Abstract:This article proposes a unified design method for a highly efficient wideband transmissive linear-to-circular polarization converter composed of two orthogonal adjacent-order bandpass filtering elements for the first time. First, the linear-to-circular polarization converter is constructed to convert two orthogonal linearly polarized (LP) spatial waves split from a 45°-slant incident plane wave into a desired circularly polarized (CP) wave. Taking advantage of the wideband filter synthesis method and phase shifter theory, polarization converter elements with prescribed specifications [e.g., fractional bandwidth (FBW) and Chebyshev passband ripple] are then synthesized by the corresponding low-characteristic-impedance bandpass filtering networks with the loading of shunt short-circuited stubs on quarter-wavelength transmission line (TL) sections. The adjacent-order phase difference function with a natural ±90° value at a center frequency can be simultaneously manipulated by a filtering bandwidth. The theoretical axial ratio (AR) curve is calculated by the synthesized magnitude responses and phase deviation (PD) function. The design guideline is then summarized. Finally, based on the third- and fourth-order bandpass filtering networks, a prototype of the proposed linear-to-circular polarization converter operating at 5 GHz with a designable 70% 3 dB AR bandwidth is implemented, fabricated, and tested by the free-space measurement method. The transmitted CP wave with three in-band AR minima and relatively stable angular performances can be efficiently converted from the incident LP spatial wave as well verified in the experiment. The AR curves and design requirements of different adjacent-order bandpass filtering combinations are further explored according to the proposed design guideline.

Single-layer Linear-to-Circular Polarization Transformer Based on Periodic Strips Array

Fission Transmission Linear-to-Circular Polarization Conversion Based on Compact Bi-Layer Structure

Asymmetric Fission Transmission of Linear-to-Circular Polarization Converter Using Bi-layer Split Ring Structure

Multiband Circular Polarizer Based on Fission Transmission of Linearly Polarized Wave for X-Band Applications

A Circularly Polarized Array Antenna Based on Circular Polarizer

A Broadband Ultra-Thin Polarization Rotator Using Periodically Loaded Parallel Strip-Lines

Design of Circular/Dual-Frequency Linear Polarization Antennas Based on the Anisotropic Complementary Split Ring Resonator

Broadband Wide-Angle Linear-to-Circular Polarization Converter Based on Metal Strips Loaded Metasurface

Double-layer broadband circular polarizer based on fission transmission of linear polarization for ku-band applications: MANGI et al.

Design of Linear-to-Circular Polarization Transformers Made of Long Densely Packed Metallic Helices

Achieving wide-band linear-to-circular polarization conversion using ultra-thin bi-layered metasurfaces

Linear to Circular Polarization Converter with Third Order Meta-Frequency Selective Surfaces

Polarization-Reconfigurable Flat Transmitarray Based on Square Frame and Crossed Dipole Elements.

Circular polarization transmitarray element with linear polarization feed

Low-Profile Reflective Surface for Multi-Band Linear-to-Linear and Linear-to-Circular Polarization Conversion

Circularly Polarized Scanning Phased Array Antenna Based on Circular Polarizer

Single layer dual wideband linear to circular polarisation converter with integrated parasitic elements

Circular-to-linear Polarization Converter Based on Composite Via-Coupled Patch Frequency Selective Surfaces

Orthogonal Adjacent-Order Filtering Element-Based Wideband Transmissive Linear-to-Circular Polarization Converter

A linear-to-circular polarization converter with half transmission and half reflection using a single-layered metamaterial

A linear to circular polarization reconfigurable converter based on frequency selective surface