Abstract:A short polarization beam splitter (PBS) is presented based on an asymmetrical evanescent coupling system, which consists of a narrow input waveguide, a narrow output waveguide, and a wide middle optical waveguide between them. The width of the waveguides is designed so that the phase-matching condition is satisfied for the TM fundamental (TM0) mode in the narrow input/output waveguide and the first higher order TM (TM1) mode in the wide middle waveguide. Meanwhile, there is a significant phase mismatch for the case with TE polarization. Therefore, for the launched TE polarized light, almost no coupling happens when it goes through the coupling region and finally the TE polarized light is output from the through port. For the launched TM0 mode in the narrow input waveguide, it is completely coupled to the TM1 mode in the wide middle waveguide by choosing the optimal length of the coupling region. Furthermore, the TM1 mode excited in the wide middle waveguide is then coupled to the TM0 mode in the narrow output waveguide through the evanescent coupling between them. A short (similar to 25 mu m long) PBS is designed based on silicon-on-insulator nanowires, while the gap width is chosen as large as 300 nm to make the fabrication easy. Numerical simulations show that the present PBS has a good fabrication tolerance for the variation of the waveguide width ( more than +/- 20nm) and a broadband (similar to 50 nm) for an extinction ratio of >15 dB.

Extremely small polarization beam splitter based on a multimode interference coupler with a silicon hybrid plasmonic waveguide

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Ultracompact and broadband polarization beam splitter utilizing the evanescent coupling between a hybrid plasmonic waveguide and a silicon nanowire

Ultracompact polarization beam splitter based on hybrid plasmonic waveguide

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Ultra-compact Polarization Splitter Based on a Multimode Interference Coupler with a Silicon Hybrid Plasmonic Waveguide

Compact Polarization Beam Splitter Based on a Three-Waveguide Asymmetric Coupler with a 340-Nm-thick Silicon Core Layer

CMOS-compatible and Fabrication-Tolerant MMI-based Polarization Beam Splitter

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Polarization Beam Splitter Based on Cascaded Step-Size Multimode Interference Coupler

Silicon Polarization Beam Splitter Based on an Asymmetrical Evanescent Coupling System with Three Optical Waveguides

Ultrashort broadband polarization beam splitter based on a combined hybrid plasmonic waveguide

On-chip Polarization Splitter Based on a Multimode Plasmonic Waveguide

Compact and Broadband Polarization Beam Splitter on Lithium-Niobate-on-insulator Using a Hybrid Plasmonic Waveguide

Ultrashort and Ultrabroadband Silicon Polarization Beam Splitter Based on a Bent Directional Coupler

Compact and broadband polarization beam splitter based on a bridged hybrid plasmonic waveguide coupler on a thin-film lithium niobate

Polarization beam splitter based on a silicon nitride-silica-silicon horizontal slot waveguide

Ultracompact and Broadband Polarization Beam Splitter Based on Polarization-Dependent Critical Guiding Condition

Novel ultra-short and ultra-broadband polarization beam splitter based on a bent directional coupler

Compact Polarization Beam Splitter for Silicon Photonic Integrated Circuits with a 340-Nm-thick Silicon Core Layer.