaves as a fibrous network material. The epidermis exhibited a non-linear stiffening behavior that fell into three regimes. Each regime corresponded to distinct nonlinear behaviors in terms of transverse deformation (i.e., Poisson effect) and unrecoverable deformation (i.e., plasticity). Using a model, we demonstrated that the transition from reorientation and bending-dominated to stretch-dominated deformation modes of cellulose microfibrils cause these nonlinear behaviors. We found the stiffening behavior is more pronounced at later developmental stages. Finally, we show the spiral2-2 mutant has anisotropic mechanical properties, likely contributing to the spiraling of leaves. Our findings reveal the fibrous network nature of cell walls gives a high degree of tunability in mechanical properties, which allows cells to adjust these properties to support proper development.
Biology
-
Mechanism for Plant Cellular Morphogenesis
Paul B. Green
DOI: https://doi.org/10.1126/science.138.3548.1404
IF: 56.9
1962-12-28
Science
Abstract:The control of the cylindrical cell form in plants appears to reside in the orientation of the reinforcing cellulose microfibrils in the side walls. In elongating cells the fibrils are typically transverse. Control of new synthesis of oriented wall texture is shown to be in turn related to the orientation of cytoplasmic elements in the cell periphery. Three properties of these cytoplasmic elements have been deduced from polarization optical properties of treated and normal cell walls. These deduced properties— namely, possession of a long axis and the ability to build microfibrils perpendicular to it, a tendency to cross-bond to make a parallel array, and a sensitivity of this alignment to colchicine—are all well-known properties of mitotic spindle and phragmoplast fibers which form the cross-wall after mitosis. It is proposed that proteins of spindle fiber nature exist in cortical cytoplasm of plant cells and are active in the control of wall texture and cell form.
multidisciplinary sciences
-
Regulation of plant cell wall stiffness by mechanical stress: a mesoscale physical model
Hadrien Oliveri,Jan Traas,Christophe Godin,Olivier Ali
DOI: https://doi.org/10.1007/s00285-018-1286-y
2018-09-12
Journal of Mathematical Biology
Abstract:A crucial question in developmental biology is how cell growth is coordinated in living tissue to generate complex and reproducible shapes. We address this issue here in plants, where stiff extracellular walls prevent cell migration and morphogenesis mostly results from growth driven by turgor pressure. How cells grow in response to pressure partly depends on the mechanical properties of their walls, which are generally heterogeneous, anisotropic and dynamic. The active control of these properties is therefore a cornerstone of plant morphogenesis. Here, we focus on wall stiffness, which is under the control of both molecular and mechanical signaling. Indeed, in plant tissues, the balance between turgor and cell wall elasticity generates a tissue-wide stress field. Within cells, mechano-sensitive structures, such as cortical microtubules, adapt their behavior accordingly and locally influence cell wall remodeling dynamics. To fully apprehend the properties of this feedback loop, modeling approaches are indispensable. To that end, several modeling tools in the form of virtual tissues have been developed. However, these models often relate mechanical stress and cell wall stiffness in relatively abstract manners, where the molecular specificities of the various actors are not fully captured. In this paper, we propose to refine this approach by including parsimonious biochemical and biomechanical properties of the main molecular actors involved. Through a coarse-grained approach and through finite element simulations, we study the role of stress-sensing microtubules on organ-scale mechanics.
