Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Thermal Performance Analysis of A Novel Pcm Capsule in Red Blood Cell Shape

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Numerical Study of Forced Convection over Phase Change Material Capsules in a Traditional Spherical Shape and a Biomimetic Shape

Unconstrained Melting Heat Transfer of Nano-Enhanced Phase-Change Materials in a Spherical Capsule for Latent Heat Storage: Effects of the Capsule Size

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Experimental and Numerical Study on Flow Characteristic and Thermal Performance of Macro-Capsules Phase Change Material with Biomimetic Oval Structure

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

An Experimental Study of Inward Solidification of Nano-Enhanced Phase Change Materials (nepcm) Inside A Spherical Capsule

Biomimetically Calabash-Inspired Phase Change Material Capsule: Experimental and Numerical Analysis on Thermal Performance and Flow Characteristics

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Thermal Performance Analysis and Optimization of a Spherical PCM Capsule with Pin-Fins for Cold Storage

Performance analysis of melting behavior of phase change material encapsulated within differently shaped macro-capsule

Thermal Performance Analysis of PCM Capsules Packed-Bed System with Biomimetic Leaf Hierarchical Porous Structure

Biomimetic phase change capsules with conch shell structures for improving thermal energy storage efficiency

Numerical Simulation on the Impact of Dimpled Structure on Flow and Thermal Performance in Phase-Change Spherical Capsules Within Confined Spaces

Numerical Study on Thermal Performance and Flow Characteristic of Phase Change Material Heat Storage Unit with Capsule-Shaped Structure

Analysis of the Thermal Performance of Thermal Energy Storage Systems Using PCM Capsules

Shape Memory of Elastic Capsules under the Effect of Spontaneous Shape

Numerical Investigation on Flow Characteristics and Thermal Performance of Phase Change Material in Spherical Capsules with Smooth or Dimpled Surfaces