Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Design and reliability analysis for underwater control system in OUC-Raman instrument node of seafloor observatory network

Research on Monitor Information System in Seafloor Observatory Network

Development of an AUV “Xuanwu-1” with Docking Function

Design and Implementation of the Seabed Dynamic Environment Monitoring System Based on Ocean Observing Network

Developing a Power Monitoring and Protection System for the Junction Boxes of an Experimental Seafloor Observatory Network.

Underwater Mobile Platform Data Acquisition and Transmission System Design

The Meishan Bay Underwater Observatory System

Fault Detection and Isolation Methods in Subsea Observation Networks

Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

Design and Implementation of Seafloor Observatory Network Camera System

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

The Xiangshan IOUT Digital Branch Unit

Study On The Short Fault Isolation Of Cabled Ocean Observatory

An Air-Sea-Ground Integrated Observation System Based on Ad Hoc Network for the Archipelagic Environment

Design of a multiparameter data acquisition and control system for in situ seabed observation base stations

A test system for cabled ocean observatories

Development of a Scientific Instrument Interface Module for Cabled Seafloor Observatories Based on Industrial Control Technology

A Survey of Ranging Algorithms and Localization Schemes in Underwater Acoustic Sensor Network

Study on Remote Electric Power Monitoring and Control System of Deep Seafloor Observatory Network

Design of motion control system of pipeline detection AUV

Research on an Extensible Monitoring System of a Seafloor Observatory Network in Laizhou Bay