mathematical & computational biology,biology
-
A continuum mechanics model of the plant cell wall reveals interplay between enzyme action and cell wall structure
Euan T. Smithers,Jingxi Luo,Rosemary J. Dyson
DOI: https://doi.org/10.1140/epje/s10189-023-00396-2
2024-01-07
The European Physical Journal E
Abstract:Plant cell growth is regulated through manipulation of the cell wall network, which consists of oriented cellulose microfibrils embedded within a ground matrix incorporating pectin and hemicellulose components. There remain many unknowns as to how this manipulation occurs. Experiments have shown that cellulose reorients in cell walls as the cell expands, while recent data suggest that growth is controlled by distinct collections of hemicellulose called biomechanical hotspots, which join the cellulose molecule together. The enzymes expansin and Cel12A have both been shown to induce growth of the cell wall; however, while Cel12A's wall-loosening action leads to a reduction in the cell wall strength, expansin's has been shown to increase the strength of the cell wall. In contrast, members of the XTH enzyme family hydrolyse hemicellulose but do not appear to cause wall creep. This experimentally observed behaviour still awaits a full explanation. We derive and analyse a mathematical model for the effective mechanical properties of the evolving cell wall network, incorporating cellulose microfibrils, which reorient with cell growth and are linked via biomechanical hotspots made up of regions of crosslinking hemicellulose. Assuming a visco-elastic response for the cell wall and using a continuum approach, we calculate the total stress resultant of the cell wall for a given overall growth rate. By changing appropriate parameters affecting breakage rate and viscous properties, we provide evidence for the biomechanical hotspot hypothesis and develop mechanistic understanding of the growth-inducing enzymes.
physics, applied,materials science, multidisciplinary,polymer science,chemistry, physical
-
Primary Cell Wall Modifying Proteins Regulate Wall Mechanics to Steer Plant Morphogenesis
Dengying Qiu,Shou-Ling Xu,Yi Wang,Ming Zhou,Lilan Hong
DOI: https://doi.org/10.3389/fpls.2021.751372
IF: 5.6
2021-01-01
Frontiers in Plant Science
Abstract:Plant morphogenesis involves multiple biochemical and physical processes inside the cell wall. With the continuous progress in biomechanics field, extensive studies have elucidated that mechanical forces may be the most direct physical signals that control the morphology of cells and organs. The extensibility of the cell wall is the main restrictive parameter of cell expansion. The control of cell wall mechanical properties largely determines plant cell morphogenesis. Here, we summarize how cell wall modifying proteins modulate the mechanical properties of cell walls and consequently influence plant morphogenesis.
-
Stress and Strain Provide Positional and Directional Cues in Development
Behruz Bozorg,Pawel Krupinski,Henrik Jönsson
DOI: https://doi.org/10.1371/journal.pcbi.1003410
2014-01-09
PLoS Computational Biology
Abstract:The morphogenesis of organs necessarily involves mechanical interactions and changes in mechanical properties of a tissue. A long standing question is how such changes are directed on a cellular scale while being coordinated at a tissular scale. Growing evidence suggests that mechanical cues are participating in the control of growth and morphogenesis during development. We introduce a mechanical model that represents the deposition of cellulose fibers in primary plant walls. In the model both the degree of material anisotropy and the anisotropy direction are regulated by stress anisotropy. We show that the finite element shell model and the simpler triangular biquadratic springs approach provide equally adequate descriptions of cell mechanics in tissue pressure simulations of the epidermis. In a growing organ, where circumferentially organized fibers act as a main controller of longitudinal growth, we show that the fiber direction can be correlated with both the maximal stress direction and the direction orthogonal to the maximal strain direction. However, when dynamic updates of the fiber direction are introduced, the mechanical stress provides a robust directional cue for the circumferential organization of the fibers, whereas the orthogonal to maximal strain model leads to an unstable situation where the fibers reorient longitudinally. Our investigation of the more complex shape and growth patterns in the shoot apical meristem where new organs are initiated shows that a stress based feedback on fiber directions is capable of reproducing the main features of in vivo cellulose fiber directions, deformations and material properties in different regions of the shoot. In particular, we show that this purely mechanical model can create radially distinct regions such that cells expand slowly and isotropically in the central zone while cells at the periphery expand more quickly and in the radial direction, which is a well established growth pattern in the meristem.
