Abstract:Numerical simulations were performed to investigate the effects of equivalence ratio distribution on the combustion performance of a liquid kerosene fueled dual-staged scramjet combustor. High enthalpy vitiat-ed inflow at a total temperature of 1231K was supplied using a hydrogen-combustion heater. The Mach number at combustor inlet was 2.0. The fuel was injected into the combustor using crossed dual-strut. The global equiva-lence ratio was held constant to be 0.8,and three injection distribution schemes were conducted. The two-equa-tion k-ωSST turbulence model was adopted to simulate the turbulence. The discrete phase model was utilized to predict the breakup, atomization, evaporation, and the coupling with the continuous phase of the liquid kero-sene. The partial-premixed steady flame model was applied to consider the turbulence-combustion interaction. The n-decane was selected as the surrogate fuel of kerosene. Its skeletal mechanism included 40 species and 141 steps. The calculated wall pressure profiles in three fuel distribution schemes agreed well with the experimental values, illustrating that the present numerical method can provide a relatively accurate description of the super-sonic combustion process of high molecular hydrocarbon fuels.Further analysis on the reacting flow field demon-strated that two reaction regions occurred in the combustor: the upstream reaction region was anchored at the trailing edge of the upstream strut,and the downstream one at the trailing edge of the downstream strut. With the upstream equivalence ratio increased from 0.1 to 0.3,the upstream reaction region was gradually trans-ferred from its symmetric structure located in the vertical middle of the flow path to an asymmetric structure inclined towards the corner of the bottom and side walls;while the downstream one was contracted. The origi-nal location of the pre-combustion shock train propagated upstream. The flow entering into the upstream re-action region was gradually transferred from supersonic to subsonic,while that entering into the downstream reaction region from subsonic to supersonic. The exit total pressure recovery coefficient monotonically in-creased from 37.6% to 41.1%,while the net thrust was monotonically decreased from 366.4N to 331.8N. However,there was no monotonic correlation between the exit combustion efficiency with the upstream equivalence ratio.

Numerical and Experimental Investigation of Improving Combustion Performance of Variable Geometry Dual-Mode Combustor

Numerical Studies for Performance Improvement of A Variable Geometry Dual Mode Combustor by Optimizing Deflection Angle

Experimental and Numerical Investigation on Hysteresis Characteristics and Formation Mechanism for a Variable Geometry Dual-Mode Combustor

Investigation of Performance and Mode Transition in a Variable Divergence Ratio Dual-Mode Combustor

Experimental Investigation on Performance Variation and Dynamic Characteristics of a Variable Geometry Rocket-Based Combined Cycle Combustor

Numerical Investigation on Performance of Axisymmetric Variable Geometry Scramjet Combustor Equipped with Strut Flame Holder

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Experimental Research on the Stability Margin of a Variable Geometry Scramjet Combustor in Wide Flight Conditions

Aerodynamic performance enhancement of a variable-geometry dual-mode combustor designed by the method of characteristics

Experimental study on the effect of combustor configuration on the performance of dual-mode combustor

Numerical Investigation on Combustion Performance Optimization with Strut/Wall Combined-Staged Injection Strategy Within an Axisymmetric Variable Geometry Combustor at Mach 3

Pressure Rising Slope Variation Accompanying with Combustion Mode Transition in a Dual-Mode Combustor

Numerical Exploration of Mixing and Combustion in a Dual-Mode Combustor with Backward-Facing Steps

Numerical and Experimental Study on the Solid-Fuel Scramjet Combustor

Numerical and Experimental Investigation of a Non-Premixed Double Swirl Combustor

Numerical Investigation on Effects of Equivalence Ratio Distribution on Performance of Scramjet Combustor with Dual-Staged Injections

Flame Stability Enhancement and Output Performance Optimization of a Dual Reaction Zone Recirculating Micro-Combustor

Effect of Continuous Mach Number Variation of Incoming Flow on Ram–scram Transition in a Dual-Mode Combustor

Numerical Investigation on Aerodynamic and Combustion Performance of Chevron Mixer Inside an Afterburner.

Research on Combustion Characteristics of the Strut-Equipped Variable Geometry Scramjet Combustor at Mach 2 Condition

Experimental Studies of the Primary Zone Flow Field and Combustion Performance of A Triple Swirler Combustor