Abstract:In comparison with conventional laser beam welding, double-sided laser beam welding has two laser heat sources simultaneously and symmetrically loaded from both sides makes it to be a more complicated coupled heat transport and fluid flow process. In this work, in order to understand the heat transfer and fluid flow, a three-dimensional model was developed and validated with the experimental results. The temperature field, fluid flow field, and keyhole characteristic were calculated using the developed model by FLUENT software. Calculated results indicated that the temperature and fluid flow fields were bilateral symmetry along the stringer center, and the molten pool maximum length was located near the keyhole intersection position. The skin side had higher temperature and faster cooling speed. Several characteristic flow patterns in the weld pool cross section, including the vortexes flows near the keyhole opening position, the convection flows above the keyhole intersection location, the regularity downward flows at the molten pool bottom. And in the lengthwise section, a distinct vortex flow below the keyhole, and the liquid metal behind the keyhole first flowed to near the molten pool maximum length location and then to the molten pool surface. Perpendicular to and along welding direction the keyhole liquid metal flowed to the weld molten pool surface and around the keyhole, respectively. The special temperature fields and fluid flow patterns were closely related to the effects of the double sides' laser energy coupling and enhancement. The calculated weld pool geometry basically in good agreement with the experimental results indicated that the developed model was validity and reasonable.

A Three-Dimensional Numerical Simulation Model for Weld Characteristics Analysis in Fiber Laser Keyhole Welding

The Prediction of the Whole Weld in Fiber Laser Keyhole Welding Based on Numerical Simulation

Investigation on the Weld Bead Profile Transformation with the Keyhole and Molten Pool Dynamic Behavior Simulation in High Power Laser Welding

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Experimental and Numerical Analysis of Molten Pool and Keyhole Profile During High-Power Deep-Penetration Laser Welding

Prediction of Weld Shape for Fiber Laser Keyhole Welding Based on Finite Element Analysis

Numerical analysis of weld bead formation process in the dissimilar material fiber laser welding

Visualization and simulation of 1700MS sheet laser welding based on three-dimensional geometries of weld pool and keyhole

Numerical Simulation of Heat Transfer and Fluid Flow During Double-Sided Laser Beam Welding of T-Joints for Aluminum Aircraft Fuselage Panels

3D Transient Multiphase Model for Keyhole, Vapor Plume, and Weld Pool Dynamics in Laser Welding Including the Ambient Pressure Effect

Numerical Simulation for Temperature Field in Molten Pool of Deep Penetration Laser Welding of High Strength Steel

Numerical simulation of the molten pool character in high power fiber laser welding

An Octree-Based Adaptive Mesh Refinement Method for Three-Dimensional Modeling of Keyhole Mode Laser Welding

3d Multiphysical Modelling Of Fluid Dynamics And Mass Transfer In Laser Welding Of Dissimilar Materials

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding

Molten flow simulation of laser deep penetration welding of aluminum alloys

Numerical Analysis of Dynamic Coupling Between the Keyhole and Molten Pool in the Rotating Laser Welding Process of Aluminum Alloy

Numerical Simulation of Keyhole Morphology and Molten Pool Flow Behavior in Aluminum Alloy Electron-Beam Welding

Fluid Flow and Weld Pool Dynamics in Dual-Beam Laser Keyhole Welding

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

Numerical Simulation of Spatter Formation During Fiber Laser Welding of 5083 Aluminum Alloy at Full Penetration Condition