Abstract:The surface temperature retrieval of high-temperature objects shielded by strong diffusive mist plays a critical role in aerospace, metallurgical and many other industries. Traditional radiation temperature measurements under extreme conditions usually cause substantial errors because of the strong extinction and scattering by mist during light propagation. The current infrared temperature retrieval methods often use single-channel or double-channel non-imaging temperature measurement strategies. In such methods, the temperature is corrected using either pre-measured or real-time mist parameters, and the results are analyzed and evaluated according to radiative transfer theory. Based on the calculated spectral radiation characteristics of mist, this paper proposed an infrared imaging temperature measurement method. A temperature retrieval model is also built based on radiative transfer theory while the adjacent effect is considered. The exact surface temperature distribution can be retrieved while the parameters of the diffusive mist medium remain unknown. During a typical temperature retrieval process, the radiative temperature distribution is firstly calculated according to the infrared images in three different channels calibrated by the pre-acquired calibration and emissivity data. Then the exact temperature is retrieved according to this non-linear temperature retrieval model. A three-channel infrared temperature retrieval system is designed, with its three channels centered at 8.8, 10.7, and 12.0 mu m, respectively. Three identical long-wave infrared focal plane detector is applied, which can simultaneously photograph the high-temperature object. Besides, an experimental verification device is assembled to test the performance of the three-channel infrared system based on a high-temperature blackbody and a home-made mist generator. The results prove that long-wave infrared shows a higher interference resistance capacity than mid-wave infrared. This three-channel device and the temperature retrieval model reduce the image distortion caused by mist and show an average temperature retrieval error of ca. 7% at 1 000, 1 100, and 1 200 degrees C conditions. This method is suitable for both high-temperature blackbody and graybody, while the pre-acquisition of the mist parameters is not required. The temperature retrieval method based on multi-spectral infrared imaging proposed in this article shows universal applicability and considerable innovativeness.

Modeling the Occlusion Problem in Thermal Imaging to Allow Seeing Through Mist and Foliage.

Illusion Thermotics

Depth-based removal of thermal reflection with the light-field theory

Multi-sensor Spatial Augmented Reality for Visualizing the Invisible Thermal Information of 3D Objects

Computational Ghost Imaging in Smoke Media

Depth and Thermal Sensor Fusion to Enhance 3D Thermographic Reconstruction

Real-Time Walthrough Of Infrared Scene

Real-Time walkthrough system of large-scale infrared dynamic scene

Defogging Kinect: Simultaneous Estimation of Object Region and Depth in Foggy Scenes

Towards Real-Time Through-Obstacle Imaging Based on Compressed Sensing for Sparse Objects

Real-Time Generation of Dynamic Infrared Scene

Rapidly Developing Human Heat Residue Model under Various Conditions Based on Fluent and Thermal Video

Retrieval of High-Temperature Field under Strong Diffusive Mist Medium Via Multi-Spectral Infrared Imaging

Seeing Around Obstacles with Terahertz Waves

Harnessing Optical Imaging Limit through Atmospheric Scattering Media

AUTOMATIC TEXTURE MAPPING METHOD FOR 3D MODELS TO CIRCUMVENT OCCLUSION THROUGH 3D SPATIAL THROUGH-VIEW RELATIONSHIPS BETWEEN IMAGES,MODELS, AND POINT CLOUDS

Fusion of Infrared Thermal Image and Visible Image for 3D Thermal Model Reconstruction Using Smartphone Sensors

Modeling and Detection of Heat Haze in Computer Vision Based Displacement Measurement

Occluded Imaging with Time-of-Flight Sensors

Seeing Through Obstructions with Diffractive Cloaking