Abstract:Abstract. The site amplification factor was usually considered to be scalar values, such as amplification of peak ground acceleration or peak ground velocity, or increments of seismic intensity in the earthquake early warning (EEW) system or seismic-intensity repaid report system. This paper focuses on evaluating an infinite impulse recursive filter method that could produce frequency-dependent site amplification and compare the performance of the scalar-value method with the infinite impulse recursive filter method. A large number of strong motion data of IBRH10 and IBRH19 of the Kiban Kyoshin network (KiK-net) triggered in more than 1000 earthquakes from 2004 to 2012 were selected carefully and used to obtain the relative site amplification ratio; we model the relative site amplification factor with a casual filter. Then we make a simulation from the borehole to the surface and also simulate from the front-detection station to the far-field station. Compared to different simulation cases, it can easily be found that this method could produce different amplification factors for different earthquakes and could reflect the frequency-dependent nature of site amplification. Through these simulations between two stations, we can find that the frequency-dependent correction for site amplification shows better performance than the amplification factor relative to velocity (ARV) method and station correction method. It also shows better performance than the average level and the highest level of the Japan Meteorological Agency (JMA) earthquake early warning system in ground motion prediction. Some cases in which simulation did not work very well were also found; possible reasons and problems were analyzed and addressed. This method pays attention to the amplitude and ignores the phase characteristics; this problem may be improved by the seismic-interferometry method. Frequency-dependent correction for site amplification in the time domain highly improves the accuracy of predicting ground motion in real time.

A Modified Frequency-Dependent Equivalent Linear Method for Seismic Site Response Analyses and Model Validation Using KiK-Net Borehole Arrays

Stochastic Finite‐Fault Simulation of the Ms 7.0 Lushan Earthquake Based on Frequency‐ and Distance‐Dependent Radiation Patterns

A New Hybrid Equivalent Modeling Method of Low-Frequency Radiation Source Based on GS and JADE Algorithms and Phaseless Near-Field Data

Oscillatory Responses of a Spatially Random Seabed in the Vicinity of Structures: Validation and Application of the Integrated CFD-SFEM

Re-evaluation of One-Dimensional Site Response Methods Using Vs Adjusted Borehole Arrays

SEISMIC-FORCE-MODIFICATION FACTOR FOR STRUCTURES WITH BILINEAR ELASTOPLASTIC MODEL

Numerical Simulation For Site Seismic Response Of Centrifuge Model Test Considering Effect Of Additional Attenuation Of G(Max)

Study on real-time correction of site amplification factor

A new simple masing-type soil nonlinear model considering modified damping and its application on KiK-net site response

Simplified Method for Evaluating the Response of Existing Tunnel Induced by Adjacent Excavation

A Complex-Network-based Estimation of the Representative Elementary Volume and Equivalent Permeability Coefficient for Fractured Rock Masses

A new effective stress method for nonlinear site response analyses

Multiscale Method for Seismic Response of Near-Source Sites

Improved Approach for Modeling Nonlinear Site Response of Highly Strained Soils: Case Study of the Service Hall Array in Japan

A Seismic Free Field Input Model for FE-SBFE Coupling in Time Domain

Nonlinear Spectral‐Element Method for 3D Seismic‐Wave Propagation

Subsurface attenuation estimation using a novel hybrid method based on FWE function and power spectrum

Bandwidth-insensitive Extended Centroid Frequency Shift Method for Near-Surface Q Estimation

Seismic Response Analysis of Soil–structure Interactive System Using a Coupled Three-Dimensional FE–IE Method

A Two-Layer Network Equivalent with Local Passivity Compensation with Applications to Hybrid Simulations of MMC-Based AC–DC Grids

A finite-element algorithm with a perfectly matched layer boundary condition for seismic modelling in a diffusive-viscous medium