Abstract:Field measurements and data investigations were conducted for developing an emission factor database for inventories of atmospheric pollutants from Chinese coal-fired power plants. Gaseous pollutants and particulate matter (PM) of different size fractions were measured using a gas analyzer and an electric low-pressure impactor (ELPI), respectively, for ten units in eight coal-fired power plants across the country. Combining results of field tests and literature surveys, emission factors with 95% confidence intervals (CIs) were calculated by boiler type, fuel quality, and emission control devices using bootstrap and Monte Carlo simulations. The emission factor of uncontrolled SO2 from pulverized combustion (PC) boilers burning bituminous or anthracite coal was estimated to be 18.0Skgt−1 (i.e., 18.0×the percentage sulfur content of coal, S) with a 95% CI of 17.2S–18.5S. NOX emission factors for pulverized-coal boilers ranged from 4.0 to 11.2kgt−1, with uncertainties of 14–45% for different unit types. The emission factors of uncontrolled PM2.5, PM10, and total PM emitted by PC boilers were estimated to be 0.4A (where A is the percentage ash content of coal), 1.5A and 6.9Akgt−1, respectively, with 95% CIs of 0.3A–0.5A, 1.1A–1.9A and 5.8A–7.9A. The analogous PM values for emissions with electrostatic precipitator (ESP) controls were 0.032A (95% CI: 0.021A–0.046A), 0.065A (0.039A–0.092A) and 0.094A (0.0656A–0.132A)kgt−1, and 0.0147A (0.0092–0.0225A), 0.0210A (0.0129A–0.0317A), and 0.0231A (0.0142A–0.0348A) for those with both ESP and wet flue-gas desulfurization (wet-FGD). SO2 and NOX emission factors for Chinese power plants were smaller than those of U.S. EPA AP-42 database, due mainly to lower heating values of coals in China. PM emission factors for units with ESP, however, were generally larger than AP-42 values, because of poorer removal efficiencies of Chinese dust collectors. For units with advanced emission control technologies, more field measurements are needed to reduce emission factor uncertainties.

Decomposition Analysis on the Air Pollutant Baseline Emission Factors in China's Power Sector

Decomposing Chinese industrial SO2 emission change index.

Ambient air quality impact of emissions from thermal power industry

Quantifying Baseline Emission Factors of Air Pollutants in China'S Regional Power Grids

Decomposition Analysis Of The Factors That Influence Energy Related Air Pollutant Emission Changes In China Using The Sda Method

What Factors Drive Air Pollutants In China? An Analysis From The Perspective Of Regional Difference Using A Combined Method Of Production Decomposition Analysis And Logarithmic Mean Divisia Index

Evaluating the environmental value of pollutants in China power industry

Decomposition Analysis Of Factors That Drive The Changes Of Major Air Pollutant Emissions In China At A Multi-Regional Level

Impacts of Power Generation on Air Quality in China—part I: an Overview

Recent Trends of Energy Consumption and Air Pollution in China

Primary air pollutant emissions of coal-fired power plants in China: Current status and future prediction

NO&lt;sub&gt;x&lt;/sub&gt; Emissions in China: Historical Trends and Future Perspectives

High resolution power emission inventory for China based on CEMS in 2015

NO<sub>x</sub> emissions in China: historical trends and future perspectives

Benefits of Current and Future Policies on Emissions of China's Coal-Fired Power Sector Indicated by Continuous Emission Monitoring.

Establishment of a database of emission factors for atmospheric pollutants from Chinese coal-fired power plants

Estimating Mitigation Potential and Cost for Air Pollutants of China's Thermal Power Generation: A GAINS-China Model-Based Spatial Analysis

Regional Analysis of Air Quality Control in China’s Power Sector

Atmospheric emission inventory of SO3 from coal-fired power plants in China in the period 2009–2014

Study of the emissions and spatial distributions of various power-generation technologies in China

What Factors Influence PM2.5 Emissions in China? an Analysis of Regional Differences Using a Combined Method of Data Envelopment Analysis and Logarithmic Mean Divisia Index.