Abstract:Based on the excellent performance of porous media and the popularity of additive manufacturing technology, gradient porous media with unique properties are gradually applied in the increasing fields. In this paper, the flow and heat transfer characteristics for fully developed flow in a tube partially filled with gradient porous media are investigated by numerical simulation, where the pore-size (dp) and porosity (ε) vary linearly along the radius. Keeping average pore-size dpa=0.007m and average porosity εa=0.875, the comparison of four configurations, classified by the pore-size and porosity distributions in the radial direction, is performed to investigate the difference in flow and heat transfer performance. Subsequently, the parametric analysis under the different filling ratios is conducted to learn the combined effect of the gradients of porosity and pore-size. The results show that the configurations with pore-size decreasing in radial direction have a better heat transfer performance where the effect of porosity arrangement on the flow and heat transfer can be neglected. As the filling ratio increasing, the performance is more sensitive to the variation of the gradients. Furthermore, a multi-objective genetic optimization coupled Kriging surrogate model is conducted with the consideration of maximum Nusselt number Nu and minimum friction factor f as objectives. The distribution of design variables corresponding to the optimal configurations is obtained by weighing two optimization objectives. The optimal results show that the flow resistance can be reduced by up to 19.573%, and the heat transfer efficiency can be increased by up to 7.088% compared with the homogeneous porous media under the filling ratio rd=0.7.

Forced Convective Heat Transfer of Tubes Sintered with Partially-Filled Gradient Metal Foams (gmfs) Considering Local Thermal Non-Equilibrium Effect

Numerical Investigation on Forced Convection of Tubes Partially Filled with Composite Metal Foams under Local Thermal Non-Equilibrium Condition

Numerical Simulation Of Non-Equilibrium Conjugate Heat Transfer In Tubes Partially Filled With Metallic Foams

Magneto-Thermo-Elastic Theoretical Solution for Functionally Graded Thick-Walled Tube under Magnetic, Thermal and Mechanical Loads Based on Voigt Method

Analytical solution of forced convective heat transfer in tubes partially filled with metallic foam using the two-equation model

Thermal-hydraulic and Thermodynamic Performance of Parabolic Trough Solar Receiver Partially Fi Lled with Gradient Metal Foam

Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials

Pore-scale Simulation of Forced Convection Heat Transfer in Metal Foams with Uniform and Gradient Structures

Performance Evaluation on the Gradient Design of Pore Parameters for Metal Foam and Pin Fin-Metal Foam Hybrid Structure

Fully developed forced convective heat transfer in an annulus partially filled with metallic foams: An analytical solution

Performance analysis and multi-objective optimization for tubes partially filled with gradient porous media

Numerical Modelling of Flow Boiling Heat Transfer in Horizontal Metal‐Foam Tubes

LATTICE BOLTZMANN MODELING ON FORCED CONVECTIVE HEAT TRANSFER OF NANOFLUIDS IN HIGHLY CONDUCTIVE FOAM METALS WITH LOCAL THERMAL NONEQUILIBRIUM (LTNE) EFFECT

Thermal modeling of forced convection in a parallel-plate channel partially filled with metallic foams

Experimental Investigation on Pressure Drop and Heat Transfer in Metal Foam Filled Tubes under Convective Boundary Condition

Analytical Considerations of Flow/thermal Coupling of Nanofluids in Foam Metals with Local Thermal Non-Equilibrium (LTNE) Phenomena and Inhomogeneous Nanoparticle Distribution

Analytical Considerations of Flow Boiling Heat Transfer in Metal-Foam Filled Tubes

Experimental Investigation on Heat Transfer Phenomenon in Metal Foam Filled Tubes

Analytical considerations of local thermal non-equilibrium conditions for thermal transport in metal foams

Conjugated natural convection in horizontal annuli partially filled with metallic foams by using two-equation model

Modeling Of Heat Transfer, Fluid Flow And Solute Diffusion In The Plasma Deposition Manufacturing Functionally Gradient Materials