biochemical research methods,mathematical & computational biology
-
Lockhart with a twist: Modelling cellulose microfibril deposition and reorientation reveals twisting plant cell growth mechanisms
Jeevanjyoti Chakraborty,Jingxi Luo,Rosemary J Dyson,Rosemary J. Dyson
DOI: https://doi.org/10.1016/j.jtbi.2021.110736
IF: 2.405
2021-09-01
Journal of Theoretical Biology
Abstract:<p>Plant morphology emerges from cellular growth and structure. The turgor-driven diffuse growth of a cell can be highly anisotropic: significant longitudinally and negligible radially. Such anisotropy is ensured by cellulose microfibrils (CMF) reinforcing the cell wall in the hoop direction. To maintain the cell's integrity during growth, new wall material including CMF must be continually deposited. We develop a mathematical model representing the cell as a cylindrical pressure vessel and the cell wall as a fibre-reinforced viscous sheet, explicitly including the mechano-sensitive angle of CMF deposition. The model incorporates interactions between turgor, external forces, CMF reorientation during wall extension, and matrix stiffening. Using the model, we reinterpret some recent experimental findings, and reexamine the popular hypothesis of CMF/microtubule alignment. We explore how the handedness of twisting cell growth depends on external torque and intrinsic wall properties, and find that cells twist left-handedly 'by default' in some suitable sense. Overall, this study provides a unified mechanical framework for understanding left- and right-handed twist-growth as seen in many plants.</p>
biology,mathematical & computational biology
-
Mechanical forces instruct division plane orientation of cambium stem cells during radial growth in
Mathias Hofler,Xiaomin Liu,Thomas Greb,Karen Alim
DOI: https://doi.org/10.1101/2024.05.23.595483
2024-05-27
Abstract:Precise regulation of cell division is central for the formation of complex multicellular organisms and a hallmark of stem cell activity. In plants, due to the absence of cell migration, correct placement of newly produced cell walls during cell division is of eminent importance for generating functional tissues and organs. In particular, during radial growth of plant shoots and roots, concerted cell divisions in the cambium are essential to produce adjacent xylem and phloem tissues in a strictly bidirectional manner. While several intercellular signaling cascades have been identified to instruct tissue organization during radial growth, a role of mechanical forces in guiding cambium stem cell activity has been frequently proposed but, so far, not been functionally investigated on the cellular level. Here, we coupled anatomical analyses with a cell-based vertex model to analyze the role of mechanical stress in radial plant growth at the cell and tissue scale. Simulations based on segmented cellular outlines of radially growing hypocotyls revealed a distinct stress pattern with circumferential stresses in cambium stem cells which coincided with the orientation of cortical microtubules. Integrating stress patterns as a cue instructing cell division orientation was sufficient for the emergence of typical cambium-derived cell files and agreed with experimental results for stress-related tissue organization in confining mechanical environments. Our work thus underlines the significance of mechanical forces in tissue organization through self-emerging stress patterns during the growth of plant organs.
Plant Biology
-
Cortical microtubule patterning in roots of Arabidopsis thaliana primary cell wall mutants reveals the bidirectional interplay with cell expansion
Emmanuel Panteris,Ioannis-Dimosthenis S Adamakis,Gerasimos Daras,Stamatis Rigas
DOI: https://doi.org/10.1080/15592324.2015.1028701
Abstract:Cell elongation requires directional deposition of cellulose microfibrils regulated by transverse cortical microtubules. Microtubules respond differentially to suppression of cell elongation along the developmental zones of Arabidopsis thaliana root apex. Cortical microtubule orientation is particularly affected in the fast elongation zone but not in the meristematic or transition zones of thanatos and pom2-4 cellulose-deficient mutants of Arabidopsis thaliana. Here, we report that a uniform phenotype is established among the primary cell wall mutants, as cortical microtubules of root epidermal cells of rsw1 and prc1 mutants exhibit the same pattern described in thanatos and pom2-4. Whether cortical microtubules assume transverse orientation or not is determined by the demand for cellulose synthesis, according to each root zone's expansion rate. It is suggested that cessation of cell expansion may provide a biophysical signal resulting in microtubule reorientation.
