MILD combustion of a premixed NH3/air jet flame in hot coflow versus its CH4/air counterpart
Guochang Wang,Xiangtao Liu,Pengfei Li,Guodong Shi,Xiao Cai,Zhaohui Liu,Jianchun Mi
DOI: https://doi.org/10.1016/j.fuel.2023.129523
IF: 7.4
2024-01-01
Fuel
Abstract:Moderate or intense low-oxygen dilution (MILD) combustion is suitable for solving the problems of unstable flames and high NO x emissions (E NO x ) of ammonia fuels; however, studies on this are rare. This paper numerically investigates the MILD combustion characteristics of a premixed NH3/air jet flame in hot coflow (JHC) under different jet equivalence ratios (Φ J), coflow temperatures (T C), and oxygen levels (X O2,C). For comparison, similar CH4/air MILD-JHC flame characteristics are calculated. The results show that the NH3 flame generally has a lower temperature increase and heat release, as well as a larger reaction zone, than CH4. This suggests that the NH3 flame can develop into a MILD regime more easily than CH4. E NO x of the NH3 flame is two orders of magnitude higher than that of CH4 flame at all T C and X O2,C values for Φ J < 1. At Φ J > 1, E NO x of the NH3 flame rapidly decreases to nearly zero, but unburned NH3 emissions (E NH3) and H2 emissions (E H2) are significantly high (∼1000 ppm) and the combustion efficiency is low. Moreover, E NO x increases rapidly (gradually) with X O2,C (T C), whereas E NH3 and E H2 are considerably low at T C ≥ 1300 K and X O2,C ≥ 1% for the NH3 flame. E NO x primarily originates from NO; however, N2O is also important at low Φ J and T C values. Therefore, considering E NO x , E NH3, E H2 and the burning efficiency, the optimal conditions for NH3 MILD combustion are Φ J = 1, T C ≥ 1500 K, and X O2,C = 1%–3%. In addition, compared with conventional flames, NH3 MILD combustion can reduce E NO x by one to two orders of magnitude.
energy & fuels,engineering, chemical