Abstract:To address the issue of centrifugal force affecting the vertical load during the stability and trajectory planning of autonomous vehicles during high-speed cornering and obstacle avoidance, a model predictive control of trajectory planning and tracking is proposed that considers the roll factor using only a two-degrees-of-freedom vehicle dynamics model. Firstly, a trajectory planning controller is designed. As a predictive model, a dual-track two-degrees-of-freedom vehicle dynamics model is established. This model describes the relationship between tire lateral forces and vertical loads using a quadratic nonlinear tire model. To reflect the actual dynamic state of the vehicle, the controller incorporates a nonlinear constraint that considers vertical load variations. The nonlinear optimization problem is transformed into a simplified quadratic programming problem by using the Jacobian matrix method to linearize the constraints. By fitting a fourth-degree polynomial curve to the discrete points calculated by the replanning algorithm, an optimal collision-free trajectory is obtained. Secondly, an MPC trajectory tracking controller is designed to control the vehicle in real time along the optimal trajectory from the planning, incorporating control quantity constraints, control increment constraints, and lateral angle constraints to maintain the vehicle's motion state. We transform the trajectory tracking control problem into a quadratic programming problem, solving for the optimal control sequence for the autonomous vehicle to track the trajectory, achieving an optimized solution and rolling time domain control. Finally, the effectiveness of the vehicle's obstacle avoidance planning and tracking under high-speed double-lane-change maneuver conditions is validated using the Simulink simulation platform. The results indicate that the designed planning and tracking controllers effectively improve the obstacle avoidance planning and tracking control for high-speed autonomous vehicles.

Model Predictive Control For Ugv Trajectory Tracking Based On Dynamic Model

Trajectory Tracking Control for Flapping-wing UAV Based on Model-Free Predictive Control

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Model Predictive Longitudinal Motion Control for the Unmanned Ground Vehicle with a Trajectory Tracking Model

Nonlinear Dynamics Based Trajectory Tracking Robust Control of Unmanned Ground Vehicle

Research for Nonlinear Model Predictive Controls to Laterally Control Unmanned Vehicle Trajectory Tracking

Multi-constrained Model Predictive Control for Autonomous Ground Vehicle Trajectory Tracking

A Model Predictive Based UUV Control Design from Kinematic to Dynamic Tracking Control

A New Trajectory Tracking Algorithm for Autonomous Vehicles Based on Model Predictive Control

Isolating Trajectory Tracking from Motion Control: A Model Predictive Control and Robust Control Framework for Unmanned Ground Vehicles

Model Predictive Control-based Trajectory Tracking Control Method for Unmanned Surface Vessels.

MPC-TD3 Trajectory Tracking Control for Electrically Driven Unmanned Tracked Vehicles

Research on the Model Predictive Trajectory Tracking Control of Unmanned Ground Tracked Vehicles

Mpc-Based Path Tracking Controller Design For Autonomous Ground Vehicles

Model free predictive path tracking control of variable-configuration unmanned ground vehicle

Method for the Trajectory Tracking Control of Unmanned Ground Vehicles Based on Chaotic Particle Swarm Optimization and Model Predictive Control

Design of Trajectory Tracking Controller of Unmanned Tracked Vehicles Based on Torque Control

Practical Nonlinear Model Predictive Controller Design for Trajectory Tracking of Unmanned Vehicles

Variable step MPC trajectory tracking control method for intelligent vehicle

MPC-based Unified Trajectory Planning and Tracking Control Approach for Automated Guided Vehicles*

Model Predictive Control for Trajectory Planning Considering Constraints on Vertical Load Variation