-
Dynamic Structural Change of Plant Epidermal Cell Walls under Strain
Jingyi Yu,Joshua T. Del Mundo,Guillaume Freychet,Mikhail Zhernenkov,Eric Schaible,Esther W. Gomez,Enrique D. Gomez,Daniel J. Cosgrove
DOI: https://doi.org/10.1002/smll.202311832
IF: 13.3
2024-02-23
Small
Abstract:Plant epidermal cell walls bear increasing loads even after plastic deformation. The multiscale structural characterization of walls under strain reveals realignment of cellulose networks, close packing of cellulose microfibrils and the stretching of cellulose backbones, suggesting that the molecular crowding of cellulose upon sliding may enable further stretching of celluloses for the wall to bear higher loads. The molecular foundations of epidermal cell wall mechanics are critical for understanding structure–function relationships of primary cell walls in plants and facilitating the design of bioinspired materials. To uncover the molecular mechanisms regulating the high extensibility and strength of the cell wall, the onion epidermal wall is stretched uniaxially to various strains and cell wall structures from mesoscale to atomic scale are characterized. Upon longitudinal stretching to high strain, epidermal walls contract in the transverse direction, resulting in a reduced area. Atomic force microscopy shows that cellulose microfibrils exhibit orientation‐dependent rearrangements at high strains: longitudinal microfibrils are straightened out and become highly ordered, while transverse microfibrils curve and kink. Small‐angle X‐ray scattering detects a 7.4 nm spacing aligned along the stretch direction at high strain, which is attributed to distances between individual cellulose microfibrils. Furthermore, wide‐angle X‐ray scattering reveals a widening of (004) lattice spacing and contraction of (200) lattice spacing in longitudinally aligned cellulose microfibrils at high strain, which implies longitudinal stretching of the cellulose crystal. These findings provide molecular insights into the ability of the wall to bear additional load after yielding: the aggregation of longitudinal microfibrils impedes sliding and enables further stretching of the cellulose to bear increased loads.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
-
Matrix polysaccharides affect preferred orientation of cellulose crystals in primary cell walls
Sintu Rongpipi,William J. Barnes,Oskar Siemianowski,Dan Ye,Joshua T. Del Mundo,Sydney Duncombe,Xiaoran Xin,Chenhui Zhu,Michael F. Toney,Ying Gu,Charles T. Anderson,Enrique D. Gomez,Esther W. Gomez
DOI: https://doi.org/10.1007/s10570-023-05702-x
IF: 6.123
2024-01-10
Cellulose
Abstract:The spatial organization and interactions of constituent components influence cell growth and determine physical and chemical properties of the cell wall, including its rigidity, flexibility, and degradability. Elucidating the interactions between cell wall polysaccharides is crucial for advancing our knowledge of how cell walls are assembled and for designing approaches to efficiently break down cell walls to produce renewable energy and biomaterials. Here, we investigated the effect of defects in the biosynthesis of cell wall components on the nanoscale organization of cellulose in primary cell walls through grazing incidence wide angle X-ray scattering (GIWAXS) measurements of hypocotyls of wild type Arabidopsis thaliana and of cellulose, pectin, and xyloglucan (hemicellulose) deficient mutants. GIWAXS reveals changes in lattice spacings, coherence lengths, and relative crystalline content for cellulose between wild type and mutant plants. In addition, X-ray pole figures constructed using GIWAXS and X-ray diffraction (XRD) rocking scans quantify an emerging measure of cellulose organization, the degree of preferred orientation (texture) of cellulose crystals with respect to the cell wall plane. Comparing X-ray pole figures from pectin-deficient and xyloglucan-deficient mutants to that of wild type plants reveals that cellulose texture is disrupted in pectin-deficient mutants, but not in xyloglucan mutants. Our results indicate that a deficiency of pectin during cell wall biosynthesis alters cellulose organization in plant cell walls.
