Abstract:Thermal and non-thermal plasma processes have been considered as potential methods for continuous gas synthesis of graphene in recent years. A novel approach for the preparation of few-layer graphene nano-flakes (GNFs) is presented in this work. The GNFs are continuously synthesized by non-thermal decomposition of hydrocarbons using a magnetically rotating arc at atmospheric pressure. The products are characterized by transmission electron microscopy (TEM), Raman spectrum, BET measurements and X-ray photoelectron spectroscopy (XPS). The effects of arc current, feedstock gas type, feedstock gas flow rate, C/H mole ratio and buffer gas type on the morphologies and microstructures of pyrolysis products are investigated and discussed. Results show that low power, low carbon concentration and high hydrogen concentration are considered the essential condition for the formation of GNFs. The synthesized GNFs are agglomerative flakes, where each flake is between 50 and 300 nm. Material analyses indicate that the GNFs have excellent properties such as a good crystalline structure, a high purity, a low number of layers, and a large specific surface area. Such characteristics suggest that the GNFs could be applied in fuel cells and energy storages. Building on the above results, a possible nucleation mechanism of graphene is proposed. On the one hand, low concentration of graphene nucleating precursor-polycyclic aromatic hydrocarbons (PAHs), is a necessary condition for the formation of GNFs. A process of slow rate of nucleation and rapid surface growth may occur during the GNFs formation[1]. On the other hand, low C/H mole ratio can form mass activated hydrogen atoms which terminate dangling bonds at edge of graphene and prevent the bending of carbon, that promotes the formation of GNFs[2]. Compared with GNFs prepared in other non-thermal plasmas, this method has a lower energy cost (<0.3 kWh/g ) and no pollution while guaranteeing the quality of GNFs. It is anticipated that the method developed in this paper will be highly advantageous for the mass and continuous productions of GNFs. Additionally, the morphologies and microstructures of final products can be adjusted easily by controlling the operating parameters. Figure 1 Schematic diagram of the experimental apparatus

A New Method for Few-Layer Graphene Preparation Via Plasma-Assisted Ball Milling

High-Yield Production of Few-Layer Graphene via New-fashioned Strategy Combining Resonance Ball Milling and Hydrothermal Exfoliation

Efficient preparation and characterization of graphene based on ball milling

Facile synthesis of Ge@FLG composites by plasma assisted ball milling for lithium ion battery anodes

Study on Preparation and Characterization of Graphene Based on Ball Milling Method

Facile synthesis of black phosphorene via a low melting media assisted ball milling

Preparation of Few-Layer Porous Graphene by a Soft Mechanical Method with a Short Rolling Transfer Process

Simple and low‐cost preparation of functionalised graphene by microwave expansion combined with ball milling grafting

Few layer graphene from mechanical exfoliation of graphite based materials. Structure-dependent characteristics

Facial fabrication of few-layer functionalized graphene with sole functional group through Diels–Alder reaction by ball milling

One-step preparation of graphene nanosheets via ball milling of graphite and the application in lithium-ion batteries

Synthesis of Graphene Flakes Using a Non-Thermal Plasma Based on Magnetically Stabilized Gliding Arc Discharge

Preparation of Colloidal Dispersions of Graphene Sheets in Organic Solvents by Using Ball Milling

Continuous synthesis of graphene nano-flakes by magnetically rotating arc at atmospheric pressure

Field Emission Characteristics from Vertical Few-Layer Graphene Growth on Graphite Substrate

Preparation of Nitrogen-doped Holey Multilayer Graphene Using High-Energy Ball Milling of Graphite in Presence of Melamine

Plasma Assisted Milling Treatment for Improving Mechanical and Electrical Properties of In-Situ Grown Graphene/copper Composites

Continuous synthesis of graphene nano-flakes by non-thermal plasma with a magnetically rotating arc at atmospheric pressure

Large-scale and Green Production of Multi-Layer Graphene in Deep Eutectic Solvents

Facile synthesis of high-performance LiFePO4-reduced graphene oxide composites using ball milling

Optimize the Field Emission Character of a Vertical Few-Layer Graphene Sheet by Manipulating the Morphology.