Abstract:In the Laser Powder Bed Fusion (L-PBF) process, 3D components with complex geometries are fabricated in a layer-by-layer fashion by using a controlled laser beam to selectively melt particular regions of the metal powder bed. However, due to the stochastic nature of the L-PBF process, the top surface roughness of each solidified layer tends to be different even when the optimal processing conditions for the different positions on the build plate are employed. As a result, the mechanical properties of the built components frequently vary from one component to the next. Accordingly, this study proposes an Intelligent Additive Manufacturing Architecture (IAMA) for controlling the surface roughness of each build layer through an appropriate adjustment of the laser re-melting parameters. The IAMA architecture comprises five modules, namely In-Situ Metrology (ISM), Ex-Situ Metrology (ESM), Automatic Virtual Metrology (AVM), Additive Manufacturing Simulation (AMS) and Intelligent Compensator (IC). The feasibility of the proposed architecture is demonstrated by comparing the top surface roughness of cubic and mechanical strengths of tensile test samples built using the proposed method with those built using a traditional L-PBF approach without surface roughness control. It is found that the samples fabricated using the IAMA approach have an average top surface roughness of $1.6~\mu \text{m}$ and a standard deviation is $0.7~\mu \text{m}$ . By contrast, the samples produced using the traditional L-PBF approach have an average surface roughness of $13.45~\mu \text{m}$ and a standard deviation of $2.5~\mu \text{m}$ . In addition, the specimens produced with the assistance of IAMA architecture have an average tensile strength of 1013 MPa with a standard deviation of 69.5 MPa, while those printed without surface roughness control have an average tensile strength of 903 MPa with a standard deviation of 101.4 MPa Note to Practitioners—As L-PBF produce part in a layer-by-layer manner, therefore, the roughness on the top surface of previous layer have a strong influence on the printing quality of current layer. The variations of surface roughness will lead to the fluctuation of mechanical properties of the fabricated components. Additionally, to the best of author’s knowledge, current commercial L-PBF machines can not actively control the surface roughness of samples during the process. The proposed IAMA in this work can predict and control the roughness on the top surface of each layer during L-PBF process. Therefore, the constructed architecture has strong potential for integrating into the commercial L-PBF machine for controlling the surface roughness on the top of the parts during the manufacturing process. As a result, the quality of the fabricated components is expected to be in consistent. Accordingly, L-PBF machine equipped with IAMA will have a strong potential in applying for mass production of the components in aerospace and automobile industries.

High-performance Surface Layer Manufacturing：A Precision Processing Method Based on Controllable Surface Integrity

A Facile and Sustainable Integrated Fabrication Strategy for Multi-Performance 316l Stainless Steel

Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Collaborative manufacturing technologies of structure shape and surface integrity for complex thin-walled components of aero-engine: Status, challenge and tendency

Application of optimized laser surface re-melting process on selective laser melted 316L stainless steel inclined parts

(Digital Presentation) Understanding Metal Additive Manufactured Surfaces

Collaborative formation pattern of surface topography and residual stress in hard turning of steels

Surface wettability patterning of metal additive manufactured parts via laser-assisted functionalization

High-performance Optical Manufacturing

Improving the surface characteristics of additively manufactured parts: A review

Development of Laser Surface Modification Technology

Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities

Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests

Integration of interlayer surface enhancement technologies into metal additive manufacturing: A review

Intelligent Additive Manufacturing Architecture for Enhancing Uniformity of Surface Roughness and Mechanical Properties of Laser Powder Bed Fusion Components

High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components

Optimization of high-speed milling hardened mold processing parameters based on surface morphology research

Forming mechanism of a novel shape-surface integrated incremental sheet forming process for fabricating parts with enhanced surface functionality

Surface Treatment And Planarization