materials science, textiles,polymer science, paper & wood
-
Responses of Chrysanthemum Cells to Mechanical Stimulation Require Intact Microtubules and Plasma Membrane–Cell Wall Adhesion
Jing Zhou,Bochu Wang,Yi Li,Yichuan Wang,Liqing Zhu
DOI: https://doi.org/10.1007/s00344-006-0029-2
IF: 4.8
2007-01-01
Journal of Plant Growth Regulation
Abstract:Plant cells are highly susceptible and receptive to physical factors, both in nature and under experimental conditions. Exposure to mechanical forces dramatically results in morphological and microstructural alterations in their growth. In the present study, cells from chrysanthemum ( Dendranthema morifolium ) were subjected to constant pressure from an agarose matrix, which surrounded and immobilized the cells to form a cell-gel block. Cells in the mechanically loaded blocks elongated and divided, with an axis preferentially perpendicular to the direction of principal stress vectors. After a sucrose-induced plasmolysis, application of peptides containing an RGD motif, which interferes with plasma membrane-cell wall adhesion, reduced the oriented growth under stress conditions. Moreover, colchicines, but not cytochalasin B, abolished the effects of mechanical stress on cell morphology. Cellulose staining revealed that mechanical force reinforces the architecture of cell walls and application of mechanical force, and RGD peptides caused aggregative staining on the surface of plasmolyzed protoplasts. These results provide evidence that the oriented cell growth in response to compressive stress requires the maintenance of plasmalemma-cell wall adhesion and intact microtubules. Stress-triggered wall development in individual plant cells was also demonstrated.
-
Pectin methylesterification state and cell wall mechanical properties contribute to neighbor proximity‐induced hypocotyl growth in Arabidopsis
Fabien Sénéchal,Sarah Robinson,Evert Van Schaik,Martine Trévisan,Prashant Saxena,Didier Reinhardt,Christian Fankhauser
DOI: https://doi.org/10.1002/pld3.584
2024-04-23
Plant Direct
Abstract:Plants growing with neighbors compete for light and consequently increase the growth of their vegetative organs to enhance access to sunlight. This response, called shade avoidance syndrome (SAS), involves photoreceptors such as phytochromes as well as phytochrome interacting factors (PIFs), which regulate the expression of growth‐mediating genes. Numerous cell wall‐related genes belong to the putative targets of PIFs, and the importance of cell wall modifications for enabling growth was extensively shown in developmental models such as dark‐grown hypocotyl. However, the contribution of the cell wall in the growth of de‐etiolated seedlings regulated by shade cues remains poorly established. Through analyses of mechanical and biochemical properties of the cell wall coupled with transcriptomic analysis of cell wall‐related genes from previously published data, we provide evidence suggesting that cell wall modifications are important for neighbor proximity‐induced elongation. Further analysis using loss‐of‐function mutants impaired in the synthesis and remodeling of the main cell wall polymers corroborated this. We focused on the cgr2cgr3 double mutant that is defective in methylesterification of homogalacturonan (HG)‐type pectins. By following hypocotyl growth kinetically and spatially and analyzing the mechanical and biochemical properties of cell walls, we found that methylesterification of HG‐type pectins was required to enable global cell wall modifications underlying neighbor proximity‐induced hypocotyl growth. Collectively, our work suggests that plant competition for light induces changes in the expression of numerous cell wall genes to enable modifications in biochemical and mechanical properties of cell walls that contribute to neighbor proximity‐induced growth.
plant sciences
-
Microtubule nucleation complex behavior is critical for cortical array homogeneity and xylem wall patterning
Bas Jacobs,René Schneider,Jaap Molenaar,Laura Filion,Eva E Deinum
DOI: https://doi.org/10.1073/pnas.2203900119
2022-12-13
Abstract:Plant cell walls are versatile materials that can adopt a wide range of mechanical properties through controlled deposition of cellulose fibrils. Wall integrity requires a sufficiently homogeneous fibril distribution to cope effectively with wall stresses. Additionally, specific conditions, such as the negative pressure in water transporting xylem vessels, may require more complex wall patterns, e.g., bands in protoxylem. The orientation and patterning of cellulose fibrils are guided by dynamic cortical microtubules. New microtubules are predominantly nucleated from parent microtubules causing positive feedback on local microtubule density with the potential to yield highly inhomogeneous patterns. Inhomogeneity indeed appears in all current cortical array simulations that include microtubule-based nucleation, suggesting that plant cells must possess an as-yet unknown balancing mechanism to prevent it. Here, in a combined simulation and experimental approach, we show that a limited local recruitment of nucleation complexes to microtubules can counter the positive feedback, whereas local tubulin depletion cannot. We observe that nucleation complexes preferentially appear at the plasma membrane near microtubules. By incorporating our experimental findings in stochastic simulations, we find that the spatial behavior of nucleation complexes delicately balances the positive feedback, such that differences in local microtubule dynamics-as in developing protoxylem-can quickly turn a homogeneous array into a banded one. Our results provide insight into how the plant cytoskeleton has evolved to meet diverse mechanical requirements and greatly increase the predictive power of computational cell biology studies.
