Abstract:Na3V2(PO4)2F3 3 V 2 (PO 4 ) 2 F 3 (NVPF) is shown to be an attractive cathode material for sodium storage due to its high theoretical capacity and suitable working voltage. However, its low electronic conductivity and poor cycling stability have to be addressed in order for enhanced high-rate performance and cycle life. Herein, we have prepared a 3D reduced graphene oxide (rGO) host-supported NVPF nanocuboids. We discover that polyvinyl alcohol (PVA) serves as an important structural directing agent that bridges between NVPF and rGO through the hydrogen bonding, and thus regulates the formation of the 3D rGO framework with NVPF nanocuboids embedded inside (NVPF@C@rGO). With such a unique construction, NVPF@C@rGO exhibits excellent cycling stability and rate performance for sodium storage, showing high reversible capacities of 121 mAh/g and 113 mAh/g at 1C and 10C, respectively, and 103 mAh/g after 700 cycles at 50C with 98.3% retention. Even at an extremely high current of 100C, it also delivers a reversible capacity of 64 mAh/g, surpassing the performance of many recently reported NVPF-based electrodes. Cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT) data confirm the much better kinetic properties of NVPF@C@rGO electrode than the control samples of NVPF@rGO and pure NVPF. In-situ XRD results reveal that the 3D rGO housing can effectively suppress the lattice variation of NVPF, with a maximum volume change of only 1.84% during cycling. Moreover, the in-situ temperature sensing reveals the more stable working temperature of NVPF@C@rGO compared to phase-pure NVPF, suggesting a higher temperature safety of the electrode. Using NVPF@C@rGO as the positive electrode and commercial hard carbon as the negative electrode, a sodium-ion full battery has been assembled with about 110 mAh/g at 1C for 300 cycles, corresponding to an energy density of 291 Wh kg-1 . The construction of 3D rGO housing as a conductive support offers an effective strategy for high-rate, long cycle life and high safety sodium-ion battery cathodes. (c) 2024 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights are reserved, including those for text and data mining, AI training, and similar technologies.

Reduced Graphene Oxide Wrapped Alluaudite Na2+2xFe2-x(SO4)3 with High Rate Sodium Ion Storage Properties

Na2Fe(SO4)(2): an anhydrous 3.6 V, low-cost and good-safety cathode for a rechargeable sodium-ion battery

A High Voltage Cathode of Na2+2xFe2−x(SO4)3intensively Protected by Nitrogen-Doped Graphene with Improved Electrochemical Performance of Sodium Storage

Ultrafast and Ultrastable High Voltage Cathode of Na2+2xFe2-x(SO4)(3) Microsphere Scaffolded by Graphene for Sodium Ion Batteries

A novel Na8Fe5(SO4)9@rGO cathode material with high rate capability and ultra-long lifespan for low-cost sodium-ion batteries

A Green and Scalable Synthesis of Na 3 Fe 2 (PO 4 )P 2 O 7 /rGO Cathode for High‐Rate and Long‐Life Sodium‐Ion Batteries

Ultrafine Tin Oxide on Reduced Graphene Oxide As High-Performance Anode for Sodium-Ion Batteries

Assembly of Na3V2(PO4)2F3@C nanoparticles in reduced graphene oxide enabling superior Na+ storage for symmetric sodium batteries

Reduced Graphene Oxide-Wrapped FeS2 Composite as Anode for High-Performance Sodium-Ion Batteries

A Few-Layer Sns2/Reduced Graphene Oxide Sandwich Hybrid for Efficient Sodium Storage

Epitaxial Nucleation of NaxFeFe(CN)6@rGO with Improved Lattice Regularity as Ultrahigh‐Rate Cathode for Sodium‐Ion Batteries

Sponge-like NaFe 2 PO 4 (SO 4 ) 2 @rGO as a high-performance cathode material for sodium-ion batteries

Fast and durable high-capacity Na3V2(PO4)2F2O/rGO by in-situ composite of a small amount of rGO

Layer‐by‐Layer Na3V2(PO4)3 Embedded in Reduced Graphene Oxide As Superior Rate and Ultralong‐Life Sodium‐Ion Battery Cathode

Porous NiS2 Nanosheets Anchored on Reduced Graphene Oxide As High-Rate and Long-Life Anode Materials for Sodium-Ion Batteries

Few‐Layered SnS2 on Few‐Layered Reduced Graphene Oxide As Na‐Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability

In situ redox reaction induced firmly anchoring of Na3V2(PO4)2F3 on reduced graphene oxide & carbon nanosheets as cathodes for high stable sodium-ion batteries

Ultrasmall TiO2-Coated Reduced Graphene Oxide Composite As a High-Rate and Long-Cycle-Life Anode Material for Sodium-Ion Batteries.

PVA-regulated Construction of 3D Rgo-Hosted Na3V2(PO4)2F3 for Fast and Stable Sodium Storage

Promoting Highly Reversible Sodium Storage of Iron Sulfide Hollow Polyhedrons via Cobalt Incorporation and Graphene Wrapping

High‐Stability of Heterostructured Bi2S3/VS4/rGO Anode Enabled by Electrolyte Optimization for Fast‐Charging Sodium‐Ion Batteries