Abstract:A robust feed forward current predictive control algorithm was proposed to solve the problem that the deadbeat current predictive control of surface mounted permanent magnet synchronous motor（PMSM） causes the system instability and the d, q axis current oscillates greatly due to the motor parameter deviation. Firstly, the reference current at the previous time and the sampling current at the current time were used to replace the sampling current at the current time in the traditional voltage prediction formula to change the close-loop transfer function of the sampling current and reference current, and then the robust factor was used to adjust the stability margin of the system to improve the robustness and stability margin of the control system. The simulation results showed that when the model inductance was 2 and 4 times of the reference inductance respectively, the variance of the proposed robust feedforward current predictive control algorithm was reduced by 61.5% and 67.3% compared with the traditional algorithm. In addition, to solve the problem that the steady state current static error expands when the motor parameters are mismatched, an incremental current static error elimination algorithm was proposed. Firstly, the given voltage at the next time was calculated by the difference between the predicted voltage, actual current and reference current at the adjacent time to eliminate the influence of motor flux parameters on the static error of steady state current. Then, the error between actual current and reference current was used to compensate the given voltage to reduce the static error of steady state current. The simulation results showed that when the flux linkage of the model was 0.5 times, 0.4 times and 0.375 times of the reference flux linkage, respectively. The error of the proposed incremental current static error elimination algorithm was reduced by 38.69%, 56.94% and 54.66% compared with the traditional algorithm for q-axis current.

An Incremental Predictive Current Control for PMSM with Small or Saturated Inductance

An Adaptive Incremental Predictive Current Control Method of PMSM

A Fast Response Robust Deadbeat Predictive Current Control for Permanent Magnet Synchronous Motor

Current Control for PMSM Based on Model Predictive Control with Automatic Differentiation

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

An Incremental Deadbeat Predictive Current Control Method for PMSM with Low Sensitivity to Parameter Variation

Adaptive incremental predictive control method for current of PMSM based on online identification of inductance

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

A Robust Deadbeat Predictive Current Control Method for IPMSM

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

Expanding Parameter Stability Region for Incremental Predictive Control Strategy of Current

Prediction Error Analysis of Finite-Control-Set Model Predictive Current Control for IPMSMs

A Robust Predictive Current Controller With Incremental Model And Inductance Observer For Pmsm Drive

Current control method for PMSM with high dynamic performance

An Improved Predictive Current Control Method for Permanent Magnet Synchronous Motors

An Improved Implicit Model Predictive Current Control With Continuous Control Set for PMSM Drives

Optimization Algorithm of Deadbeat Current Predictive Control for Permanent Magnet Synchronous Motor

Model Predictive Current Control of Permanent Magnet Synchronous Motor Based on Extended Kalman Filter