-
Growth directions and stiffness across cell layers determine whether tissues stay smooth or buckle
Avilash S. Yadav,Lilan Hong,Patrick M. Klees,Annamaria Kiss,Manuel Petit,Xi He,Iselle M. Barrios,Michelle Heeney,Anabella Maria D. Galang,Richard S. Smith,Arezki Boudaoud,Adrienne H.K. Roeder
DOI: https://doi.org/10.1101/2023.07.22.549953
2024-04-08
Abstract:From smooth to buckled, nature exhibits organs of various shapes and forms. How cellular growth patterns produce smooth organ shapes such as leaves and sepals remains unclear. Here we show that unidirectional growth and comparable stiffness across both epidermal layers of Arabidopsis sepals are essential for smoothness. We identified a mutant with ectopic ( ) expression on the outer epidermis. Our analysis reveals that ectopic expression causes outer epidermal buckling at early stages of sepal development, due to conflicting growth directions and unequal epidermal stiffnesses. Aligning growth direction and increasing stiffness of the outer epidermis restores smoothness. Furthermore, buckling influences auxin efflux transporter protein PIN-FORMED 1 polarity to generate outgrowth in the later stages, suggesting that buckling is sufficient to initiate outgrowths. Our findings suggest that in addition to molecular cues influencing tissue mechanics, tissue mechanics can also modulate molecular signals, giving rise to well-defined shapes.
Developmental Biology
-
Secondary cell wall patterning-connecting the dots, pits and helices
Huizhen Xu,Alessandro Giannetti,Yuki Sugiyama,Wenna Zheng,René Schneider,Yoichiro Watanabe,Yoshihisa Oda,Staffan Persson
DOI: https://doi.org/10.1098/rsob.210208
Abstract:All plant cells are encased in primary cell walls that determine plant morphology, but also protect the cells against the environment. Certain cells also produce a secondary wall that supports mechanically demanding processes, such as maintaining plant body stature and water transport inside plants. Both these walls are primarily composed of polysaccharides that are arranged in certain patterns to support cell functions. A key requisite for patterned cell walls is the arrangement of cortical microtubules that may direct the delivery of wall polymers and/or cell wall producing enzymes to certain plasma membrane locations. Microtubules also steer the synthesis of cellulose-the load-bearing structure in cell walls-at the plasma membrane. The organization and behaviour of the microtubule array are thus of fundamental importance to cell wall patterns. These aspects are controlled by the coordinated effort of small GTPases that probably coordinate a Turing's reaction-diffusion mechanism to drive microtubule patterns. Here, we give an overview on how wall patterns form in the water-transporting xylem vessels of plants. We discuss systems that have been used to dissect mechanisms that underpin the xylem wall patterns, emphasizing the VND6 and VND7 inducible systems, and outline challenges that lay ahead in this field.
-
A mechanically sensitive cell layer regulates the physical properties of the Arabidopsis seed coat
Audrey Creff,Lysiane Brocard,Gwyneth Ingram
DOI: https://doi.org/10.1038/ncomms7382
2015-02-23
Abstract:Endogenous mechanical stresses regulate plant growth and development. Tensile stress in epidermal cells affects microtubule reorientation and anisotropic cell wall deposition, and mechanical stimulus at the meristem regulates trafficking and polar localization of auxin transporters. However, the mechanical regulation of other plant growth regulators has not been demonstrated. Here we propose that during seed growth, mechanical stress exerted by the expanding embryo and endosperm is perceived by a specific mechanosensitive cell layer in the seed coat. We show that the adaxial epidermis of the outer integument thickens its cell wall in a mechanosensitive fashion, demonstrates microtubule dynamics consistent with mechanical stress perception and shows mechanosensitive expression of ELA1, a regulator of seed size and gibberellic acid (GA) metabolism. By exploiting physical and genetic compartmentalization, and combining genetic and surgical techniques, we propose a mechanistic link between mechanical stress and GA accumulation that regulates seed development.
-
Wall to membrane linkers, stretch activated channels, and the detection of tension, voltage, temperature, auxin, and pH
B G Pickard
Abstract:Introduction. The higher plant is a heterogeneous, mechanically prestressed structure continually subject to shifting forces. When a cell grows in a plant at gravitropic equilibrium, it must create localized maxima of shear in walls of neighboring cells. Such mechanical stress and strain are likely detected in a variety of ways. However, tension-sensitive ion channels are of particular interest because it appears that they are elaborately evolved for sensory function. We hypothesize that 1) the patchy patterns of high shear are focused via wall-to-membrane linkers onto the plasma membrane, where 2) they are translated by mechanosensory cation channels into corresponding patterns of high cytosolic Ca2+, which 3) initiate local enhancement of wall expansion. Further, we hypothesize that the local promotion of enhancement is achieved at least in part by local intensification of auxin transport across the plasma membrane. By implication, when an organ is asymmetrically pressed, rubbed, or bent or when it is displaced in the gravitational field, the net asymmetry of shear stress occurring across the organ would lead to asymmetric redistribution of auxin and corrective asymmetric growth. We shall describe a representative mechanosensitive Ca(2+) -selective cation channel (MCaC) with susceptibilities to xenobiotics implicating it as a force transducer in thigmo- and gravitropism. Then, we shall consider whether a putative wall-to-membrane linker (WML) could be a key feature of the molecular architecture permitting the stress distributed in the wall system to be focused on the channels.
-
Anisotropic Cell Expansion Is Affected through the Bidirectional Mobility of Cellulose Synthase Complexes and Phosphorylation at Two Critical Residues on CESA3
Shaolin Chen,Honglei Jia,Heyu Zhao,Dan Liu,Yanmei Liu,Boyang Liu,Stefan Bauer,Chris R Somerville
DOI: https://doi.org/10.1104/pp.15.01874
Abstract:Here we report that phosphorylation status of S211 and T212 of the CESA3 component of Arabidopsis (Arabidopsis thaliana) cellulose synthase impacts the regulation of anisotropic cell expansion as well as cellulose synthesis and deposition and microtubule-dependent bidirectional mobility of CESA complexes. Mutation of S211 to Ala caused a significant decrease in the length of etiolated hypocotyls and primary roots, while root hairs were not significantly affected. By contrast, the S211E mutation stunted the growth of root hairs, but primary roots were not significantly affected. Similarly, T212E caused a decrease in the length of root hairs but not root length. However, T212E stunted the growth of etiolated hypocotyls. Live-cell imaging of fluorescently labeled CESA showed that the rate of movement of CESA particles was directionally asymmetric in etiolated hypocotyls of S211A and T212E mutants, while similar bidirectional velocities were observed with the wild-type control and S211E and T212A mutant lines. Analysis of cell wall composition and the innermost layer of cell wall suggests a role for phosphorylation of CESA3 S211 and T212 in cellulose aggregation into fibrillar bundles. These results suggest that microtubule-guided bidirectional mobility of CESA complexes is fine-tuned by phosphorylation of CESA3 S211 and T212, which may, in turn, modulate cellulose synthesis and organization, resulting in or contributing to the observed defects of anisotropic cell expansion.